include/configs/ge_bx50v3.h

   1 /*
   2  * Copyright (C) 2015 Timesys Corporation
   3  * Copyright (C) 2015 General Electric Company
   4  * Copyright (C) 2014 Advantech
   5  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   6  *
   7  * Configuration settings for the GE MX6Q Bx50v3 boards.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __GE_BX50V3_CONFIG_H
  13 #define __GE_BX50V3_CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <asm/imx-common/gpio.h>
  17
  18 #define BX50V3_BOOTARGS_EXTRA
  19 #if defined(CONFIG_TARGET_GE_B450V3)
  20 #define CONFIG_BOARD_NAME       "General Electric B450v3"
  21 #elif defined(CONFIG_TARGET_GE_B650V3)
  22 #define CONFIG_BOARD_NAME       "General Electric B650v3"
  23 #elif defined(CONFIG_TARGET_GE_B850V3)
  24 #define CONFIG_BOARD_NAME       "General Electric B850v3"
  25 #undef BX50V3_BOOTARGS_EXTRA
  26 #define BX50V3_BOOTARGS_EXTRA   "video=DP-1:1024x768@60 " \
  27                                 "video=HDMI-A-1:1024x768@60 "
  28 #else
  29 #define CONFIG_BOARD_NAME       "General Electric BA16 Generic"
  30 #endif
  31
  32 #define CONFIG_MXC_UART_BASE    UART3_BASE
  33 #define CONSOLE_DEV     "ttymxc2"
  34
  35 #define CONFIG_SUPPORT_EMMC_BOOT
  36
  37
  38 #include "mx6_common.h"
  39 #include <linux/sizes.h>
  40
  41 #define CONFIG_CMDLINE_TAG
  42 #define CONFIG_SETUP_MEMORY_TAGS
  43 #define CONFIG_INITRD_TAG
  44 #define CONFIG_REVISION_TAG
  45 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  46
  47 #define CONFIG_MXC_GPIO
  48 #define CONFIG_MXC_UART
  49
  50 #define CONFIG_CMD_FUSE
  51 #define CONFIG_MXC_OCOTP
  52
  53 /* SATA Configs */
  54 #ifdef CONFIG_CMD_SATA
  55 #define CONFIG_DWC_AHSATA
  56 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  57 #define CONFIG_DWC_AHSATA_PORT_ID       0
  58 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  59 #define CONFIG_LBA48
  60 #define CONFIG_LIBATA
  61 #endif
  62
  63 /* MMC Configs */
  64 #define CONFIG_FSL_ESDHC
  65 #define CONFIG_FSL_USDHC
  66 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  67 #define CONFIG_BOUNCE_BUFFER
  68
  69 /* USB Configs */
  70 #ifdef CONFIG_USB
  71 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  72 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  73 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  74 #define CONFIG_MXC_USB_FLAGS    0
  75 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  76
  77 #define CONFIG_CI_UDC
  78 #define CONFIG_USBD_HS
  79 #define CONFIG_USB_GADGET_DUALSPEED
  80 #define CONFIG_USB_GADGET
  81 #define CONFIG_USB_GADGET_DOWNLOAD
  82 #define CONFIG_USB_GADGET_MASS_STORAGE
  83 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  84 #define CONFIG_USB_GADGET_VBUS_DRAW 2
  85 #define CONFIG_G_DNL_VENDOR_NUM   0x0525
  86 #define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
  87 #define CONFIG_G_DNL_MANUFACTURER "Advantech"
  88 #endif
  89
  90 /* Networking Configs */
  91 #ifdef CONFIG_NET
  92 #define CONFIG_FEC_MXC
  93 #define CONFIG_MII
  94 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  95 #define CONFIG_FEC_XCV_TYPE             RGMII
  96 #define CONFIG_ETHPRIME         "FEC"
  97 #define CONFIG_FEC_MXC_PHYADDR          4
  98 #define CONFIG_PHYLIB
  99 #define CONFIG_PHY_ATHEROS
 100 #endif
 101
 102 /* Serial Flash */
 103 #ifdef CONFIG_CMD_SF
 104 #define CONFIG_MXC_SPI
 105 #define CONFIG_SF_DEFAULT_BUS           0
 106 #define CONFIG_SF_DEFAULT_CS            0
 107 #define CONFIG_SF_DEFAULT_SPEED 20000000
 108 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 109 #endif
 110
 111 /* allow to overwrite serial and ethaddr */
 112 #define CONFIG_ENV_OVERWRITE
 113 #define CONFIG_CONS_INDEX       1
 114
 115 #define CONFIG_LOADADDR 0x12000000
 116 #define CONFIG_SYS_TEXT_BASE    0x17800000
 117
 118 #define CONFIG_EXTRA_ENV_SETTINGS \
 119         "script=boot.scr\0" \
 120         "image=/boot/uImage\0" \
 121         "uboot=u-boot.imx\0" \
