Merge tag 'u-boot-amlogic-20200708' of https://gitlab.denx.de/u-boot/custodians/u...
[platform/kernel/u-boot.git] / include / configs / ge_bx50v3.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2015 Timesys Corporation
4  * Copyright (C) 2015 General Electric Company
5  * Copyright (C) 2014 Advantech
6  * Copyright (C) 2012 Freescale Semiconductor, Inc.
7  *
8  * Configuration settings for the GE MX6Q Bx50v3 boards.
9  */
10
11 #ifndef __GE_BX50V3_CONFIG_H
12 #define __GE_BX50V3_CONFIG_H
13
14 #include <asm/arch/imx-regs.h>
15 #include <asm/mach-imx/gpio.h>
16
17 #define CONFIG_BOARD_NAME       "General Electric Bx50v3"
18
19 #include "mx6_common.h"
20 #include <linux/sizes.h>
21
22 #define CONFIG_CMDLINE_TAG
23 #define CONFIG_SETUP_MEMORY_TAGS
24 #define CONFIG_INITRD_TAG
25 #define CONFIG_REVISION_TAG
26 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
27
28 /* SATA Configs */
29 #ifdef CONFIG_CMD_SATA
30 #define CONFIG_SYS_SATA_MAX_DEVICE      1
31 #define CONFIG_DWC_AHSATA_PORT_ID       0
32 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
33 #define CONFIG_LBA48
34 #endif
35
36 /* USB Configs */
37 #ifdef CONFIG_USB
38 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
39 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
40 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
41 #define CONFIG_MXC_USB_FLAGS    0
42
43 #define CONFIG_USBD_HS
44 #define CONFIG_USB_GADGET_MASS_STORAGE
45 #endif
46
47 /* Serial Flash */
48
49 /* allow to overwrite serial and ethaddr */
50 #define CONFIG_ENV_OVERWRITE
51
52 #define CONFIG_LOADADDR 0x12000000
53
54 #ifdef CONFIG_NFS_CMD
55 #define NETWORKBOOT \
56         "setnetworkboot=" \
57                 "setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
58                 "setenv gatewayip 172.16.2.20; setenv nfsserver 172.16.2.20; " \
59                 "setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
60                 "setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
61                 "setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
62                 "setenv bootargs $bootargs cma=128M bootcause=POR ${videoargs} " \
63                 "setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
64                 "setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
65         "networkboot=" \
66                 "run setnetworkboot; " \
67                 "nfs ${loadaddr} /srv/nfs/fitImage; " \
68                 "bootm ${loadaddr}#conf@${confidx}\0" \
69
70 #define CONFIG_NETWORKBOOTCOMMAND \
71         "run networkboot; " \
72
73 #else
74 #define NETWORKBOOT \
75
76 #endif
77
78 #define CONFIG_EXTRA_ENV_SETTINGS \
79         NETWORKBOOT \
80         "bootcause=POR\0" \
81         "image=/boot/fitImage\0" \
82         "dev=mmc\0" \
83         "devnum=2\0" \
84         "rootdev=mmcblk0p\0" \
85         "quiet=quiet loglevel=0\0" \
86         "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
87                 "ro rootwait cma=128M " \
88                 "bootcause=${bootcause} " \
89                 "${quiet} " \
90                 "${videoargs}" "\0" \
91         "doquiet=" \
92                 "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
93                         "then setenv quiet; fi\0" \
94         "hasfirstboot=" \
95                 "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
96         "swappartitions=" \
97                 "setexpr partnum 3 - ${partnum}\0" \
98         "failbootcmd=" \
99                 "echo reached failbootcmd; " \
100                 "cls; " \
101                 "setcurs 5 4; " \
102                 "lcdputs \"Monitor failed to start. " \
103                 "Try again, or contact GE Service for support.\"; " \
104                 "bootcount reset; \0" \
105         "altbootcmd=" \
106                 "run doquiet; " \
107                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
108                 "run hasfirstboot || setenv partnum 0; " \
109                 "if test ${partnum} != 0; then " \
110                         "setenv bootcause REVERT; " \
111                         "run swappartitions loadimage doboot; " \
112                 "fi; " \
113                 "run failbootcmd\0" \
114         "loadimage=" \
115                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
116         "doboot=" \
117                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
118                 "run setargs; " \
119                 "bootm ${loadaddr}#conf@${confidx}\0" \
120         "tryboot=" \
121                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
122                 "run loadimage || run swappartitions && run loadimage || " \
123                 "setenv partnum 0 && echo MISSING IMAGE;" \
124                 "run doboot; " \
125                 "run failbootcmd\0" \
126
127 #define CONFIG_MMCBOOTCOMMAND \
128         "if mmc dev ${devnum}; then " \
129                 "run doquiet; " \
130                 "run tryboot; " \
131         "fi; " \
132
133 #define CONFIG_USBBOOTCOMMAND \
134         "echo Unsupported; " \
135
136 #ifdef CONFIG_NFS_CMD
137 #define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
138 #elif CONFIG_CMD_USB
139 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
140 #else
141 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
142 #endif
143
144
145 /* Miscellaneous configurable options */
146
147 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
148
149 /* Physical Memory Map */
150 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
151
152 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)     /* 256M */
153
154 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
155 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
156 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
157
158 #define CONFIG_SYS_INIT_SP_OFFSET \
159         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
160 #define CONFIG_SYS_INIT_SP_ADDR \
161         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
162
163 /* environment organization */
164
165 #define CONFIG_SYS_FSL_USDHC_NUM        3
166
167 /* Framebuffer */
168 #define CONFIG_HIDE_LOGO_VERSION
169 #define CONFIG_IMX_HDMI
170 #define CONFIG_IMX_VIDEO_SKIP
171
172 #define CONFIG_IMX6_PWM_PER_CLK 66000000
173
174 #define CONFIG_PCI_SCAN_SHOW
175 #define CONFIG_PCIE_IMX
176 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
177 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
178
179 #endif  /* __GE_BX50V3_CONFIG_H */