include/configs/ea20.h

   1 /*
   2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * Based on davinci_dvevm.h. Original Copyrights follow:
   5  *
   6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * Board
  16  */
  17 #define CONFIG_DRIVER_TI_EMAC
  18 #define CONFIG_USE_SPIFLASH
  19 #define CONFIG_SYS_USE_NAND
  20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
  21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
  22 #define CONFIG_PREBOOT
  23
  24 /*
  25  * SoC Configuration
  26  */
  27 #define CONFIG_MACH_DAVINCI_DA850_EVM
  28 #define CONFIG_SOC_DA8XX                /* TI DA8xx SoC */
  29 #define CONFIG_SOC_DA850                /* TI DA850 SoC */
  30 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  31 #define CONFIG_SYS_OSCIN_FREQ           24000000
  32 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  33 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  34 #define CONFIG_SKIP_LOWLEVEL_INIT
  35 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  36 #define CONFIG_DA8XX_GPIO
  37
  38 /*
  39  * Memory Info
  40  */
  41 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 4*1024*1024) /* malloc() len */
  42 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  43 #define PHYS_SDRAM_1_SIZE       (64 << 20) /* SDRAM size 64MB */
  44 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  45
  46 /* memtest start addr */
  47 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  48
  49 /* memtest will be run on 16MB */
  50 #define CONFIG_SYS_MEMTEST_END  (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
  51
  52 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  53
  54 /*
  55  * Serial Driver info
  56  */
  57 #define CONFIG_SYS_NS16550_SERIAL
  58 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
  59 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
  60 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
  61 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
  62
  63 #define CONFIG_SPI
  64 #define CONFIG_DAVINCI_SPI
  65 #define CONFIG_SYS_SPI_BASE             DAVINCI_SPI1_BASE
  66 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
  67 #define CONFIG_SF_DEFAULT_SPEED         30000000
  68 #define CONFIG_ENV_SPI_MAX_HZ   CONFIG_SF_DEFAULT_SPEED
  69
  70 /*
  71  * I2C Configuration
  72  */
  73 #define CONFIG_SYS_I2C
  74 #define CONFIG_SYS_I2C_DAVINCI
  75 #define CONFIG_SYS_DAVINCI_I2C_SPEED            100000
  76 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
  77
  78 /*
  79  * Network & Ethernet Configuration
  80  */
  81 #ifdef CONFIG_DRIVER_TI_EMAC
  82 #define CONFIG_EMAC_MDIO_PHY_NUM        0
  83 #define CONFIG_MII
  84 #define CONFIG_BOOTP_DNS
  85 #define CONFIG_BOOTP_DNS2
  86 #define CONFIG_BOOTP_SEND_HOSTNAME
  87 #define CONFIG_NET_RETRY_COUNT  10
  88 #endif
  89
  90 #ifdef CONFIG_USE_SPIFLASH
  91 #undef CONFIG_ENV_IS_IN_FLASH
  92 #undef CONFIG_ENV_IS_IN_NAND
  93 #define CONFIG_ENV_IS_IN_SPI_FLASH
  94 #define CONFIG_ENV_SIZE                 (8 << 10)
  95 #define CONFIG_ENV_OFFSET               0x80000
  96 #define CONFIG_ENV_SECT_SIZE            (64 << 10)
  97 #endif
  98
  99 #if defined(CONFIG_VIDEO)
 100 #define CONFIG_VIDEO_DA8XX
 101 #define CONFIG_SPLASH_SCREEN_ALIGN
 102 #define CONFIG_VIDEO_LOGO
 103 #define CONFIG_VIDEO_BMP_RLE8
 104 #define CONFIG_VIDEO_BMP_LOGO
 105 #endif
 106
 107 /*
 108  * U-Boot general configuration
 109  */
 110 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 111 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 112 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 113 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 114 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 115 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 116 #define CONFIG_AUTO_COMPLETE
 117 #define CONFIG_CMDLINE_EDITING
 118 #define CONFIG_SYS_LONGHELP
 119 #define CONFIG_CRC32_VERIFY
 120 #define CONFIG_MX_CYCLIC
 121
 122 /*
 123  * Linux Information
 124  */
 125 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 126 #define CONFIG_CMDLINE_TAG
 127 #define CONFIG_SETUP_MEMORY_TAGS
 128
 129 /*
 130  * U-Boot commands
 131  */
 132 #define CONFIG_CMD_ENV
 133 #define CONFIG_CMD_SAVES
 134
 135 #ifdef CONFIG_CMD_BDI
 136 #define CONFIG_CLOCKS
 137 #endif
 138
 139 #ifndef CONFIG_DRIVER_TI_EMAC
 140 #endif
 141
 142 /* NAND Setup */
 143 #ifdef CONFIG_SYS_USE_NAND
 144 #define CONFIG_CMD_NAND
 145
 146 #define CONFIG_CMD_MTDPARTS
 147 #define CONFIG_MTD_DEVICE
 148 #define CONFIG_MTD_PARTITIONS
 149 #define CONFIG_LZO
 150 #define CONFIG_RBTREE
 151 #define CONFIG_CMD_UBIFS
 152
 153 #define CONFIG_NAND_DAVINCI
 154 #define CONFIG_SYS_NAND_PAGE_2K
 155 #define CONFIG_SYS_NAND_NO_SUBPAGE
 156 #define CONFIG_SYS_NAND_CS              2
 157 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 158 #undef CONFIG_SYS_NAND_HW_ECC
 159 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 160 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 161 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 162 #endif
 163
 164 /* SPI Flash */
 165 #ifdef CONFIG_USE_SPIFLASH
 166 #endif
 167
 168 #if !defined(CONFIG_SYS_USE_NAND) && \
 169         !defined(CONFIG_USE_NOR) && \
 170         !defined(CONFIG_USE_SPIFLASH)
 171 #define CONFIG_ENV_IS_NOWHERE
 172 #define CONFIG_ENV_SIZE         (16 << 10)
 173 #undef CONFIG_CMD_ENV
 174 #endif
 175
 176 /* additions for new relocation code, must added to all boards */
 177 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 178 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 179                                         GENERATED_GBL_DATA_SIZE)
 180 /*
 181  * Default environment and default scripts
 182  * to update uboot and load kernel
 183  */
 184
 185 #define CONFIG_HOSTNAME ea20
 186 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 187         "as=3\0"                                                        \
 188         "netdev=eth0\0"                                         \
 189         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 190                 "nfsroot=${serverip}:${rootpath}\0"                     \
 191         "rfsbargs=setenv bootargs root=/dev/nfs rw "                    \
 192         "nfsroot=${serverip}:${rfsbpath}\0"                             \
