include/configs/ge_bx50v3.h

   1 /*
   2  * Copyright (C) 2015 Timesys Corporation
   3  * Copyright (C) 2015 General Electric Company
   4  * Copyright (C) 2014 Advantech
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the GE MX6Q Bx50v3 boards.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __GE_BX50V3_CONFIG_H
  13 #define __GE_BX50V3_CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <asm/imx-common/gpio.h>
  17
  18 #if defined(CONFIG_TARGET_GE_B450V3)
  19 #define CONFIG_BOARD_NAME       "General Electric B450v3"
  20 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
  21 #elif defined(CONFIG_TARGET_GE_B650V3)
  22 #define CONFIG_BOARD_NAME       "General Electric B650v3"
  23 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b650v3.dtb"
  24 #elif defined(CONFIG_TARGET_GE_B850V3)
  25 #define CONFIG_BOARD_NAME       "General Electric B850v3"
  26 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
  27 #else
  28 #define CONFIG_BOARD_NAME       "General Electric BA16 Generic"
  29 #define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
  30 #endif
  31
  32 #define CONFIG_MXC_UART_BASE    UART3_BASE
  33 #define CONFIG_CONSOLE_DEV      "ttymxc2"
  34
  35 #define CONFIG_SUPPORT_EMMC_BOOT
  36
  37
  38 #include "mx6_common.h"
  39 #include <linux/sizes.h>
  40
  41 #define CONFIG_DISPLAY_CPUINFO
  42 #define CONFIG_DISPLAY_BOARDINFO
  43
  44 #define CONFIG_CMDLINE_TAG
  45 #define CONFIG_SETUP_MEMORY_TAGS
  46 #define CONFIG_INITRD_TAG
  47 #define CONFIG_REVISION_TAG
  48 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  49
  50 #define CONFIG_BOARD_EARLY_INIT_F
  51 #define CONFIG_BOARD_LATE_INIT
  52
  53 #define CONFIG_MXC_GPIO
  54 #define CONFIG_MXC_UART
  55
  56 #define CONFIG_CMD_FUSE
  57 #define CONFIG_MXC_OCOTP
  58
  59 /* SATA Configs */
  60 #ifdef CONFIG_CMD_SATA
  61 #define CONFIG_DWC_AHSATA
  62 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  63 #define CONFIG_DWC_AHSATA_PORT_ID       0
  64 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  65 #define CONFIG_LBA48
  66 #define CONFIG_LIBATA
  67 #endif
  68
  69 /* MMC Configs */
  70 #define CONFIG_FSL_ESDHC
  71 #define CONFIG_FSL_USDHC
  72 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  73 #define CONFIG_MMC
  74 #define CONFIG_GENERIC_MMC
  75 #define CONFIG_BOUNCE_BUFFER
  76 #define CONFIG_DOS_PARTITION
  77
  78 /* USB Configs */
  79 #ifdef CONFIG_USB
  80 #define CONFIG_USB_EHCI
  81 #define CONFIG_USB_EHCI_MX6
  82 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  83 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  84 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  85 #define CONFIG_MXC_USB_FLAGS    0
  86 #define CONFIG_USB_KEYBOARD
  87 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  88
  89 #define CONFIG_CI_UDC
  90 #define CONFIG_USBD_HS
  91 #define CONFIG_USB_GADGET_DUALSPEED
  92 #define CONFIG_USB_GADGET
  93 #define CONFIG_USB_GADGET_DOWNLOAD
  94 #define CONFIG_USB_GADGET_MASS_STORAGE
  95 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  96 #define CONFIG_USB_GADGET_VBUS_DRAW 2
  97 #define CONFIG_G_DNL_VENDOR_NUM   0x0525
  98 #define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
  99 #define CONFIG_G_DNL_MANUFACTURER "Advantech"
 100 #endif
 101
 102 /* Networking Configs */
 103 #ifdef CONFIG_NET
 104 #define CONFIG_FEC_MXC
 105 #define CONFIG_MII
 106 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 107 #define CONFIG_FEC_XCV_TYPE             RGMII
 108 #define CONFIG_ETHPRIME         "FEC"
 109 #define CONFIG_FEC_MXC_PHYADDR          4
 110 #define CONFIG_PHYLIB
 111 #define CONFIG_PHY_ATHEROS
 112 #endif
 113
 114 /* Serial Flash */
 115 #ifdef CONFIG_CMD_SF
 116 #define CONFIG_MXC_SPI
 117 #define CONFIG_SF_DEFAULT_BUS           0
 118 #define CONFIG_SF_DEFAULT_CS            0
 119 #define CONFIG_SF_DEFAULT_SPEED 20000000
 120 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 121 #endif
 122
 123 /* allow to overwrite serial and ethaddr */
 124 #define CONFIG_ENV_OVERWRITE
 125 #define CONFIG_CONS_INDEX       1
 126 #define CONFIG_BAUDRATE 115200
 127
 128 /* Command definition */
 129 #define CONFIG_CMD_BMODE
 130
 131 #define CONFIG_LOADADDR 0x12000000
 132 #define CONFIG_SYS_TEXT_BASE    0x17800000
 133
