Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
[platform/kernel/u-boot.git] / include / configs / etamin.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  */
11
12 #ifndef __CONFIG_ETAMIN_H
13 #define __CONFIG_ETAMIN_H
14
15 #include "siemens-am33x-common.h"
16 /* NAND specific changes for etamin due to different page size */
17 #undef CONFIG_SYS_NAND_PAGE_SIZE
18 #undef CONFIG_SYS_NAND_OOBSIZE
19 #undef CONFIG_SYS_NAND_BLOCK_SIZE
20 #undef CONFIG_SYS_NAND_ECCPOS
21 #undef CONFIG_SYS_NAND_U_BOOT_OFFS
22 #undef CONFIG_SYS_ENV_SECT_SIZE
23 #undef CONFIG_NAND_OMAP_ECCSCHEME
24 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH16_CODE_HW
25
26 #define CONFIG_SYS_ENV_SECT_SIZE       (512 << 10)     /* 512 KiB */
27 #define CONFIG_SYS_NAND_PAGE_SIZE       4096
28 #define CONFIG_SYS_NAND_OOBSIZE         224
29 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * CONFIG_SYS_NAND_PAGE_SIZE)
30 #define CONFIG_SYS_NAND_ECCPOS  { 2, 3, 4, 5, 6, 7, 8, 9, \
31                                 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
32                                 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
33                                 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
34                                 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
35                                 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
36                                 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
37                                 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
38                                 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
39                                 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
40                         100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
41                         110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
42                         120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
43                         130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
44                         140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
45                         150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
46                         160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
47                         170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
48                         180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
49                         190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
50                         200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
51                         }
52
53 #undef CONFIG_SYS_NAND_ECCSIZE
54 #undef CONFIG_SYS_NAND_ECCBYTES
55 #define CONFIG_SYS_NAND_ECCSIZE 512
56 #define CONFIG_SYS_NAND_ECCBYTES 26
57
58 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000
59
60 #define CONFIG_SYS_NAND_MAX_CHIPS       1
61
62 #undef CONFIG_SYS_MAX_NAND_DEVICE
63 #define CONFIG_SYS_MAX_NAND_DEVICE      3
64 #define CONFIG_SYS_NAND_BASE2           (0x18000000)    /* physical address */
65 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, \
66                                         CONFIG_SYS_NAND_BASE2}
67
68 #define CONFIG_SYS_NAND_ONFI_DETECTION
69 #define DDR_PLL_FREQ    303
70
71 /* FWD Button = 27
72  * SRV Button = 87 */
73 #define BOARD_DFU_BUTTON_GPIO   27
74 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
75 /* In dfu mode keep led1 on */
76 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
77         "button_dfu0=27\0" \
78         "button_dfu1=87\0" \
79         "led0=3,0,1\0" \
80         "led1=4,0,0\0" \
81         "led2=5,0,1\0" \
82         "led3=87,0,1\0" \
83         "led4=60,0,1\0" \
84         "led5=63,0,1\0"
85
86 /* Physical Memory Map */
87 #define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
88
89 /* I2C Configuration */
90 #define CONFIG_SYS_I2C_SPEED            100000
91
92 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
93 #define EEPROM_ADDR_DDR3 0x90
94 #define EEPROM_ADDR_CHIP 0x120
95
96 #define CONFIG_FACTORYSET
97
98 /* use both define to compile a SPL compliance test  */
99 /*