 193         "testrfsargs=setenv bootargs root=/dev/nfs rw "         \
 194         "nfsroot=${serverip}:${testrfspath}\0"                          \
 195         "ramargs=setenv bootargs root=/dev/ram rw initrd="              \
 196         "0x${ramdisk_addr_r},4M\0"                                      \
 197         "mtdids=nand0=davinci_nand.0\0"                         \
 198         "serverip=192.168.5.249\0"                                      \
 199         "ipaddr=192.168.5.248\0"                                        \
 200         "rootpath=/opt/eldk/arm\0"                                      \
 201         "splashpos=230,180\0"                                           \
 202         "testrfspath=/opt/eldk/test_arm\0"                              \
 203         "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "    \
 204         "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
 205         "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "  \
 206         "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
 207         "addip_sta=setenv bootargs ${bootargs} "                        \
 208                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 209                 ":${hostname}:${netdev}:off panic=1\0"                  \
 210         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 211         "addip=if test -n ${ipdyn};then run addip_dyn;"         \
 212                 "else run addip_sta;fi\0"                               \
 213         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 214         "addtty=setenv bootargs ${bootargs}"                            \
 215                 " console=${consoledev},${baudrate}n8\0"                \
 216         "addmisc=setenv bootargs ${bootargs} ${misc}\0"         \
 217         "addmem=setenv bootargs ${bootargs} mem=${memory}\0"            \
 218         "consoledev=ttyS0\0"                                            \
 219         "loadaddr=c0000014\0"                                           \
 220         "memory=32M\0"                                                  \
 221         "kernel_addr_r=c0700000\0"                                      \
 222         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 223         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 224         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"    \
 225         "flash_self=run ramargs addip addtty addmtd addmisc addmem;"    \
 226                         "bootm ${kernel_addr_r}\0"                      \
 227         "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"     \
 228                 "bootm ${kernel_addr}\0"                                \
 229         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 230                 "run nfsargs addip addtty addmtd addmisc addmem;"       \
 231                 "bootm ${kernel_addr_r}\0"                              \
 232         "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "                  \
 233                 "run rfsbargs addip addtty addmtd addmisc addmem; "     \
 234                 "bootm ${kernel_addr_r}\0"                              \
 235         "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "               \
 236                 "run testrfsargs addip addtty addmtd addmisc addmem; "  \
 237                 "bootm ${kernel_addr_r}\0"                              \
 238         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 239                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 240         "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \
 241                 "ubifsload ${kernel_addr_r} /boot/uImage;"              \
 242                 "ubifsumount; run nandargs addip addtty "               \
 243                 "addmtd addmisc addmem;clrlogo;"                        \
 244                 "bootm ${kernel_addr_r}\0"                              \
 245         "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"       \
 246                 "ubifsload ${kernel_addr_r} /boot/uImage;"              \
 247                 "ubifsumount; run nandrwargs addip addtty "             \
 248                 "addmtd addmisc addmem;clrlogo;"                        \
 249                 "bootm ${kernel_addr_r}\0"                              \
 250         "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"  \
 251                 " addip addtty addmtd addmisc addmem;"                  \
 252                 "clrlogo;bootm ${kernel_addr_r}\0"                      \
 253         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 254         "load_magic=if sf probe 0;then sf "                             \
 255                 "read c0000000 0x10000 0x60000;fi\0"                    \
 256         "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \
 257                 "if ubifsload c0000014 /boot/u-boot.bin;"               \
 258                 "then mw c0000008 ${filesize};else echo Error reading"  \
 259                 " u-boot from nand!;fi\0"                               \
 260         "load_net=if sf probe 0;then sf read c0000000 0x10000 " \
 261                 "0x60000;tftp c0000014 ${u-boot};"                      \
 262                 "mw c0000008 ${filesize};fi\0"                          \
 263         "upd=if sf probe 0;then sf erase 10000 60000;"                  \
 264                 "sf write c0000000 10000 60000;fi\0"                    \
 265         "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "       \
 266                 "sf erase 0 10000;"                                     \
 267                 "sf write 0xc0700000 0 ${filesize};fi\0"                \
 268         "ubootupd_net=if run load_net;then echo Updating u-boot;"       \
 269                 "if run upd; then echo U-Boot updated;"         \
 270                         "else echo Error updating u-boot !;"            \
 271                         "echo Board without bootloader !!;"             \
 272                 "fi;"                                                   \
 273                 "else echo U-Boot not downloaded..exiting;fi\0" \
 274         "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"    \
 275         "bootcmd=run net_testrfs\0"
 276
 277 #endif /* __CONFIG_H */