 134 #define CONFIG_EXTRA_ENV_SETTINGS \
 135         "script=boot.scr\0" \
 136         "image=/boot/uImage\0" \
 137         "uboot=u-boot.imx\0" \
 138         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 139         "fdt_addr=0x18000000\0" \
 140         "boot_fdt=yes\0" \
 141         "ip_dyn=yes\0" \
 142         "console=" CONFIG_CONSOLE_DEV "\0" \
 143         "fdt_high=0xffffffff\0"   \
 144         "initrd_high=0xffffffff\0" \
 145         "sddev=0\0" \
 146         "emmcdev=1\0" \
 147         "partnum=1\0" \
 148         "update_sd_firmware=" \
 149                 "if test ${ip_dyn} = yes; then " \
 150                         "setenv get_cmd dhcp; " \
 151                 "else " \
 152                         "setenv get_cmd tftp; " \
 153                 "fi; " \
 154                 "if mmc dev ${mmcdev}; then "   \
 155                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 156                                 "setexpr fw_sz ${filesize} / 0x200; " \
 157                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 158                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 159                         "fi; "  \
 160                 "fi\0" \
 161         "update_sf_uboot=" \
 162                 "if tftp $loadaddr $uboot; then " \
 163                         "sf probe; " \
 164                         "sf erase 0 0xC0000; " \
 165                         "sf write $loadaddr 0x400 $filesize; " \
 166                         "echo 'U-Boot upgraded. Please reset'; " \
 167                 "fi\0" \
 168         "setargs=setenv bootargs console=${console},${baudrate} " \
 169                 "root=/dev/${rootdev} rw rootwait cma=128M\0" \
 170         "loadbootscript=" \
 171                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 172         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 173                 " source\0" \
 174         "loadimage=" \
 175                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 176         "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 177         "tryboot=" \
 178                 "if run loadbootscript; then " \
 179                         "run bootscript; " \
 180                 "else " \
 181                         "if run loadimage; then " \
 182                                 "run doboot; " \
 183                         "fi; " \
 184                 "fi;\0" \
 185         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 186                 "run setargs; " \
 187                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 188                         "if run loadfdt; then " \
 189                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 190                         "else " \
 191                                 "if test ${boot_fdt} = try; then " \
 192                                         "bootm; " \
 193                                 "else " \
 194                                         "echo WARN: Cannot load the DT; " \
 195                                 "fi; " \
 196                         "fi; " \
 197                 "else " \
 198                         "bootm; " \
 199                 "fi;\0" \
 200         "netargs=setenv bootargs console=${console},${baudrate} " \
 201                 "root=/dev/nfs " \
 202                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 203         "netboot=echo Booting from net ...; " \
 204                 "run netargs; " \
 205                 "if test ${ip_dyn} = yes; then " \
 206                         "setenv get_cmd dhcp; " \
 207                 "else " \
 208                         "setenv get_cmd tftp; " \
 209                 "fi; " \
 210                 "${get_cmd} ${image}; " \
 211                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 212                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 213                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 214                         "else " \
 215                                 "if test ${boot_fdt} = try; then " \
 216                                         "bootm; " \
 217                                 "else " \
 218                                         "echo WARN: Cannot load the DT; " \