 122         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 123         "fdt_addr=0x18000000\0" \
 124         "boot_fdt=yes\0" \
 125         "ip_dyn=yes\0" \
 126         "console=" CONSOLE_DEV "\0" \
 127         "fdt_high=0xffffffff\0"   \
 128         "initrd_high=0xffffffff\0" \
 129         "sddev=0\0" \
 130         "emmcdev=1\0" \
 131         "partnum=1\0" \
 132         "update_sd_firmware=" \
 133                 "if test ${ip_dyn} = yes; then " \
 134                         "setenv get_cmd dhcp; " \
 135                 "else " \
 136                         "setenv get_cmd tftp; " \
 137                 "fi; " \
 138                 "if mmc dev ${mmcdev}; then "   \
 139                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 140                                 "setexpr fw_sz ${filesize} / 0x200; " \
 141                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 142                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 143                         "fi; "  \
 144                 "fi\0" \
 145         "update_sf_uboot=" \
 146                 "if tftp $loadaddr $uboot; then " \
 147                         "sf probe; " \
 148                         "sf erase 0 0xC0000; " \
 149                         "sf write $loadaddr 0x400 $filesize; " \
 150                         "echo 'U-Boot upgraded. Please reset'; " \
 151                 "fi\0" \
 152         "setargs=setenv bootargs console=${console},${baudrate} " \
 153                 "root=/dev/${rootdev} rw rootwait cma=128M " \
 154                 BX50V3_BOOTARGS_EXTRA "\0" \
 155         "loadbootscript=" \
 156                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 157         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 158                 " source\0" \
 159         "loadimage=" \
 160                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 161         "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 162         "tryboot=" \
 163                 "if run loadbootscript; then " \
 164                         "run bootscript; " \
 165                 "else " \
 166                         "if run loadimage; then " \
 167                                 "run doboot; " \
 168                         "fi; " \
 169                 "fi;\0" \
 170         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 171                 "run setargs; " \
 172                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 173                         "if run loadfdt; then " \
 174                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 175                         "else " \
 176                                 "if test ${boot_fdt} = try; then " \
 177                                         "bootm; " \
 178                                 "else " \
 179                                         "echo WARN: Cannot load the DT; " \
 180                                 "fi; " \
 181                         "fi; " \
 182                 "else " \
 183                         "bootm; " \
 184                 "fi;\0" \
 185         "netargs=setenv bootargs console=${console},${baudrate} " \
 186                 "root=/dev/nfs " \
 187                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 188         "netboot=echo Booting from net ...; " \
 189                 "run netargs; " \
 190                 "if test ${ip_dyn} = yes; then " \
 191                         "setenv get_cmd dhcp; " \
 192                 "else " \
 193                         "setenv get_cmd tftp; " \
 194                 "fi; " \
 195                 "${get_cmd} ${image}; " \
 196                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 197                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 198                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 199                         "else " \
 200                                 "if test ${boot_fdt} = try; then " \
 201                                         "bootm; " \
 202                                 "else " \
