include/configs/ge_bx50v3.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Timesys Corporation
   4  * Copyright (C) 2015 General Electric Company
   5  * Copyright (C) 2014 Advantech
   6  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   7  *
   8  * Configuration settings for the GE MX6Q Bx50v3 boards.
   9  */
  10
  11 #ifndef __GE_BX50V3_CONFIG_H
  12 #define __GE_BX50V3_CONFIG_H
  13
  14 #include <asm/arch/imx-regs.h>
  15 #include <asm/mach-imx/gpio.h>
  16
  17 #define CONFIG_BOARD_NAME       "General Electric Bx50v3"
  18
  19 #include "mx6_common.h"
  20 #include <linux/sizes.h>
  21
  22 #define CONFIG_CMDLINE_TAG
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_REVISION_TAG
  26 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  27
  28 /* SATA Configs */
  29 #ifdef CONFIG_CMD_SATA
  30 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  31 #define CONFIG_DWC_AHSATA_PORT_ID       0
  32 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  33 #define CONFIG_LBA48
  34 #endif
  35
  36 /* USB Configs */
  37 #ifdef CONFIG_USB
  38 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  39 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  40 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  41 #define CONFIG_MXC_USB_FLAGS    0
  42
  43 #define CONFIG_USBD_HS
  44 #define CONFIG_USB_GADGET_MASS_STORAGE
  45 #endif
  46
  47 /* Serial Flash */
  48
  49 #define CONFIG_LOADADDR 0x12000000
  50
  51 #ifdef CONFIG_CMD_NFS
  52 #define NETWORKBOOT \
  53         "setnetworkboot=" \
  54                 "setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
  55                 "setenv gatewayip 172.16.2.20; setenv nfsserver 172.16.2.20; " \
  56                 "setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
  57                 "setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
  58                 "setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
  59                 "setenv bootargs $bootargs cma=128M bootcause=${bootcause} ${videoargs} " \
  60                 "setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
  61                 "setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
  62         "networkboot=" \
  63                 "run setnetworkboot; " \
  64                 "nfs ${loadaddr} /srv/nfs/fitImage; " \
  65                 "bootm ${loadaddr}\0" \
  66
  67 #define CONFIG_NETWORKBOOTCOMMAND \
  68         "run networkboot; " \
  69
  70 #else
  71 #define NETWORKBOOT \
  72
  73 #endif
  74
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         NETWORKBOOT \
  77         "image=/boot/fitImage\0" \
  78         "dev=mmc\0" \
  79         "devnum=2\0" \
  80         "rootdev=mmcblk0p\0" \
  81         "quiet=quiet loglevel=0\0" \
  82         "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
  83                 "ro rootwait cma=128M " \
  84                 "bootcause=${bootcause} " \
  85                 "${quiet} " \
  86                 "${videoargs}" "\0" \
  87         "doquiet=" \
  88                 "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
  89                         "then setenv quiet; fi\0" \
  90         "hasfirstboot=" \
  91                 "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
  92         "swappartitions=" \
  93                 "setexpr partnum 3 - ${partnum}\0" \
  94         "failbootcmd=" \
  95                 "cls; " \
  96                 "setcurs 5 4; " \
  97                 "lcdputs \"Monitor failed to start. " \
  98                 "Try again, or contact GE Service for support.\"; " \
  99                 "bootcount reset; \0" \
 100         "altbootcmd=" \
 101                 "run doquiet; " \
 102                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 103                 "run hasfirstboot || setenv partnum 0; " \
 104                 "if test ${partnum} != 0; then " \
 105                         "run swappartitions loadimage doboot; " \
 106                 "fi; " \
 107                 "run failbootcmd\0" \
 108         "loadimage=" \
 109                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 110         "doboot=" \
 111                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 112                 "run setargs; " \
 113                 "bootm ${loadaddr}\0" \
 114         "tryboot=" \
 115                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 116                 "run loadimage || run swappartitions && run loadimage || " \
 117                         "setenv partnum 0 && echo MISSING IMAGE;" \
 118                 "run doboot; " \
 119                 "run failbootcmd\0" \
 120
 121 #define CONFIG_MMCBOOTCOMMAND \
 122         "run doquiet; " \
 123         "run tryboot; " \
 124
 125 #ifdef CONFIG_CMD_NFS
 126 #define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
 127 #else
 128 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 129 #endif
 130
 131
 132 /* Miscellaneous configurable options */
 133
 134 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 135
 136 /* Physical Memory Map */
 137 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 138
 139 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)     /* 256M */
 140
 141 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 142 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 143 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 144
 145 #define CONFIG_SYS_INIT_SP_OFFSET \
 146         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 147 #define CONFIG_SYS_INIT_SP_ADDR \
 148         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 149
 150 /* environment organization */
 151
 152 #define CONFIG_SYS_FSL_USDHC_NUM        3
 153
 154 /* Framebuffer */
 155 #define CONFIG_HIDE_LOGO_VERSION
 156 #define CONFIG_IMX_HDMI
 157 #define CONFIG_IMX_VIDEO_SKIP
 158
 159 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 160
 161 #define CONFIG_PCI_SCAN_SHOW
 162 #define CONFIG_PCIE_IMX
 163 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 164 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 165
 166 #endif  /* __GE_BX50V3_CONFIG_H */