include/configs/ge_bx50v3.h

   1 /*
   2  * Copyright (C) 2015 Timesys Corporation
   3  * Copyright (C) 2015 General Electric Company
   4  * Copyright (C) 2014 Advantech
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the GE MX6Q Bx50v3 boards.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __GE_BX50V3_CONFIG_H
  13 #define __GE_BX50V3_CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <asm/imx-common/gpio.h>
  17
  18 #define BX50V3_BOOTARGS_EXTRA
  19 #if defined(CONFIG_TARGET_GE_B450V3)
  20 #define CONFIG_BOARD_NAME       "General Electric B450v3"
  21 #elif defined(CONFIG_TARGET_GE_B650V3)
  22 #define CONFIG_BOARD_NAME       "General Electric B650v3"
  23 #elif defined(CONFIG_TARGET_GE_B850V3)
  24 #define CONFIG_BOARD_NAME       "General Electric B850v3"
  25 #undef BX50V3_BOOTARGS_EXTRA
  26 #define BX50V3_BOOTARGS_EXTRA   "video=DP-1:1024x768@60 " \
  27                                 "video=HDMI-A-1:1024x768@60 "
  28 #else
  29 #define CONFIG_BOARD_NAME       "General Electric BA16 Generic"
  30 #endif
  31
  32 #define CONFIG_MXC_UART_BASE    UART3_BASE
  33 #define CONFIG_CONSOLE_DEV      "ttymxc2"
  34
  35 #define CONFIG_SUPPORT_EMMC_BOOT
  36
  37
  38 #include "mx6_common.h"
  39 #include <linux/sizes.h>
  40
  41 #define CONFIG_CMDLINE_TAG
  42 #define CONFIG_SETUP_MEMORY_TAGS
  43 #define CONFIG_INITRD_TAG
  44 #define CONFIG_REVISION_TAG
  45 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  46
  47 #define CONFIG_BOARD_EARLY_INIT_F
  48 #define CONFIG_BOARD_LATE_INIT
  49
  50 #define CONFIG_MXC_GPIO
  51 #define CONFIG_MXC_UART
  52
  53 #define CONFIG_CMD_FUSE
  54 #define CONFIG_MXC_OCOTP
  55
  56 /* SATA Configs */
  57 #ifdef CONFIG_CMD_SATA
  58 #define CONFIG_DWC_AHSATA
  59 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  60 #define CONFIG_DWC_AHSATA_PORT_ID       0
  61 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  62 #define CONFIG_LBA48
  63 #define CONFIG_LIBATA
  64 #endif
  65
  66 /* MMC Configs */
  67 #define CONFIG_FSL_ESDHC
  68 #define CONFIG_FSL_USDHC
  69 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  70 #define CONFIG_MMC
  71 #define CONFIG_GENERIC_MMC
  72 #define CONFIG_BOUNCE_BUFFER
  73 #define CONFIG_DOS_PARTITION
  74
  75 /* USB Configs */
  76 #ifdef CONFIG_USB
  77 #define CONFIG_USB_EHCI
  78 #define CONFIG_USB_EHCI_MX6
  79 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  80 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  81 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  82 #define CONFIG_MXC_USB_FLAGS    0
  83 #define CONFIG_USB_KEYBOARD
  84 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  85
  86 #define CONFIG_CI_UDC
  87 #define CONFIG_USBD_HS
  88 #define CONFIG_USB_GADGET_DUALSPEED
  89 #define CONFIG_USB_GADGET
  90 #define CONFIG_USB_GADGET_DOWNLOAD
  91 #define CONFIG_USB_GADGET_MASS_STORAGE
  92 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  93 #define CONFIG_USB_GADGET_VBUS_DRAW 2
  94 #define CONFIG_G_DNL_VENDOR_NUM   0x0525
  95 #define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
  96 #define CONFIG_G_DNL_MANUFACTURER "Advantech"
  97 #endif
  98
  99 /* Networking Configs */
 100 #ifdef CONFIG_NET
 101 #define CONFIG_FEC_MXC
 102 #define CONFIG_MII
 103 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 104 #define CONFIG_FEC_XCV_TYPE             RGMII
 105 #define CONFIG_ETHPRIME         "FEC"
 106 #define CONFIG_FEC_MXC_PHYADDR          4
 107 #define CONFIG_PHYLIB
 108 #define CONFIG_PHY_ATHEROS
 109 #endif
 110
 111 /* Serial Flash */
 112 #ifdef CONFIG_CMD_SF
 113 #define CONFIG_MXC_SPI
 114 #define CONFIG_SF_DEFAULT_BUS           0
 115 #define CONFIG_SF_DEFAULT_CS            0
 116 #define CONFIG_SF_DEFAULT_SPEED 20000000
 117 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 118 #endif
 119
 120 /* allow to overwrite serial and ethaddr */
 121 #define CONFIG_ENV_OVERWRITE
 122 #define CONFIG_CONS_INDEX       1
 123 #define CONFIG_BAUDRATE 115200
 124
 125 /* Command definition */
 126 #define CONFIG_CMD_BMODE
 127
 128 #define CONFIG_LOADADDR 0x12000000
 129 #define CONFIG_SYS_TEXT_BASE    0x17800000
 130
 131 #define CONFIG_EXTRA_ENV_SETTINGS \
 132         "script=boot.scr\0" \
 133         "image=/boot/uImage\0" \
