1 /* SPDX-License-Identifier: GPL-2.0+ */
4 * eInfochips Ltd. <www.einfochips.com>
5 * Written-by: Ajay Bhargav <contact@8051projects.net>
9 * Marvell Semiconductor <www.marvell.com>
10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
11 * Contributor: Mahavir Jain <mjain@marvell.com>
14 #ifndef __CONFIG_GPLUGD_H
15 #define __CONFIG_GPLUGD_H
18 * High Level Configuration Options
20 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
21 #define CONFIG_ARMADA100 1 /* SOC Family Name */
22 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */
23 #define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27 * There is no internal RAM in ARMADA100, using DRAM
28 * TBD: dcache to be used for this
30 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
32 /* Network configuration */
34 #define CONFIG_ARMADA100_FEC
37 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
38 #endif /* CONFIG_CMD_NET */
41 #define CONFIG_MARVELL_GPIO
43 /* PHY configuration */
44 #define CONFIG_RESET_PHY_R
45 /* 88E3015 register definition */
46 #define PHY_LED_PAR_SEL_REG 22
47 #define PHY_LED_MAN_REG 25
48 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
49 /* GPIO Configuration for PHY */
50 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
55 * mv-common.h should be defined after CMD configs since it used them
56 * to enable certain macros
58 #include "mv-common.h"
60 #ifdef CONFIG_SYS_NS16550_COM1
61 #undef CONFIG_SYS_NS16550_COM1
62 #endif /* CONFIG_SYS_NS16550_COM1 */
64 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
67 * Environment variables configurations
71 #define CONFIG_USB_EHCI_ARMADA100
72 #define CONFIG_EHCI_IS_TDI
73 #endif /* CONFIG_CMD_USB */
75 #endif /* __CONFIG_GPLUGD_H */