include/configs/ge_bx50v3.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Timesys Corporation
   4  * Copyright (C) 2015 General Electric Company
   5  * Copyright (C) 2014 Advantech
   6  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   7  *
   8  * Configuration settings for the GE MX6Q Bx50v3 boards.
   9  */
  10
  11 #ifndef __GE_BX50V3_CONFIG_H
  12 #define __GE_BX50V3_CONFIG_H
  13
  14 #include <asm/arch/imx-regs.h>
  15 #include <asm/mach-imx/gpio.h>
  16
  17 #define CONFIG_BOARD_NAME       "General Electric Bx50v3"
  18
  19 #define CONFIG_MXC_UART_BASE    UART3_BASE
  20 #define CONSOLE_DEV     "ttymxc2"
  21
  22 #define CONFIG_SUPPORT_EMMC_BOOT
  23
  24
  25 #include "mx6_common.h"
  26 #include <linux/sizes.h>
  27
  28 #define CONFIG_CMDLINE_TAG
  29 #define CONFIG_SETUP_MEMORY_TAGS
  30 #define CONFIG_INITRD_TAG
  31 #define CONFIG_REVISION_TAG
  32 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  33
  34 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000
  35
  36 #define CONFIG_MXC_UART
  37
  38 #define CONFIG_MXC_OCOTP
  39
  40 /* SATA Configs */
  41 #ifdef CONFIG_CMD_SATA
  42 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  43 #define CONFIG_DWC_AHSATA_PORT_ID       0
  44 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  45 #define CONFIG_LBA48
  46 #endif
  47
  48 /* MMC Configs */
  49 #define CONFIG_FSL_USDHC
  50 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  51
  52 /* USB Configs */
  53 #ifdef CONFIG_USB
  54 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  55 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  56 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  57 #define CONFIG_MXC_USB_FLAGS    0
  58
  59 #define CONFIG_USBD_HS
  60 #define CONFIG_USB_GADGET_MASS_STORAGE
  61 #endif
  62
  63 /* Networking Configs */
  64 #ifdef CONFIG_NET
  65 #define CONFIG_FEC_MXC
  66 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  67 #define CONFIG_FEC_XCV_TYPE             RGMII
  68 #define CONFIG_ETHPRIME         "FEC"
  69 #define CONFIG_FEC_MXC_PHYADDR          4
  70 #define CONFIG_PHY_ATHEROS
  71 #endif
  72
  73 /* Serial Flash */
  74 #ifdef CONFIG_CMD_SF
  75 #define CONFIG_SF_DEFAULT_BUS           0
  76 #define CONFIG_SF_DEFAULT_CS            0
  77 #define CONFIG_SF_DEFAULT_SPEED 20000000
  78 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  79 #endif
  80
  81 /* allow to overwrite serial and ethaddr */
  82 #define CONFIG_ENV_OVERWRITE
  83
  84 #define CONFIG_LOADADDR 0x12000000
  85
  86 #define CONFIG_EXTRA_ENV_SETTINGS \
  87         "bootcause=POR\0" \
  88         "image=/boot/fitImage\0" \
  89         "fdt_high=0xffffffff\0" \
  90         "dev=mmc\0" \
  91         "devnum=1\0" \
  92         "rootdev=mmcblk0p\0" \
  93         "quiet=quiet loglevel=0\0" \
  94         "console=" CONSOLE_DEV "\0" \
  95         "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
  96                 "ro rootwait cma=128M " \
  97                 "bootcause=${bootcause} " \
  98                 "${quiet} console=${console} ${rtc_status} " \
  99                 "${videoargs}" "\0" \
 100         "doquiet=" \
 101                 "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
 102                         "then setenv quiet; fi\0" \
 103         "hasfirstboot=" \
 104                 "ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
 105                 "/boot/bootcause/firstboot\0" \
 106         "swappartitions=" \
 107                 "setexpr partnum 3 - ${partnum}\0" \
 108         "failbootcmd=" \
 109                 "bx50_backlight_enable; " \
 110                 "msg=\"Monitor failed to start.  Try again, or contact GE Service for support.\"; " \
 111                 "echo $msg; " \
 112                 "setenv stdout vga; " \
 113                 "echo \"\n\n\n\n    \" $msg; " \
 114                 "setenv stdout serial; " \
 115                 "mw.b 0x7000A000 0xbc; " \
 116                 "mw.b 0x7000A001 0x00; " \
 117                 "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
 118         "altbootcmd=" \
 119                 "run doquiet; " \
 120                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 121                 "run hasfirstboot || setenv partnum 0; " \
 122                 "if test ${partnum} != 0; then " \
 123                         "setenv bootcause REVERT; " \
 124                         "run swappartitions loadimage doboot; " \
 125                 "fi; " \
 126                 "run failbootcmd\0" \
