0fcbdf9767784e851b198d52825e5607b4cc8bdd
[platform/kernel/u-boot.git] / include / configs / gw_ventana.h
1 /*
2  * Copyright (C) 2013 Gateworks Corporation
3  *
4  * SPDX-License-Identifier: GPL-2.0+
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /* SPL */
11 /* Location in NAND to read U-Boot from */
12 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
13
14 /* Falcon Mode */
15 #define CONFIG_CMD_SPL
16 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
17 #define CONFIG_CMD_SPL_WRITE_SIZE       (128 * SZ_1K)
18
19 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
20 #define CONFIG_CMD_SPL_NAND_OFS         (17 * SZ_1M)
21 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
22
23 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x800   /* 1MB */
25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  (CONFIG_CMD_SPL_WRITE_SIZE / 512)
26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000  /* 2MB */
27
28 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
29 #include "mx6_common.h"
30 #define CONFIG_DISPLAY_BOARDINFO_LATE
31
32 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
33
34 /* Serial ATAG */
35 #define CONFIG_SERIAL_TAG
36
37 /* Size of malloc() pool */
38 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
39
40 /* Init Functions */
41 #define CONFIG_MISC_INIT_R
42
43 /* Driver Model */
44 #ifndef CONFIG_SPL_BUILD
45 #define CONFIG_DM_GPIO
46 #define CONFIG_DM_THERMAL
47 #endif
48
49 /* Thermal */
50 #define CONFIG_IMX_THERMAL
51
52 /* Serial */
53 #define CONFIG_MXC_UART
54 #define CONFIG_MXC_UART_BASE           UART2_BASE
55
56 #ifdef CONFIG_SPI_FLASH
57
58 /* SPI */
59 #ifdef CONFIG_CMD_SF
60   #define CONFIG_MXC_SPI
61   #define CONFIG_SPI_FLASH_MTD
62   #define CONFIG_SPI_FLASH_BAR
63   #define CONFIG_SF_DEFAULT_BUS              0
64   #define CONFIG_SF_DEFAULT_CS               0
65                                              /* GPIO 3-19 (21248) */
66   #define CONFIG_SF_DEFAULT_SPEED            30000000
67   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
68 #endif
69
70 #elif defined(CONFIG_SPL_NAND_SUPPORT)
71 /* Enable NAND support */
72 #define CONFIG_CMD_NAND
73 #define CONFIG_CMD_NAND_TRIMFFS
74 #ifdef CONFIG_CMD_NAND
75   #define CONFIG_NAND_MXS
76   #define CONFIG_SYS_MAX_NAND_DEVICE    1
77   #define CONFIG_SYS_NAND_BASE          0x40000000
78   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
79   #define CONFIG_SYS_NAND_ONFI_DETECTION
80
81   /* DMA stuff, needed for GPMI/MXS NAND support */
82   #define CONFIG_APBH_DMA
83   #define CONFIG_APBH_DMA_BURST
84   #define CONFIG_APBH_DMA_BURST8
85 #endif
86
87 #endif /* CONFIG_SPI_FLASH */
88
89 /* I2C Configs */
90 #define CONFIG_SYS_I2C
91 #define CONFIG_SYS_I2C_MXC
92 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
93 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
94 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
95 #define CONFIG_SYS_I2C_SPEED            100000
96 #define CONFIG_I2C_GSC                  0
97 #define CONFIG_I2C_EDID
98
99 /* MMC Configs */
100 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
101
102 /* eMMC Configs */
103 #define CONFIG_SUPPORT_EMMC_BOOT
104 #define CONFIG_SUPPORT_EMMC_RPMB
105
106 /* Filesystem support */
107 #define CONFIG_CMD_UBIFS
108
109 /*
110  * SATA Configs
111  */
112 #define CONFIG_CMD_SATA
113 #ifdef CONFIG_CMD_SATA
114   #define CONFIG_DWC_AHSATA
115   #define CONFIG_SYS_SATA_MAX_DEVICE    1
116   #define CONFIG_DWC_AHSATA_PORT_ID     0
117   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
118   #define CONFIG_LBA48
119   #define CONFIG_LIBATA
120 #endif
121
122 /*
123  * PCI express
124  */
125 #define CONFIG_CMD_PCI
126 #ifdef CONFIG_CMD_PCI
127 #define CONFIG_PCI_SCAN_SHOW
128 #define CONFIG_PCI_FIXUP_DEV
129 #define CONFIG_PCIE_IMX
130 #endif
131
132 /*
133  * PMIC
134  */
135 #define CONFIG_POWER
136 #define CONFIG_POWER_I2C
137 #define CONFIG_POWER_PFUZE100
138 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
139 #define CONFIG_POWER_LTC3676
140 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
141
142 /* Various command support */
143 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
144 #define CONFIG_CMD_GSC
145 #define CONFIG_CMD_UNZIP         /* gzwrite */
146 #define CONFIG_RBTREE
147
148 /* Ethernet support */
149 #define CONFIG_FEC_MXC
150 #define CONFIG_MII
151 #define IMX_FEC_BASE             ENET_BASE_ADDR
152 #define CONFIG_FEC_XCV_TYPE      RGMII
153 #define CONFIG_FEC_MXC_PHYADDR   0
154 #define CONFIG_ARP_TIMEOUT       200UL
155
156 /* USB Configs */
157 #define CONFIG_USB_HOST_ETHER
158 #define CONFIG_USB_ETHER_ASIX
159 #define CONFIG_USB_ETHER_SMSC95XX
160 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
161 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
162 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
163 #define CONFIG_MXC_USB_FLAGS      0
164 #define CONFIG_USBD_HS
165 #define CONFIG_USB_ETHER
166 #define CONFIG_USB_ETH_CDC
167 #define CONFIG_NETCONSOLE
168 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
169
170 /* USB Mass Storage Gadget */
171 #define CONFIG_USB_FUNCTION_MASS_STORAGE
172
173 /* Framebuffer and LCD */
174 #define CONFIG_VIDEO_IPUV3
175 #define CONFIG_VIDEO_LOGO
176 #define CONFIG_IPUV3_CLK          260000000
177 #define CONFIG_CMD_HDMIDETECT
178 #define CONFIG_IMX_HDMI
