1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
5 * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
8 #ifndef _CONFIG_EB_CPU5282_H_
9 #define _CONFIG_EB_CPU5282_H_
11 /*----------------------------------------------------------------------*
12 * High Level Configuration Options (easy to change) *
13 *----------------------------------------------------------------------*/
15 #define CONFIG_SYS_UART_PORT (0)
17 #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
19 /*----------------------------------------------------------------------*
21 *----------------------------------------------------------------------*/
23 #define STATUS_LED_ACTIVE 0
25 /*----------------------------------------------------------------------*
26 * Configuration for environment *
27 * Environment is in the second sector of the first 256k of flash *
28 *----------------------------------------------------------------------*/
30 /*#define CONFIG_SYS_DRAM_TEST 1 */
31 #undef CONFIG_SYS_DRAM_TEST
33 /*----------------------------------------------------------------------*
34 * Clock and PLL Configuration *
35 *----------------------------------------------------------------------*/
36 #define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
38 /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
40 #define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
41 #define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
43 /*----------------------------------------------------------------------*
45 *----------------------------------------------------------------------*/
48 #define CONFIG_OVERWRITE_ETHADDR_ONCE
51 /*-------------------------------------------------------------------------
52 * Low Level Configuration Settings
53 * (address mappings, register initial values, etc.)
54 * You should know what you are doing if you make changes here.
55 *-----------------------------------------------------------------------*/
57 #define CONFIG_SYS_MBAR 0x40000000
59 /*-----------------------------------------------------------------------
60 * Definitions for initial stack pointer and data area (in DPRAM)
61 *-----------------------------------------------------------------------*/
63 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
64 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000
66 /*-----------------------------------------------------------------------
67 * Start addresses for the final memory configuration
68 * (Set up by the startup code)
69 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
71 #define CONFIG_SYS_SDRAM_BASE0 0x00000000
72 #define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
74 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
75 #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
78 * For booting Linux, the board info and command line data
79 * have to be in the first 8 MB of memory, since this is
80 * the maximum mapped by the Linux kernel during initialization ??
82 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
84 /*-----------------------------------------------------------------------
87 #define CONFIG_FLASH_SHOW_PROGRESS 45
89 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
90 #define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
91 #define CONFIG_SYS_INT_FLASH_ENABLE 0x21
93 #define CONFIG_SYS_FLASH_SIZE 16*1024*1024
95 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
97 /*-----------------------------------------------------------------------
101 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
102 CONFIG_SYS_INIT_RAM_SIZE - 8)
103 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
104 CONFIG_SYS_INIT_RAM_SIZE - 4)
105 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
106 #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
107 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
108 CF_ACR_EN | CF_ACR_SM_ALL)
109 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
110 CF_CACR_CEIB | CF_CACR_DBWE | \
113 /*-----------------------------------------------------------------------
114 * Memory bank definitions
117 #define CONFIG_SYS_CS0_BASE 0xFF000000
118 #define CONFIG_SYS_CS0_CTRL 0x00001980
119 #define CONFIG_SYS_CS0_MASK 0x00FF0001
121 #define CONFIG_SYS_CS2_BASE 0xE0000000
122 #define CONFIG_SYS_CS2_CTRL 0x00001980
123 #define CONFIG_SYS_CS2_MASK 0x000F0001
125 #define CONFIG_SYS_CS3_BASE 0xE0100000
126 #define CONFIG_SYS_CS3_CTRL 0x00001980
127 #define CONFIG_SYS_CS3_MASK 0x000F0001
129 /*-----------------------------------------------------------------------
132 #define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
133 #define CONFIG_SYS_PADDR 0x0000000
134 #define CONFIG_SYS_PADAT 0x0000000
136 #define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
137 #define CONFIG_SYS_PBDDR 0x0000000
138 #define CONFIG_SYS_PBDAT 0x0000000
140 #define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
141 #define CONFIG_SYS_PCDDR 0x0000000
142 #define CONFIG_SYS_PCDAT 0x0000000
144 #define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
145 #define CONFIG_SYS_PCDDR 0x0000000
146 #define CONFIG_SYS_PCDAT 0x0000000
148 #define CONFIG_SYS_PASPAR 0x0F0F
149 #define CONFIG_SYS_PEHLPAR 0xC0
150 #define CONFIG_SYS_PUAPAR 0x0F
151 #define CONFIG_SYS_DDRUA 0x05
152 #define CONFIG_SYS_PJPAR 0xFF
154 /*-----------------------------------------------------------------------
158 #ifdef CONFIG_CMD_DATE
159 #define CONFIG_RTC_DS1338
160 #define CONFIG_I2C_RTC_ADDR 0x68
163 /*-----------------------------------------------------------------------
164 * VIDEO configuration
167 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
168 #define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
169 #define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
171 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
172 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
173 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
175 #define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
176 #define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
177 #define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
179 #define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
180 #define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
181 #define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
183 #define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
184 #define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
185 #define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
187 #endif /* _CONFIG_M5282EVB_H */
188 /*---------------------------------------------------------------------*/