1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
5 * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
8 #ifndef _CONFIG_EB_CPU5282_H_
9 #define _CONFIG_EB_CPU5282_H_
11 #undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
13 /*----------------------------------------------------------------------*
14 * High Level Configuration Options (easy to change) *
15 *----------------------------------------------------------------------*/
17 #define CONFIG_SYS_UART_PORT (0)
19 #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
21 /*----------------------------------------------------------------------*
23 *----------------------------------------------------------------------*/
25 #define STATUS_LED_ACTIVE 0
27 /*----------------------------------------------------------------------*
28 * Configuration for environment *
29 * Environment is in the second sector of the first 256k of flash *
30 *----------------------------------------------------------------------*/
32 /*#define CONFIG_SYS_DRAM_TEST 1 */
33 #undef CONFIG_SYS_DRAM_TEST
35 /*----------------------------------------------------------------------*
36 * Clock and PLL Configuration *
37 *----------------------------------------------------------------------*/
38 #define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
40 /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
42 #define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
43 #define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
45 /*----------------------------------------------------------------------*
47 *----------------------------------------------------------------------*/
50 #define CONFIG_OVERWRITE_ETHADDR_ONCE
53 /*-------------------------------------------------------------------------
54 * Low Level Configuration Settings
55 * (address mappings, register initial values, etc.)
56 * You should know what you are doing if you make changes here.
57 *-----------------------------------------------------------------------*/
59 #define CONFIG_SYS_MBAR 0x40000000
61 /*-----------------------------------------------------------------------
62 * Definitions for initial stack pointer and data area (in DPRAM)
63 *-----------------------------------------------------------------------*/
65 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
66 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000
68 /*-----------------------------------------------------------------------
69 * Start addresses for the final memory configuration
70 * (Set up by the startup code)
71 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
73 #define CONFIG_SYS_SDRAM_BASE0 0x00000000
74 #define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
76 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
77 #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
79 #define CONFIG_SYS_MONITOR_LEN 0x20000
82 * For booting Linux, the board info and command line data
83 * have to be in the first 8 MB of memory, since this is
84 * the maximum mapped by the Linux kernel during initialization ??
86 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
88 /*-----------------------------------------------------------------------
91 #define CONFIG_FLASH_SHOW_PROGRESS 45
93 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
94 #define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
95 #define CONFIG_SYS_INT_FLASH_ENABLE 0x21
97 #define CONFIG_SYS_MAX_FLASH_SECT 128
98 #define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
100 #define CONFIG_SYS_FLASH_SIZE 16*1024*1024
102 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
104 /*-----------------------------------------------------------------------
105 * Cache Configuration
108 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
109 CONFIG_SYS_INIT_RAM_SIZE - 8)
110 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
111 CONFIG_SYS_INIT_RAM_SIZE - 4)
112 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
113 #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
114 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
115 CF_ACR_EN | CF_ACR_SM_ALL)
116 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
117 CF_CACR_CEIB | CF_CACR_DBWE | \
120 /*-----------------------------------------------------------------------
121 * Memory bank definitions
124 #define CONFIG_SYS_CS0_BASE 0xFF000000
125 #define CONFIG_SYS_CS0_CTRL 0x00001980
126 #define CONFIG_SYS_CS0_MASK 0x00FF0001
128 #define CONFIG_SYS_CS2_BASE 0xE0000000
129 #define CONFIG_SYS_CS2_CTRL 0x00001980
130 #define CONFIG_SYS_CS2_MASK 0x000F0001
132 #define CONFIG_SYS_CS3_BASE 0xE0100000
133 #define CONFIG_SYS_CS3_CTRL 0x00001980
134 #define CONFIG_SYS_CS3_MASK 0x000F0001
136 /*-----------------------------------------------------------------------
139 #define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
140 #define CONFIG_SYS_PADDR 0x0000000
141 #define CONFIG_SYS_PADAT 0x0000000
143 #define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
144 #define CONFIG_SYS_PBDDR 0x0000000
145 #define CONFIG_SYS_PBDAT 0x0000000
147 #define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
148 #define CONFIG_SYS_PCDDR 0x0000000
149 #define CONFIG_SYS_PCDAT 0x0000000
151 #define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
152 #define CONFIG_SYS_PCDDR 0x0000000
153 #define CONFIG_SYS_PCDAT 0x0000000
155 #define CONFIG_SYS_PASPAR 0x0F0F
156 #define CONFIG_SYS_PEHLPAR 0xC0
157 #define CONFIG_SYS_PUAPAR 0x0F
158 #define CONFIG_SYS_DDRUA 0x05
159 #define CONFIG_SYS_PJPAR 0xFF
161 /*-----------------------------------------------------------------------
165 #ifdef CONFIG_CMD_DATE
166 #define CONFIG_RTC_DS1338
167 #define CONFIG_I2C_RTC_ADDR 0x68
170 /*-----------------------------------------------------------------------
171 * VIDEO configuration
174 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
175 #define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
176 #define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
178 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
179 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
180 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
182 #define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
183 #define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
184 #define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
186 #define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
187 #define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
188 #define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
190 #define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
191 #define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
192 #define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
194 #endif /* _CONFIG_M5282EVB_H */
195 /*---------------------------------------------------------------------*/