 203                                         "echo WARN: Cannot load the DT; " \
 204                                 "fi; " \
 205                         "fi; " \
 206                 "else " \
 207                         "bootm; " \
 208                 "fi;\0" \
 209
 210 #define CONFIG_MMCBOOTCOMMAND \
 211         "setenv dev mmc; " \
 212         "setenv rootdev mmcblk0p${partnum}; " \
 213         \
 214         "setenv devnum ${sddev}; " \
 215         "if mmc dev ${devnum}; then " \
 216                 "run tryboot; " \
 217                 "setenv rootdev mmcblk1p${partnum}; " \
 218         "fi; " \
 219         \
 220         "setenv devnum ${emmcdev}; " \
 221         "if mmc dev ${devnum}; then " \
 222                 "run tryboot; " \
 223         "fi; " \
 224
 225 #define CONFIG_USBBOOTCOMMAND \
 226         "usb start; " \
 227         "setenv dev usb; " \
 228         "setenv devnum 0; " \
 229         "setenv rootdev sda${partnum}; " \
 230         "run tryboot; " \
 231         \
 232         CONFIG_MMCBOOTCOMMAND \
 233         "bmode usb; " \
 234
 235 #ifdef CONFIG_CMD_USB
 236 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 237 #else
 238 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 239 #endif
 240
 241 #define CONFIG_ARP_TIMEOUT     200UL
 242
 243 /* Miscellaneous configurable options */
 244 #define CONFIG_SYS_LONGHELP
 245 #define CONFIG_AUTO_COMPLETE
 246
 247 /* Print Buffer Size */
 248 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 249 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 250
 251 #define CONFIG_SYS_MEMTEST_START       0x10000000
 252 #define CONFIG_SYS_MEMTEST_END         0x10010000
 253 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 254
 255 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 256
 257 #define CONFIG_CMDLINE_EDITING
 258
 259 /* Physical Memory Map */
 260 #define CONFIG_NR_DRAM_BANKS           1
 261 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 262
 263 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 264 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 265 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 266
 267 #define CONFIG_SYS_INIT_SP_OFFSET \
 268         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 269 #define CONFIG_SYS_INIT_SP_ADDR \
 270         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 271
 272 /* environment organization */
 273 #define CONFIG_ENV_IS_IN_SPI_FLASH
 274 #define CONFIG_ENV_SIZE         (8 * 1024)
 275 #define CONFIG_ENV_OFFSET               (768 * 1024)
 276 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 277 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 278 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 279 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 280 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 281
 282 #ifndef CONFIG_SYS_DCACHE_OFF
 283 #endif
 284
 285 #define CONFIG_SYS_FSL_USDHC_NUM        3
 286
 287 /* Framebuffer */
 288 #ifdef CONFIG_VIDEO
 289 #define CONFIG_VIDEO_IPUV3
 290 #define CONFIG_VIDEO_BMP_RLE8
 291 #define CONFIG_SPLASH_SCREEN
 292 #define CONFIG_SPLASH_SCREEN_ALIGN
 293 #define CONFIG_BMP_16BPP
 294 #define CONFIG_VIDEO_LOGO
 295 #define CONFIG_VIDEO_BMP_LOGO
 296 #define CONFIG_IPUV3_CLK 260000000
 297 #define CONFIG_IMX_HDMI
 298 #define CONFIG_IMX_VIDEO_SKIP
 299 #endif
 300
 301 #define CONFIG_PWM_IMX
 302 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 303
 304 #undef CONFIG_CMD_PCI
 305 #ifdef CONFIG_CMD_PCI
 306 #define CONFIG_PCI_SCAN_SHOW
 307 #define CONFIG_PCIE_IMX
 308 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 309 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 310 #endif
 311
 312 /* I2C Configs */
 313 #define CONFIG_SYS_I2C
 314 #define CONFIG_SYS_I2C_MXC
 315 #define CONFIG_SYS_I2C_SPEED              100000
 316 #define CONFIG_SYS_I2C_MXC_I2C1
 317 #define CONFIG_SYS_I2C_MXC_I2C2
 318 #define CONFIG_SYS_I2C_MXC_I2C3
 319
 320 #endif  /* __GE_BX50V3_CONFIG_H */