include/configs/flea3.h

   1 /*
   2  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the flea3 board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_SYS_DCACHE_OFF
  22
  23 /* Only in case the value is not present in mach-types.h */
  24 #ifndef MACH_TYPE_FLEA3
  25 #define MACH_TYPE_FLEA3                3668
  26 #endif
  27
  28 #define CONFIG_MACH_TYPE                MACH_TYPE_FLEA3
  29
  30 /* Set TEXT at the beginning of the NOR flash */
  31 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  32
  33 /* This is required to setup the ESDC controller */
  34 #define CONFIG_BOARD_EARLY_INIT_F
  35
  36 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  37 #define CONFIG_REVISION_TAG
  38 #define CONFIG_SETUP_MEMORY_TAGS
  39 #define CONFIG_INITRD_TAG
  40
  41 /*
  42  * Size of malloc() pool
  43  */
  44 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  45
  46 /*
  47  * Hardware drivers
  48  */
  49 #define CONFIG_SYS_I2C
  50 #define CONFIG_SYS_I2C_MXC
  51 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  52 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  53 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  54 #define CONFIG_SYS_SPD_BUS_NUM          2 /* I2C3 */
  55 #define CONFIG_SYS_MXC_I2C3_SLAVE       0xfe
  56 #define CONFIG_MXC_SPI
  57 #define CONFIG_MXC_GPIO
  58
  59 /*
  60  * UART (console)
  61  */
  62 #define CONFIG_MXC_UART
  63 #define CONFIG_MXC_UART_BASE    UART3_BASE
  64
  65 /* allow to overwrite serial and ethaddr */
  66 #define CONFIG_ENV_OVERWRITE
  67 #define CONFIG_CONS_INDEX       1
  68 #define CONFIG_BAUDRATE         115200
  69
  70 /*
  71  * Command definition
  72  */
  73 #define CONFIG_BOOTP_SUBNETMASK
  74 #define CONFIG_BOOTP_GATEWAY
  75 #define CONFIG_BOOTP_DNS
  76
  77 #define CONFIG_CMD_NAND
  78
  79 #define CONFIG_NET_RETRY_COUNT  100
  80
  81
  82 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  83
  84 /*
  85  * Ethernet on SOC (FEC)
  86  */
  87 #define CONFIG_FEC_MXC
  88 #define IMX_FEC_BASE    FEC_BASE_ADDR
  89 #define CONFIG_PHYLIB
  90 #define CONFIG_PHY_MICREL
  91 #define CONFIG_FEC_MXC_PHYADDR  0x1
  92
  93 #define CONFIG_MII
  94
  95 #define CONFIG_ARP_TIMEOUT      200UL
  96
  97 /*
  98  * Miscellaneous configurable options
  99  */
 100 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 101 #define CONFIG_CMDLINE_EDITING
 102
 103 #define CONFIG_AUTO_COMPLETE
 104 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 105 /* Print Buffer Size */
 106 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 107 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 108 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 109
 110 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 111 #define CONFIG_SYS_MEMTEST_END          0x10000
 112
 113 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 114
 115 /*
 116  * Physical Memory Map
 117  */
 118 #define CONFIG_NR_DRAM_BANKS    1
 119 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 120 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 121
 122 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 123 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 124 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 125 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 126                                         GENERATED_GBL_DATA_SIZE)
 127 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 128                                         CONFIG_SYS_GBL_DATA_OFFSET)
 129
 130 /*
 131  * MTD Command for mtdparts
 132  */
 133 #define CONFIG_CMD_MTDPARTS
 134 #define CONFIG_MTD_DEVICE
 135 #define CONFIG_FLASH_CFI_MTD
 136 #define CONFIG_MTD_PARTITIONS
 137 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 138 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:50m(root1)," \
 139                                 "32m(rootfb)," \
 140                                 "64m(pcache)," \
 141                                 "64m(app1)," \
 142                                 "10m(app2),-(spool);" \
 143                                 "physmap-flash.0:512k(u-boot),64k(env1)," \
 144                                 "64k(env2),3776k(kernel1),3776k(kernel2)"
 145
 146 /*
 147  * FLASH and environment organization
 148  */
 149 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 150 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 151 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 152 /* Monitor at beginning of flash */
 153 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 154 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 155
 156 #define CONFIG_ENV_SECT_SIZE    (64 * 1024)
 157 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 158
 159 /* Address and size of Redundant Environment Sector     */
 160 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 161 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 162
 163 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 164                                 CONFIG_SYS_MONITOR_LEN)
 165
 166 #define CONFIG_ENV_IS_IN_FLASH
 167
 168 /*
 169  * CFI FLASH driver setup
 170  */
 171 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 172 #define CONFIG_FLASH_CFI_DRIVER
 173
 174 /* A non-standard buffered write algorithm */
 175 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 176 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 177
 178 /*
 179  * NAND FLASH driver setup
 180  */
 181 #define CONFIG_NAND_MXC
 182 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 183 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 184 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 185 #define CONFIG_MXC_NAND_HWECC
 186 #define CONFIG_SYS_NAND_LARGEPAGE
 187
 188 /*
 189  * Default environment and default scripts
 190  * to update uboot and load kernel
 191  */
 192
 193 #define CONFIG_HOSTNAME flea3
 194 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 195         "netdev=eth0\0"                                                 \
 196         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 197                 "nfsroot=${serverip}:${rootpath}\0"                     \
 198         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 199         "addip_sta=setenv bootargs ${bootargs} "                        \
 200                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 201                 ":${hostname}:${netdev}:off panic=1\0"                  \
 202         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 203         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 204                 "else run addip_sta;fi\0"                               \
 205         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 206         "addtty=setenv bootargs ${bootargs}"                            \
 207                 " console=ttymxc2,${baudrate}\0"                        \
 208         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 209         "loadaddr=80800000\0"                                           \
 210         "kernel_addr_r=80800000\0"                                      \
 211         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 212         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 213         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 214         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 215                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 216         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 217                 "bootm ${kernel_addr}\0"                                \
 218         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 219                 "run nfsargs addip addtty addmtd addmisc;"              \
 220                 "bootm ${kernel_addr_r}\0"                              \
 221         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 222                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 223         "net_self=if run net_self_load;then "                           \
 224                 "run ramargs addip addtty addmtd addmisc;"              \
 225                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 226                 "else echo Images not loades;fi\0"                      \
 227         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 228         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 229         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 230         "update=protect off ${uboot_addr} +40000;"                      \
 231                 "erase ${uboot_addr} +40000;"                           \
 232                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 233         "upd=if run load;then echo Updating u-boot;if run update;"      \
 234                 "then echo U-Boot updated;"                             \
 235                         "else echo Error updating u-boot !;"            \
 236                         "echo Board without bootloader !!;"             \
 237                 "fi;"                                                   \
 238                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 239         "bootcmd=run net_nfs\0"
 240
 241 #endif                          /* __CONFIG_H */