 134         "uboot=u-boot.imx\0" \
 135         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 136         "fdt_addr=0x18000000\0" \
 137         "boot_fdt=yes\0" \
 138         "ip_dyn=yes\0" \
 139         "console=" CONFIG_CONSOLE_DEV "\0" \
 140         "fdt_high=0xffffffff\0"   \
 141         "initrd_high=0xffffffff\0" \
 142         "sddev=0\0" \
 143         "emmcdev=1\0" \
 144         "partnum=1\0" \
 145         "update_sd_firmware=" \
 146                 "if test ${ip_dyn} = yes; then " \
 147                         "setenv get_cmd dhcp; " \
 148                 "else " \
 149                         "setenv get_cmd tftp; " \
 150                 "fi; " \
 151                 "if mmc dev ${mmcdev}; then "   \
 152                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 153                                 "setexpr fw_sz ${filesize} / 0x200; " \
 154                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 155                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 156                         "fi; "  \
 157                 "fi\0" \
 158         "update_sf_uboot=" \
 159                 "if tftp $loadaddr $uboot; then " \
 160                         "sf probe; " \
 161                         "sf erase 0 0xC0000; " \
 162                         "sf write $loadaddr 0x400 $filesize; " \
 163                         "echo 'U-Boot upgraded. Please reset'; " \
 164                 "fi\0" \
 165         "setargs=setenv bootargs console=${console},${baudrate} " \
 166                 "root=/dev/${rootdev} rw rootwait cma=128M " \
 167                 BX50V3_BOOTARGS_EXTRA "\0" \
 168         "loadbootscript=" \
 169                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 170         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 171                 " source\0" \
 172         "loadimage=" \
 173                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 174         "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 175         "tryboot=" \
 176                 "if run loadbootscript; then " \
 177                         "run bootscript; " \
 178                 "else " \
 179                         "if run loadimage; then " \
 180                                 "run doboot; " \
 181                         "fi; " \
 182                 "fi;\0" \
 183         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 184                 "run setargs; " \
 185                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 186                         "if run loadfdt; then " \
 187                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 188                         "else " \
 189                                 "if test ${boot_fdt} = try; then " \
 190                                         "bootm; " \
 191                                 "else " \
 192                                         "echo WARN: Cannot load the DT; " \
 193                                 "fi; " \
 194                         "fi; " \
 195                 "else " \
 196                         "bootm; " \
 197                 "fi;\0" \
 198         "netargs=setenv bootargs console=${console},${baudrate} " \
 199                 "root=/dev/nfs " \
 200                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 201         "netboot=echo Booting from net ...; " \
 202                 "run netargs; " \
 203                 "if test ${ip_dyn} = yes; then " \
 204                         "setenv get_cmd dhcp; " \
 205                 "else " \
 206                         "setenv get_cmd tftp; " \
 207                 "fi; " \
 208                 "${get_cmd} ${image}; " \
 209                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 210                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 211                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 212                         "else " \
 213                                 "if test ${boot_fdt} = try; then " \
 214                                         "bootm; " \
 215                                 "else " \
 216                                         "echo WARN: Cannot load the DT; " \