 127         "loadimage=" \
 128                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 129         "doboot=" \
 130                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 131                 "run setargs; " \
 132                 "bootm ${loadaddr}#conf@${confidx}\0" \
 133         "tryboot=" \
 134                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 135                 "run loadimage || run swappartitions && run loadimage || " \
 136                 "setenv partnum 0 && echo MISSING IMAGE;" \
 137                 "run doboot; " \
 138                 "run failbootcmd\0" \
 139
 140 #define CONFIG_MMCBOOTCOMMAND \
 141         "if mmc dev ${devnum}; then " \
 142                 "run doquiet; " \
 143                 "run tryboot; " \
 144         "fi; " \
 145
 146 #define CONFIG_USBBOOTCOMMAND \
 147         "echo Unsupported; " \
 148
 149 #ifdef CONFIG_CMD_USB
 150 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 151 #else
 152 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 153 #endif
 154
 155 #define CONFIG_ARP_TIMEOUT     200UL
 156
 157 /* Miscellaneous configurable options */
 158
 159 #define CONFIG_SYS_MEMTEST_START       0x10000000
 160 #define CONFIG_SYS_MEMTEST_END         0x10010000
 161 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 162
 163 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 164
 165 /* Physical Memory Map */
 166 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 167
 168 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 169 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 170 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 171
 172 #define CONFIG_SYS_INIT_SP_OFFSET \
 173         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 174 #define CONFIG_SYS_INIT_SP_ADDR \
 175         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 176
 177 /* environment organization */
 178 #define CONFIG_ENV_SIZE         (8 * 1024)
 179 #define CONFIG_ENV_OFFSET               (768 * 1024)
 180 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 181 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 182 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 183 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 184 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 185
 186 #define CONFIG_SYS_FSL_USDHC_NUM        3
 187
 188 /* Framebuffer */
 189 #define CONFIG_VIDEO
 190 #ifdef CONFIG_VIDEO
 191 #define CONFIG_VIDEO_IPUV3
 192 #define CONFIG_CFB_CONSOLE
 193 #define CONFIG_VGA_AS_SINGLE_DEVICE
 194 #define CONFIG_SYS_CONSOLE_FG_COL 0xFF
 195 #define CONFIG_SYS_CONSOLE_BG_COL 0x00
 196 #define CONFIG_HIDE_LOGO_VERSION
 197 #define CONFIG_IMX_HDMI
 198 #define CONFIG_IMX_VIDEO_SKIP
 199 #define CONFIG_CMD_BMP
 200 #endif
 201
 202 #define CONFIG_PWM_IMX
 203 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 204
 205 #define CONFIG_PCI
 206 #define CONFIG_PCI_PNP
 207 #define CONFIG_PCI_SCAN_SHOW
 208 #define CONFIG_PCIE_IMX
 209 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 210 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 211
 212 #define CONFIG_RTC_RX8010SJ
 213 #define CONFIG_SYS_RTC_BUS_NUM 2
 214 #define CONFIG_SYS_I2C_RTC_ADDR 0x32
 215
 216 /* I2C Configs */
 217 #define CONFIG_SYS_I2C
 218 #define CONFIG_SYS_I2C_MXC
 219 #define CONFIG_SYS_I2C_SPEED              100000
 220 #define CONFIG_SYS_I2C_MXC_I2C1
 221 #define CONFIG_SYS_I2C_MXC_I2C2
 222 #define CONFIG_SYS_I2C_MXC_I2C3
 223
 224 #define CONFIG_SYS_NUM_I2C_BUSES        11
 225 #define CONFIG_SYS_I2C_MAX_HOPS         1
 226 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
 227                                         {1, {I2C_NULL_HOP} }, \
 228                                         {2, {I2C_NULL_HOP} }, \
 229                                         {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
 230                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 231                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 232                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
 233                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
 234                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
 235                                         {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
 236                                         {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
 237                                 }
 238
 239 #define CONFIG_BCH
 240
 241 #endif  /* __GE_BX50V3_CONFIG_H */