include/configs/flea3.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
   4  *
   5  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   6  *
   7  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   8  *
   9  * Configuration for the flea3 board.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17  /* High Level Configuration Options */
  18 #define CONFIG_MX35
  19
  20 #define CONFIG_SYS_DCACHE_OFF
  21
  22 #define CONFIG_MACH_TYPE                MACH_TYPE_FLEA3
  23
  24 /* Set TEXT at the beginning of the NOR flash */
  25
  26 /* This is required to setup the ESDC controller */
  27
  28 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  29 #define CONFIG_REVISION_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32
  33 /*
  34  * Size of malloc() pool
  35  */
  36 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  37
  38 /*
  39  * Hardware drivers
  40  */
  41 #define CONFIG_SYS_I2C
  42 #define CONFIG_SYS_I2C_MXC
  43 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  44 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  45 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  46 #define CONFIG_SYS_SPD_BUS_NUM          2 /* I2C3 */
  47 #define CONFIG_SYS_MXC_I2C3_SLAVE       0xfe
  48
  49 /*
  50  * UART (console)
  51  */
  52 #define CONFIG_MXC_UART
  53 #define CONFIG_MXC_UART_BASE    UART3_BASE
  54
  55 /* allow to overwrite serial and ethaddr */
  56 #define CONFIG_ENV_OVERWRITE
  57
  58 /*
  59  * Command definition
  60  */
  61
  62 #define CONFIG_NET_RETRY_COUNT  100
  63
  64
  65 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  66
  67 /*
  68  * Ethernet on SOC (FEC)
  69  */
  70 #define CONFIG_FEC_MXC
  71 #define IMX_FEC_BASE    FEC_BASE_ADDR
  72 #define CONFIG_FEC_MXC_PHYADDR  0x1
  73
  74 #define CONFIG_ARP_TIMEOUT      200UL
  75
  76 /*
  77  * Miscellaneous configurable options
  78  */
  79
  80 #define CONFIG_SYS_CBSIZE       512     /* Console I/O Buffer Size */
  81 /* Print Buffer Size */
  82 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
  83
  84 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
  85 #define CONFIG_SYS_MEMTEST_END          0x10000
  86
  87 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  88
  89 /*
  90  * Physical Memory Map
  91  */
  92 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
  93 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
  94
  95 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
  96 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
  97 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
  98 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
  99                                         GENERATED_GBL_DATA_SIZE)
 100 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 101                                         CONFIG_SYS_GBL_DATA_OFFSET)
 102
 103 /*
 104  * MTD Command for mtdparts
 105  */
 106
 107 /*
 108  * FLASH and environment organization
 109  */
 110 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 111 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 112 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 113 /* Monitor at beginning of flash */
 114 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 115 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 116
 117 #define CONFIG_ENV_SECT_SIZE    (64 * 1024)
 118 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 119
 120 /* Address and size of Redundant Environment Sector     */
 121 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 122 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 123
 124 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 125                                 CONFIG_SYS_MONITOR_LEN)
 126
 127 /*
 128  * CFI FLASH driver setup
 129  */
 130
 131 /* A non-standard buffered write algorithm */
 132
 133 /*
 134  * NAND FLASH driver setup
 135  */
 136 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 137 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 138 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 139 #define CONFIG_MXC_NAND_HWECC
 140 #define CONFIG_SYS_NAND_LARGEPAGE
 141
 142 /*
 143  * Default environment and default scripts
 144  * to update uboot and load kernel
 145  */
 146
 147 #define CONFIG_HOSTNAME "flea3"
 148 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 149         "netdev=eth0\0"                                                 \
 150         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 151                 "nfsroot=${serverip}:${rootpath}\0"                     \
 152         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 153         "addip_sta=setenv bootargs ${bootargs} "                        \
 154                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 155                 ":${hostname}:${netdev}:off panic=1\0"                  \
 156         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 157         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 158                 "else run addip_sta;fi\0"                               \
 159         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 160         "addtty=setenv bootargs ${bootargs}"                            \
 161                 " console=ttymxc2,${baudrate}\0"                        \
 162         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 163         "loadaddr=80800000\0"                                           \
 164         "kernel_addr_r=80800000\0"                                      \
 165         "hostname=" CONFIG_HOSTNAME "\0"                        \
 166         "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
 167         "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"   \
 168         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 169                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 170         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 171                 "bootm ${kernel_addr}\0"                                \
 172         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 173                 "run nfsargs addip addtty addmtd addmisc;"              \
 174                 "bootm ${kernel_addr_r}\0"                              \
 175         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 176                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 177         "net_self=if run net_self_load;then "                           \
 178                 "run ramargs addip addtty addmtd addmisc;"              \
 179                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 180                 "else echo Images not loades;fi\0"                      \
 181         "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
 182         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 183         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 184         "update=protect off ${uboot_addr} +80000;"                      \
 185                 "erase ${uboot_addr} +80000;"                           \
 186                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 187         "upd=if run load;then echo Updating u-boot;if run update;"      \
 188                 "then echo U-Boot updated;"                             \
 189                         "else echo Error updating u-boot !;"            \
 190                         "echo Board without bootloader !!;"             \
 191                 "fi;"                                                   \
 192                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 193         "bootcmd=run net_nfs\0"
 194
 195 #endif                          /* __CONFIG_H */