Merge git://git.denx.de/u-boot-i2c
[platform/kernel/u-boot.git] / include / configs / ea20.h
1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 /*
15  * Board
16  */
17 #define CONFIG_DRIVER_TI_EMAC
18 #define CONFIG_USE_SPIFLASH
19 #define CONFIG_SYS_USE_NAND
20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
22 #define CONFIG_PREBOOT
23
24 /*
25  * SoC Configuration
26  */
27 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
28 #define CONFIG_SYS_OSCIN_FREQ           24000000
29 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
30 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
31 #define CONFIG_SKIP_LOWLEVEL_INIT
32 #define CONFIG_DA8XX_GPIO
33
34 /*
35  * Memory Info
36  */
37 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 4*1024*1024) /* malloc() len */
38 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
39 #define PHYS_SDRAM_1_SIZE       (64 << 20) /* SDRAM size 64MB */
40 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
41
42 /* memtest start addr */
43 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
44
45 /* memtest will be run on 16MB */
46 #define CONFIG_SYS_MEMTEST_END  (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
47
48 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
49
50 /*
51  * Serial Driver info
52  */
53 #define CONFIG_SYS_NS16550_SERIAL
54 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
55 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
56 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
57
58 #define CONFIG_SPI
59 #define CONFIG_SYS_SPI_BASE             DAVINCI_SPI1_BASE
60 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
61 #define CONFIG_SF_DEFAULT_SPEED         30000000
62 #define CONFIG_ENV_SPI_MAX_HZ   CONFIG_SF_DEFAULT_SPEED
63
64 /*
65  * I2C Configuration
66  */
67 #define CONFIG_SYS_I2C
68 #define CONFIG_SYS_I2C_DAVINCI
69 #define CONFIG_SYS_DAVINCI_I2C_SPEED            100000
70 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
71
72 /*
73  * Network & Ethernet Configuration
74  */
75 #ifdef CONFIG_DRIVER_TI_EMAC
76 #define CONFIG_MII
77 #define CONFIG_BOOTP_DNS2
78 #define CONFIG_BOOTP_SEND_HOSTNAME
79 #define CONFIG_NET_RETRY_COUNT  10
80 #endif
81
82 #ifdef CONFIG_USE_SPIFLASH
83 #define CONFIG_ENV_SIZE                 (8 << 10)
84 #define CONFIG_ENV_OFFSET               0x80000
85 #define CONFIG_ENV_SECT_SIZE            (64 << 10)
86 #endif
87
88 #if defined(CONFIG_VIDEO)
89 #define CONFIG_VIDEO_DA8XX
90 #define CONFIG_SPLASH_SCREEN_ALIGN
91 #define CONFIG_VIDEO_LOGO
92 #define CONFIG_VIDEO_BMP_RLE8
93 #define CONFIG_VIDEO_BMP_LOGO
94 #endif
95
96 /*
97  * U-Boot general configuration
98  */
99 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
100 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
101 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
102 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
103 #define CONFIG_MX_CYCLIC
104
105 /*
106  * Linux Information
107  */
108 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
109 #define CONFIG_CMDLINE_TAG
110 #define CONFIG_SETUP_MEMORY_TAGS
111
112 #ifdef CONFIG_CMD_BDI
113 #define CONFIG_CLOCKS
114 #endif
115
116 #ifndef CONFIG_DRIVER_TI_EMAC
117 #endif
118
119 /* NAND Setup */
120 #ifdef CONFIG_SYS_USE_NAND
121 #define CONFIG_MTD_DEVICE
122 #define CONFIG_MTD_PARTITIONS
123
124 #define CONFIG_NAND_DAVINCI
125 #define CONFIG_SYS_NAND_PAGE_2K
126 #define CONFIG_SYS_NAND_NO_SUBPAGE
127 #define CONFIG_SYS_NAND_CS              2
128 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
129 #undef CONFIG_SYS_NAND_HW_ECC
130 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
131 #define CONFIG_SYS_NAND_USE_FLASH_BBT
132 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
133 #endif
134
135 /* SPI Flash */
136 #ifdef CONFIG_USE_SPIFLASH
137 #endif
138
139 #if !defined(CONFIG_SYS_USE_NAND) && \
140         !defined(CONFIG_USE_NOR) && \
141         !defined(CONFIG_USE_SPIFLASH)
142 #define CONFIG_ENV_SIZE         (16 << 10)
143 #endif
144
145 /* additions for new relocation code, must added to all boards */
146 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
147 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
148                                         GENERATED_GBL_DATA_SIZE)
149 /*
150  * Default environment and default scripts
151  * to update uboot and load kernel
152  */
153
154 #define CONFIG_HOSTNAME ea20
155 #define CONFIG_EXTRA_ENV_SETTINGS                               \
156         "as=3\0"                                                        \
157         "netdev=eth0\0"                                         \
158         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
159                 "nfsroot=${serverip}:${rootpath}\0"                     \
160         "rfsbargs=setenv bootargs root=/dev/nfs rw "                    \
161         "nfsroot=${serverip}:${rfsbpath}\0"                             \
162         "testrfsargs=setenv bootargs root=/dev/nfs rw "         \
163         "nfsroot=${serverip}:${testrfspath}\0"                          \
164         "ramargs=setenv bootargs root=/dev/ram rw initrd="              \
165         "0x${ramdisk_addr_r},4M\0"                                      \
166         "mtdids=nand0=davinci_nand.0\0"                         \
167         "serverip=192.168.5.249\0"                                      \
168         "ipaddr=192.168.5.248\0"                                        \
169         "rootpath=/opt/eldk/arm\0"                                      \
170         "splashpos=230,180\0"                                           \