 219                                 "fi; " \
 220                         "fi; " \
 221                 "else " \
 222                         "bootm; " \
 223                 "fi;\0" \
 224
 225 #define CONFIG_MMCBOOTCOMMAND \
 226         "setenv dev mmc; " \
 227         "setenv rootdev mmcblk0p${partnum}; " \
 228         \
 229         "setenv devnum ${sddev}; " \
 230         "if mmc dev ${devnum}; then " \
 231                 "run tryboot; " \
 232                 "setenv rootdev mmcblk1p${partnum}; " \
 233         "fi; " \
 234         \
 235         "setenv devnum ${emmcdev}; " \
 236         "if mmc dev ${devnum}; then " \
 237                 "run tryboot; " \
 238         "fi; " \
 239
 240 #define CONFIG_USBBOOTCOMMAND \
 241         "usb start; " \
 242         "setenv dev usb; " \
 243         "setenv devnum 0; " \
 244         "setenv rootdev sda${partnum}; " \
 245         "run tryboot; " \
 246         \
 247         CONFIG_MMCBOOTCOMMAND \
 248         "bmode usb; " \
 249
 250 #ifdef CONFIG_CMD_USB
 251 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 252 #else
 253 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 254 #endif
 255
 256 #define CONFIG_ARP_TIMEOUT     200UL
 257
 258 /* Miscellaneous configurable options */
 259 #define CONFIG_SYS_LONGHELP
 260 #define CONFIG_AUTO_COMPLETE
 261
 262 /* Print Buffer Size */
 263 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 264 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 265
 266 #define CONFIG_SYS_MEMTEST_START       0x10000000
 267 #define CONFIG_SYS_MEMTEST_END         0x10010000
 268 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 269
 270 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 271
 272 #define CONFIG_CMDLINE_EDITING
 273 #define CONFIG_STACKSIZE               (128 * 1024)
 274
 275 /* Physical Memory Map */
 276 #define CONFIG_NR_DRAM_BANKS           1
 277 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 278
 279 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 280 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 281 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 282
 283 #define CONFIG_SYS_INIT_SP_OFFSET \
 284         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 285 #define CONFIG_SYS_INIT_SP_ADDR \
 286         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 287
 288 /* FLASH and environment organization */
 289 #define CONFIG_SYS_NO_FLASH
 290
 291 #define CONFIG_ENV_IS_IN_SPI_FLASH
 292 #define CONFIG_ENV_SIZE         (8 * 1024)
 293 #define CONFIG_ENV_OFFSET               (768 * 1024)
 294 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 295 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 296 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 297 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 298 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 299
 300 #ifndef CONFIG_SYS_DCACHE_OFF
 301 #endif
 302
 303 #define CONFIG_SYS_FSL_USDHC_NUM        3
 304
 305 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 306 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 307
 308 /* Framebuffer */
 309 #ifdef CONFIG_VIDEO
 310 #define CONFIG_VIDEO_IPUV3
 311 #define CONFIG_CFB_CONSOLE
 312 #define CONFIG_VGA_AS_SINGLE_DEVICE
 313 #define CONFIG_VIDEO_BMP_RLE8
 314 #define CONFIG_SPLASH_SCREEN
 315 #define CONFIG_SPLASH_SCREEN_ALIGN
 316 #define CONFIG_BMP_16BPP
 317 #define CONFIG_VIDEO_LOGO
 318 #define CONFIG_VIDEO_BMP_LOGO
 319 #define CONFIG_IPUV3_CLK 260000000
 320 #define CONFIG_IMX_HDMI
 321 #define CONFIG_IMX_VIDEO_SKIP
 322 #endif
 323
 324 #define CONFIG_PWM_IMX
 325 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 326
 327 #undef CONFIG_CMD_PCI
 328 #ifdef CONFIG_CMD_PCI
 329 #define CONFIG_PCI
 330 #define CONFIG_PCI_PNP
 331 #define CONFIG_PCI_SCAN_SHOW
 332 #define CONFIG_PCIE_IMX
 333 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 334 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 335 #endif
 336
 337 /* I2C Configs */
 338 #define CONFIG_SYS_I2C
 339 #define CONFIG_SYS_I2C_MXC
 340 #define CONFIG_SYS_I2C_SPEED              100000
 341 #define CONFIG_SYS_I2C_MXC_I2C1
 342 #define CONFIG_SYS_I2C_MXC_I2C2
 343 #define CONFIG_SYS_I2C_MXC_I2C3
 344
 345 #endif  /* __GE_BX50V3_CONFIG_H */