 217                                 "fi; " \
 218                         "fi; " \
 219                 "else " \
 220                         "bootm; " \
 221                 "fi;\0" \
 222
 223 #define CONFIG_MMCBOOTCOMMAND \
 224         "setenv dev mmc; " \
 225         "setenv rootdev mmcblk0p${partnum}; " \
 226         \
 227         "setenv devnum ${sddev}; " \
 228         "if mmc dev ${devnum}; then " \
 229                 "run tryboot; " \
 230                 "setenv rootdev mmcblk1p${partnum}; " \
 231         "fi; " \
 232         \
 233         "setenv devnum ${emmcdev}; " \
 234         "if mmc dev ${devnum}; then " \
 235                 "run tryboot; " \
 236         "fi; " \
 237
 238 #define CONFIG_USBBOOTCOMMAND \
 239         "usb start; " \
 240         "setenv dev usb; " \
 241         "setenv devnum 0; " \
 242         "setenv rootdev sda${partnum}; " \
 243         "run tryboot; " \
 244         \
 245         CONFIG_MMCBOOTCOMMAND \
 246         "bmode usb; " \
 247
 248 #ifdef CONFIG_CMD_USB
 249 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 250 #else
 251 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 252 #endif
 253
 254 #define CONFIG_ARP_TIMEOUT     200UL
 255
 256 /* Miscellaneous configurable options */
 257 #define CONFIG_SYS_LONGHELP
 258 #define CONFIG_AUTO_COMPLETE
 259
 260 /* Print Buffer Size */
 261 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 262 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 263
 264 #define CONFIG_SYS_MEMTEST_START       0x10000000
 265 #define CONFIG_SYS_MEMTEST_END         0x10010000
 266 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 267
 268 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 269
 270 #define CONFIG_CMDLINE_EDITING
 271 #define CONFIG_STACKSIZE               (128 * 1024)
 272
 273 /* Physical Memory Map */
 274 #define CONFIG_NR_DRAM_BANKS           1
 275 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 276
 277 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 278 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 279 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 280
 281 #define CONFIG_SYS_INIT_SP_OFFSET \
 282         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 283 #define CONFIG_SYS_INIT_SP_ADDR \
 284         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 285
 286 /* FLASH and environment organization */
 287 #define CONFIG_SYS_NO_FLASH
 288
 289 #define CONFIG_ENV_IS_IN_SPI_FLASH
 290 #define CONFIG_ENV_SIZE         (8 * 1024)
 291 #define CONFIG_ENV_OFFSET               (768 * 1024)
 292 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 293 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 294 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 295 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 296 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 297
 298 #ifndef CONFIG_SYS_DCACHE_OFF
 299 #endif
 300
 301 #define CONFIG_SYS_FSL_USDHC_NUM        3
 302
 303 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 304 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 305
 306 /* Framebuffer */
 307 #ifdef CONFIG_VIDEO
 308 #define CONFIG_VIDEO_IPUV3
 309 #define CONFIG_CFB_CONSOLE
 310 #define CONFIG_VGA_AS_SINGLE_DEVICE
 311 #define CONFIG_VIDEO_BMP_RLE8
 312 #define CONFIG_SPLASH_SCREEN
 313 #define CONFIG_SPLASH_SCREEN_ALIGN
 314 #define CONFIG_BMP_16BPP
 315 #define CONFIG_VIDEO_LOGO
 316 #define CONFIG_VIDEO_BMP_LOGO
 317 #define CONFIG_IPUV3_CLK 260000000
 318 #define CONFIG_IMX_HDMI
 319 #define CONFIG_IMX_VIDEO_SKIP
 320 #endif
 321
 322 #define CONFIG_PWM_IMX
 323 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 324
 325 #undef CONFIG_CMD_PCI
 326 #ifdef CONFIG_CMD_PCI
 327 #define CONFIG_PCI
 328 #define CONFIG_PCI_PNP
 329 #define CONFIG_PCI_SCAN_SHOW
 330 #define CONFIG_PCIE_IMX
 331 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 332 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 333 #endif
 334
 335 /* I2C Configs */
 336 #define CONFIG_SYS_I2C
 337 #define CONFIG_SYS_I2C_MXC
 338 #define CONFIG_SYS_I2C_SPEED              100000
 339 #define CONFIG_SYS_I2C_MXC_I2C1
 340 #define CONFIG_SYS_I2C_MXC_I2C2
 341 #define CONFIG_SYS_I2C_MXC_I2C3
 342
 343 #endif  /* __GE_BX50V3_CONFIG_H */