171         "testrfspath=/opt/eldk/test_arm\0"                              \
172         "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "    \
173         "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
174         "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "  \
175         "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
176         "addip_sta=setenv bootargs ${bootargs} "                        \
177                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
178                 ":${hostname}:${netdev}:off panic=1\0"                  \
179         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
180         "addip=if test -n ${ipdyn};then run addip_dyn;"         \
181                 "else run addip_sta;fi\0"                               \
182         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
183         "addtty=setenv bootargs ${bootargs}"                            \
184                 " console=${consoledev},${baudrate}n8\0"                \
185         "addmisc=setenv bootargs ${bootargs} ${misc}\0"         \
186         "addmem=setenv bootargs ${bootargs} mem=${memory}\0"            \
187         "consoledev=ttyS0\0"                                            \
188         "loadaddr=c0000014\0"                                           \
189         "memory=32M\0"                                                  \
190         "kernel_addr_r=c0700000\0"                                      \
191         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
192         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
193         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"    \
194         "flash_self=run ramargs addip addtty addmtd addmisc addmem;"    \
195                         "bootm ${kernel_addr_r}\0"                      \
196         "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"     \
197                 "bootm ${kernel_addr}\0"                                \
198         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
199                 "run nfsargs addip addtty addmtd addmisc addmem;"       \
200                 "bootm ${kernel_addr_r}\0"                              \
201         "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "                  \
202                 "run rfsbargs addip addtty addmtd addmisc addmem; "     \
203                 "bootm ${kernel_addr_r}\0"                              \
204         "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "               \
205                 "run testrfsargs addip addtty addmtd addmisc addmem; "  \
206                 "bootm ${kernel_addr_r}\0"                              \
207         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
208                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
209         "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \
210                 "ubifsload ${kernel_addr_r} /boot/uImage;"              \
211                 "ubifsumount; run nandargs addip addtty "               \
212                 "addmtd addmisc addmem;clrlogo;"                        \
213                 "bootm ${kernel_addr_r}\0"                              \
214         "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"       \
215                 "ubifsload ${kernel_addr_r} /boot/uImage;"              \
216                 "ubifsumount; run nandrwargs addip addtty "             \
217                 "addmtd addmisc addmem;clrlogo;"                        \
218                 "bootm ${kernel_addr_r}\0"                              \
219         "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"  \
220                 " addip addtty addmtd addmisc addmem;"                  \
221                 "clrlogo;bootm ${kernel_addr_r}\0"                      \
222         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
223         "load_magic=if sf probe 0;then sf "                             \
224                 "read c0000000 0x10000 0x60000;fi\0"                    \
225         "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \
226                 "if ubifsload c0000014 /boot/u-boot.bin;"               \
227                 "then mw c0000008 ${filesize};else echo Error reading"  \
228                 " u-boot from nand!;fi\0"                               \
229         "load_net=if sf probe 0;then sf read c0000000 0x10000 " \
230                 "0x60000;tftp c0000014 ${u-boot};"                      \
231                 "mw c0000008 ${filesize};fi\0"                          \
232         "upd=if sf probe 0;then sf erase 10000 60000;"                  \
233                 "sf write c0000000 10000 60000;fi\0"                    \
234         "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "       \
235                 "sf erase 0 10000;"                                     \
236                 "sf write 0xc0700000 0 ${filesize};fi\0"                \
237         "ubootupd_net=if run load_net;then echo Updating u-boot;"       \
238                 "if run upd; then echo U-Boot updated;"         \
239                         "else echo Error updating u-boot !;"            \
240                         "echo Board without bootloader !!;"             \
241                 "fi;"                                                   \
242                 "else echo U-Boot not downloaded..exiting;fi\0" \
243         "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"    \
244         "bootcmd=run net_testrfs\0"
245
246 #include <asm/arch/hardware.h>
247
248 #endif /* __CONFIG_H */