include/configs/ge_bx50v3.h

   1 /*
   2  * Copyright (C) 2015 Timesys Corporation
   3  * Copyright (C) 2015 General Electric Company
   4  * Copyright (C) 2014 Advantech
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the GE MX6Q Bx50v3 boards.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __GE_BX50V3_CONFIG_H
  13 #define __GE_BX50V3_CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <asm/mach-imx/gpio.h>
  17
  18 #define BX50V3_BOOTARGS_EXTRA
  19 #if defined(CONFIG_TARGET_GE_B450V3)
  20 #define CONFIG_BOARD_NAME       "General Electric B450v3"
  21 #elif defined(CONFIG_TARGET_GE_B650V3)
  22 #define CONFIG_BOARD_NAME       "General Electric B650v3"
  23 #elif defined(CONFIG_TARGET_GE_B850V3)
  24 #define CONFIG_BOARD_NAME       "General Electric B850v3"
  25 #undef BX50V3_BOOTARGS_EXTRA
  26 #define BX50V3_BOOTARGS_EXTRA   "video=DP-1:1024x768@60 " \
  27                                 "video=HDMI-A-1:1024x768@60 "
  28 #else
  29 #define CONFIG_BOARD_NAME       "General Electric BA16 Generic"
  30 #endif
  31
  32 #define CONFIG_MXC_UART_BASE    UART3_BASE
  33 #define CONSOLE_DEV     "ttymxc2"
  34
  35 #define CONFIG_SUPPORT_EMMC_BOOT
  36
  37
  38 #include "mx6_common.h"
  39 #include <linux/sizes.h>
  40
  41 #define CONFIG_CMDLINE_TAG
  42 #define CONFIG_SETUP_MEMORY_TAGS
  43 #define CONFIG_INITRD_TAG
  44 #define CONFIG_REVISION_TAG
  45 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  46
  47 #define CONFIG_HW_WATCHDOG
  48 #define CONFIG_IMX_WATCHDOG
  49 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000
  50
  51 #define CONFIG_LAST_STAGE_INIT
  52
  53 #define CONFIG_MXC_UART
  54
  55 #define CONFIG_MXC_OCOTP
  56
  57 /* SATA Configs */
  58 #ifdef CONFIG_CMD_SATA
  59 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  60 #define CONFIG_DWC_AHSATA_PORT_ID       0
  61 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  62 #define CONFIG_LBA48
  63 #endif
  64
  65 /* MMC Configs */
  66 #define CONFIG_FSL_ESDHC
  67 #define CONFIG_FSL_USDHC
  68 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  69 #define CONFIG_BOUNCE_BUFFER
  70
  71 /* USB Configs */
  72 #ifdef CONFIG_USB
  73 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  74 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  75 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  76 #define CONFIG_MXC_USB_FLAGS    0
  77
  78 #define CONFIG_USBD_HS
  79 #define CONFIG_USB_GADGET_MASS_STORAGE
  80 #endif
  81
  82 /* Networking Configs */
  83 #ifdef CONFIG_NET
  84 #define CONFIG_FEC_MXC
  85 #define CONFIG_MII
  86 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  87 #define CONFIG_FEC_XCV_TYPE             RGMII
  88 #define CONFIG_ETHPRIME         "FEC"
  89 #define CONFIG_FEC_MXC_PHYADDR          4
  90 #define CONFIG_PHY_ATHEROS
  91 #endif
  92
  93 /* Serial Flash */
  94 #ifdef CONFIG_CMD_SF
  95 #define CONFIG_MXC_SPI
  96 #define CONFIG_SF_DEFAULT_BUS           0
  97 #define CONFIG_SF_DEFAULT_CS            0
  98 #define CONFIG_SF_DEFAULT_SPEED 20000000
  99 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 100 #endif
 101
 102 /* allow to overwrite serial and ethaddr */
 103 #define CONFIG_ENV_OVERWRITE
 104 #define CONFIG_CONS_INDEX       1
 105
 106 #define CONFIG_LOADADDR 0x12000000
 107 #define CONFIG_SYS_TEXT_BASE    0x17800000
 108
 109 #define CONFIG_EXTRA_ENV_SETTINGS \
 110         "bootcause=POR\0" \
 111         "bootlimit=10\0" \
 112         "image=/boot/fitImage\0" \
 113         "fdt_high=0xffffffff\0" \
 114         "dev=mmc\0" \
 115         "devnum=1\0" \
 116         "rootdev=mmcblk0p\0" \
 117         "quiet=quiet loglevel=0\0" \
 118         "console=" CONSOLE_DEV "\0" \
 119         "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
 120                 "ro rootwait cma=128M " \
 121                 "bootcause=${bootcause} " \
 122                 "${quiet} console=${console} ${rtc_status} " \
 123                 BX50V3_BOOTARGS_EXTRA "\0" \
 124         "doquiet=" \
 125                 "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
 126                         "then setenv quiet; fi\0" \
 127         "hasfirstboot=" \
 128                 "ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
 129                 "/boot/bootcause/firstboot\0" \
 130         "swappartitions=" \
 131                 "setexpr partnum 3 - ${partnum}\0" \
 132         "failbootcmd=" \
 133                 "msg=\"Monitor failed to start.  Try again, or contact GE Service for support.\"; " \
 134                 "echo $msg; " \
 135                 "setenv stdout vga; " \
 136                 "echo \"\n\n\n\n    \" $msg; " \
 137                 "setenv stdout serial; " \
 138                 "mw.b 0x7000A000 0xbc; " \
 139                 "mw.b 0x7000A001 0x00; " \
 140                 "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
 141         "altbootcmd=" \
 142                 "run doquiet; " \
 143                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 144                 "run hasfirstboot || setenv partnum 0; " \
 145                 "if test ${partnum} != 0; then " \
 146                         "setenv bootcause REVERT; " \