100 #define CONFIG_SPL_CMT
101 #define CONFIG_SPL_CMT_DEBUG
102 */
103
104 /* nedded by compliance test in read mode */
105 #if defined(CONFIG_SPL_CMT)
106 #define CONFIG_SYS_DCACHE_OFF
107 #endif
108
109 /* Define own nand partitions */
110 #define CONFIG_ENV_RANGE                (4 * CONFIG_SYS_ENV_SECT_SIZE)
111
112
113
114 #undef COMMON_ENV_DFU_ARGS
115 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
116                                 "setenv bootargs ${bootargs};" \
117                                 "mtdparts default;" \
118                                 "draco_led 1;" \
119                                 "dfu 0 mtd 0;" \
120                                 "draco_led 0;\0" \
121
122 #undef DFU_ALT_INFO_NAND_V2
123 #define DFU_ALT_INFO_NAND_V2 \
124         "spl mtddev;" \
125         "spl.backup1 mtddev;" \
126         "spl.backup2 mtddev;" \
127         "spl.backup3 mtddev;" \
128         "u-boot mtddev;" \
129         "u-boot.env0 mtddev;" \
130         "u-boot.env1 mtddev;" \
131         "rootfs mtddevubi" \
132
133 #undef CONFIG_ENV_SETTINGS_NAND_V2
134 #define CONFIG_ENV_SETTINGS_NAND_V2 \
135         "nand_active_ubi_vol=rootfs_a\0" \
136         "rootfs_name=rootfs\0" \
137         "kernel_name=uImage\0"\
138         "nand_root_fs_type=ubifs rootwait=1\0" \
139         "nand_args=run bootargs_defaults;" \
140                 "mtdparts default;" \
141                 "setenv ${partitionset_active} true;" \
142                 "if test -n ${A}; then " \
143                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
144                 "fi;" \
145                 "if test -n ${B}; then " \
146                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
147                 "fi;" \
148                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
149                 "ubi.mtd=rootfs,${ubi_off};" \
150                 "setenv bootargs ${bootargs} " \
151                 "root=${nand_root} noinitrd ${mtdparts} " \
152                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
153                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
154                 "=mtdoops\0" \
155         COMMON_ENV_DFU_ARGS \
156                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
157         COMMON_ENV_NAND_BOOT \
158                 "ubi part rootfs ${ubi_off};" \
159                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
160                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
161                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
162                 "bootm ${kloadaddr} - ${loadaddr}\0" \
163         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
164                 "bootm ${kloadaddr} - ${loadaddr}\0" \
165         COMMON_ENV_NAND_CMDS
166
167 #ifndef CONFIG_SPL_BUILD
168
169 #define CONFIG_NAND_CS_INIT
170 #define ETAMIN_NAND_GPMC_CONFIG1        0x00000800
171 #define ETAMIN_NAND_GPMC_CONFIG2        0x001e1e00
172 #define ETAMIN_NAND_GPMC_CONFIG3        0x001e1e00
173 #define ETAMIN_NAND_GPMC_CONFIG4        0x16051807
174 #define ETAMIN_NAND_GPMC_CONFIG5        0x00151e1e
175 #define ETAMIN_NAND_GPMC_CONFIG6        0x16000f80
176 #define CONFIG_MTD_CONCAT
177
178 /* Default env settings */
179 #define CONFIG_EXTRA_ENV_SETTINGS \
180         "hostname=etamin\0" \
181         "ubi_off=4096\0"\
182         "nand_img_size=0x400000\0" \
183         "optargs=\0" \
184         "preboot=draco_led 0\0" \
185         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
186         CONFIG_ENV_SETTINGS_V2 \
187         CONFIG_ENV_SETTINGS_NAND_V2
188
189 #ifndef CONFIG_RESTORE_FLASH
190
191 #define CONFIG_BOOTCOMMAND \
192 "if dfubutton; then " \
193         "run dfu_start; " \
194         "reset; " \
195 "fi;" \
196 "run nand_boot;" \
197 "run nand_boot_backup;" \
198 "reset;"
199
200
201 #else
202 #define CONFIG_BOOTCOMMAND                      \
203         "setenv autoload no; "                  \
204         "dhcp; "                                \
205         "if tftp 80000000 debrick.scr; then "   \
206                 "source 80000000; "             \
207         "fi"
208 #endif
209 #endif  /* CONFIG_SPL_BUILD */
210 #endif  /* ! __CONFIG_ETAMIN_H */