179 #define CONFIG_IMX_VIDEO_SKIP
180 #define CONFIG_VIDEO_BMP_LOGO
181 #define CONFIG_SPLASH_SCREEN_ALIGN
182 #define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */
183
184 /* Miscellaneous configurable options */
185 #define CONFIG_HWCONFIG
186 #define CONFIG_PREBOOT
187
188 /* Print Buffer Size */
189 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
190
191 /* Memory configuration */
192 #define CONFIG_SYS_MEMTEST_START       0x10000000
193 #define CONFIG_SYS_MEMTEST_END         0x10010000
194 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
195
196 /* Physical Memory Map */
197 #define CONFIG_NR_DRAM_BANKS           1
198 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
199 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
200 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
201 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
202
203 #define CONFIG_SYS_INIT_SP_OFFSET \
204         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
205 #define CONFIG_SYS_INIT_SP_ADDR \
206         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
207
208 /*
209  * MTD Command for mtdparts
210  */
211 #define CONFIG_LZO
212 #define CONFIG_CMD_MTDPARTS
213 #define CONFIG_MTD_DEVICE
214 #define CONFIG_MTD_PARTITIONS
215 #ifdef CONFIG_SPI_FLASH
216 #define MTDIDS_DEFAULT    "nor0=nor"
217 #define MTDPARTS_DEFAULT  \
218         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
219 #else
220 #define MTDIDS_DEFAULT    "nand0=nand"
221 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
222 #endif
223
224 /* Persistent Environment Config */
225 #ifdef CONFIG_SPI_FLASH
226   #define CONFIG_ENV_IS_IN_SPI_FLASH
227 #elif defined(CONFIG_SPL_NAND_SUPPORT)
228   #define CONFIG_ENV_IS_IN_NAND
229 #else
230   #define CONFIG_ENV_IS_IN_MMC
231 #endif
232 #if defined(CONFIG_ENV_IS_IN_MMC)
233   #define CONFIG_SYS_MMC_ENV_DEV         0
234   #define CONFIG_SYS_MMC_ENV_PART        1
235   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
236   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
237   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
238 #elif defined(CONFIG_ENV_IS_IN_NAND)
239   #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
240   #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
241   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
242   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
243   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
244 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
245   #define CONFIG_ENV_OFFSET             (512 * SZ_1K)
246   #define CONFIG_ENV_SECT_SIZE          (64 * SZ_1K)
247   #define CONFIG_ENV_SIZE               (8 * SZ_1K)
248   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
249   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
250   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
251   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
252 #endif
253
254 /* Environment */
255 #define CONFIG_IPADDR             192.168.1.1
256 #define CONFIG_SERVERIP           192.168.1.146
257
258 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
259         "pcidisable=1\0" \
260         "splashpos=m,m\0" \
261         "usb_pgood_delay=2000\0" \
262         "console=ttymxc1\0" \
263         "bootdevs=usb mmc sata flash\0" \
264         "hwconfig=_UNKNOWN_\0" \
265         "video=\0" \
266         \
267         "mtdparts=" MTDPARTS_DEFAULT "\0" \
268         "mtdids=" MTDIDS_DEFAULT "\0" \
269         "disk=0\0" \
270         "part=1\0" \
271         \
272         "fdt_high=0xffffffff\0" \
273         "fdt_addr=0x18000000\0" \
274         "initrd_high=0xffffffff\0" \
275         "fixfdt=" \
276                 "fdt addr ${fdt_addr}\0" \
277         "bootdir=boot\0" \
278         "loadfdt=" \
279                 "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
280                         "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
281                         "run fixfdt; " \
282                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
283                         "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
284                         "run fixfdt; " \
285                 "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
286                         "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
287                         "run fixfdt; " \
288                 "fi\0" \
289         \
290         "fs=ext4\0" \
291         "script=6x_bootscript-ventana\0" \
292         "loadscript=" \
293                 "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
294                         "source ${loadaddr}; " \
295                 "fi\0" \
296         \
297         "uimage=uImage\0" \
298         "mmc_root=mmcblk0p1\0" \
299         "mmc_boot=" \
300                 "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
301                 "mmc dev ${disk} && mmc rescan && " \
302                 "setenv dtype mmc; run loadscript; " \
303                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
304                         "setenv bootargs console=${console},${baudrate} " \
305                                 "root=/dev/${mmc_root} rootfstype=${fs} " \
306                                 "rootwait rw ${video} ${extra}; " \
307                         "if run loadfdt; then " \