 147                         "run swappartitions loadimage doboot; " \
 148                 "fi; " \
 149                 "run failbootcmd\0" \
 150         "loadimage=" \
 151                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 152         "doboot=" \
 153                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 154                 "run setargs; " \
 155                 "bootm ${loadaddr}#conf@${confidx}\0" \
 156         "tryboot=" \
 157                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 158                 "run loadimage || run swappartitions && run loadimage || " \
 159                 "setenv partnum 0 && echo MISSING IMAGE;" \
 160                 "run doboot; " \
 161                 "run failbootcmd\0" \
 162
 163 #define CONFIG_MMCBOOTCOMMAND \
 164         "if mmc dev ${devnum}; then " \
 165                 "run doquiet; " \
 166                 "run tryboot; " \
 167         "fi; " \
 168
 169 #define CONFIG_USBBOOTCOMMAND \
 170         "echo Unsupported; " \
 171
 172 #ifdef CONFIG_CMD_USB
 173 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 174 #else
 175 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 176 #endif
 177
 178 #define CONFIG_ARP_TIMEOUT     200UL
 179
 180 /* Miscellaneous configurable options */
 181 #define CONFIG_SYS_LONGHELP
 182 #define CONFIG_AUTO_COMPLETE
 183
 184 #define CONFIG_SYS_MEMTEST_START       0x10000000
 185 #define CONFIG_SYS_MEMTEST_END         0x10010000
 186 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 187
 188 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 189
 190 #define CONFIG_CMDLINE_EDITING
 191
 192 /* Physical Memory Map */
 193 #define CONFIG_NR_DRAM_BANKS           1
 194 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 195
 196 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 197 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 198 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 199
 200 #define CONFIG_SYS_INIT_SP_OFFSET \
 201         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 202 #define CONFIG_SYS_INIT_SP_ADDR \
 203         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 204
 205 /* environment organization */
 206 #define CONFIG_ENV_SIZE         (8 * 1024)
 207 #define CONFIG_ENV_OFFSET               (768 * 1024)
 208 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 209 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 210 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 211 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 212 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 213
 214 #ifndef CONFIG_SYS_DCACHE_OFF
 215 #endif
 216
 217 #define CONFIG_SYS_FSL_USDHC_NUM        3
 218
 219 /* Framebuffer */
 220 #define CONFIG_VIDEO
 221 #ifdef CONFIG_VIDEO
 222 #define CONFIG_VIDEO_IPUV3
 223 #define CONFIG_CFB_CONSOLE
 224 #define CONFIG_VGA_AS_SINGLE_DEVICE
 225 #define CONFIG_SYS_CONSOLE_FG_COL 0xFF
 226 #define CONFIG_SYS_CONSOLE_BG_COL 0x00
 227 #define CONFIG_HIDE_LOGO_VERSION
 228 #define CONFIG_IMX_HDMI
 229 #define CONFIG_IMX_VIDEO_SKIP
 230 #define CONFIG_CMD_BMP
 231 #endif
 232
 233 #define CONFIG_PWM_IMX
 234 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 235
 236 #define CONFIG_PCI
 237 #define CONFIG_PCI_PNP
 238 #define CONFIG_PCI_SCAN_SHOW
 239 #define CONFIG_PCIE_IMX
 240 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 241 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 242
 243 #define CONFIG_RTC_RX8010SJ
 244 #define CONFIG_SYS_RTC_BUS_NUM 2
 245 #define CONFIG_SYS_I2C_RTC_ADDR 0x32
 246
 247 /* I2C Configs */
 248 #define CONFIG_SYS_I2C
 249 #define CONFIG_SYS_I2C_MXC
 250 #define CONFIG_SYS_I2C_SPEED              100000
 251 #define CONFIG_SYS_I2C_MXC_I2C1
 252 #define CONFIG_SYS_I2C_MXC_I2C2
 253 #define CONFIG_SYS_I2C_MXC_I2C3
 254
 255 #define CONFIG_SYS_NUM_I2C_BUSES        11
 256 #define CONFIG_SYS_I2C_MAX_HOPS         1
 257 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
 258                                         {1, {I2C_NULL_HOP} }, \
 259                                         {2, {I2C_NULL_HOP} }, \
 260                                         {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
 261                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 262                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 263                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
 264                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
 265                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
 266                                         {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
 267                                         {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
 268                                 }
 269
 270 #define CONFIG_BCH
 271
 272 #define CONFIG_BOOTCOUNT_LIMIT
 273 #define CONFIG_BOOTCOUNT_EXT
 274 #define CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE      "mmc"
 275 #define CONFIG_SYS_BOOTCOUNT_EXT_DEVPART        "1:5"
 276 #define CONFIG_SYS_BOOTCOUNT_EXT_NAME           "/boot/failures"
 277 #define CONFIG_SYS_BOOTCOUNT_ADDR               0x7000A000
 278
 279 #endif  /* __GE_BX50V3_CONFIG_H */