308                                 "bootm ${loadaddr} - ${fdt_addr}; " \
309                         "else " \
310                                 "bootm; " \
311                         "fi; " \
312                 "fi\0" \
313         \
314         "sata_boot=" \
315                 "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
316                 "sata init && " \
317                 "setenv dtype sata; run loadscript; " \
318                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
319                         "setenv bootargs console=${console},${baudrate} " \
320                                 "root=/dev/sda1 rootfstype=${fs} " \
321                                 "rootwait rw ${video} ${extra}; " \
322                         "if run loadfdt; then " \
323                                 "bootm ${loadaddr} - ${fdt_addr}; " \
324                         "else " \
325                                 "bootm; " \
326                         "fi; " \
327                 "fi\0" \
328         "usb_boot=" \
329                 "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
330                 "usb start && usb dev ${disk} && " \
331                 "setenv dtype usb; run loadscript; " \
332                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
333                         "setenv bootargs console=${console},${baudrate} " \
334                                 "root=/dev/sda1 rootfstype=${fs} " \
335                                 "rootwait rw ${video} ${extra}; " \
336                         "if run loadfdt; then " \
337                                 "bootm ${loadaddr} - ${fdt_addr}; " \
338                         "else " \
339                                 "bootm; " \
340                         "fi; " \
341                 "fi\0"
342
343 #ifdef CONFIG_SPI_FLASH
344         #define CONFIG_EXTRA_ENV_SETTINGS \
345         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
346         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
347         "image_uboot=ventana/u-boot_spi.imx\0" \
348         \
349         "spi_koffset=0x90000\0" \
350         "spi_klen=0x200000\0" \
351         \
352         "spi_updateuboot=echo Updating uboot from " \
353                 "${serverip}:${image_uboot}...; " \
354                 "tftpboot ${loadaddr} ${image_uboot} && " \
355                 "sf probe && sf erase 0 80000 && " \
356                         "sf write ${loadaddr} 400 ${filesize}\0" \
357         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
358                 "to ${spi_koffset} ...; " \
359                 "tftp ${loadaddr} ${image_os} && " \
360                 "sf probe && " \
361                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
362         \
363         "flash_boot=" \
364                 "if sf probe && " \
365                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
366                         "setenv bootargs console=${console},${baudrate} " \
367                                 "root=/dev/mtdblock3 " \
368                                 "rootfstype=squashfs,jffs2 " \
369                                 "${video} ${extra}; " \
370                         "bootm; " \
371                 "fi\0"
372 #else
373         #define CONFIG_EXTRA_ENV_SETTINGS \
374         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
375         \
376         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
377         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
378                 "tftp ${loadaddr} ${image_rootfs} && " \
379                 "nand erase.part rootfs && " \
380                 "nand write ${loadaddr} rootfs ${filesize}\0" \
381         \
382         "flash_boot=" \
383                 "setenv fsload 'ubifsload'; " \
384                 "ubi part rootfs; " \
385                 "if ubi check boot; then " \
386                         "ubifsmount ubi0:boot; " \
387                         "setenv root ubi0:rootfs ubi.mtd=2 " \
388                                 "rootfstype=squashfs,ubifs; " \
389                         "setenv bootdir; " \
390                 "elif ubi check rootfs; then " \
391                         "ubifsmount ubi0:rootfs; " \
392                         "setenv root ubi0:rootfs ubi.mtd=2 " \
393                                 "rootfstype=ubifs; " \
394                 "fi; " \
395                 "setenv dtype nand; run loadscript; " \
396                 "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
397                         "setenv bootargs console=${console},${baudrate} " \
398                                 "root=${root} ${video} ${extra}; " \
399                         "if run loadfdt; then " \
400                                 "ubifsumount; " \
401                                 "bootm ${loadaddr} - ${fdt_addr}; " \
402                         "else " \
403                                 "ubifsumount; bootm; " \
404                         "fi; " \
405                 "fi\0"
406 #endif
407
408 #define CONFIG_BOOTCOMMAND \
409         "for btype in ${bootdevs}; do " \
410                 "echo; echo Attempting ${btype} boot...; " \
411                 "if run ${btype}_boot; then; fi; " \
412         "done"
413
414 #endif                         /* __CONFIG_H */