Merge branch 'master' of git://git.denx.de/u-boot-arm
[platform/kernel/u-boot.git] / include / configs / dxr2.h
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_DXR2_H
14 #define __CONFIG_DXR2_H
15
16 #define CONFIG_SIEMENS_DXR2
17 #define MACH_TYPE_DXR2                  4315
18 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_DXR2
19
20 #include "siemens-am33x-common.h"
21
22 #define CONFIG_SYS_MPUCLK       275
23 #define DXR2_IOCTRL_VAL 0x18b
24 #define DDR_PLL_FREQ    303
25 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
26
27 #define BOARD_DFU_BUTTON_GPIO   27
28 #define BOARD_DFU_BUTTON_LED    64
29 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
30
31 #undef CONFIG_DOS_PARTITION
32 #undef CONFIG_CMD_FAT
33
34
35  /* Physical Memory Map */
36 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
37
38 /* I2C Configuration */
39 #define CONFIG_SYS_I2C_SPEED            100000
40
41 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
42 #define EEPROM_ADDR_DDR3 0x90
43 #define EEPROM_ADDR_CHIP 0x120
44
45 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
46
47 #undef CONFIG_SPL_NET_SUPPORT
48 #undef CONFIG_SPL_NET_VCI_STRING
49 #undef CONFIG_SPL_ETH_SUPPORT
50
51 #undef CONFIG_MII
52 #undef CONFIG_PHY_GIGE
53 #define CONFIG_PHY_SMSC
54
55 #define CONFIG_FACTORYSET
56
57 /* Watchdog */
58 #define CONFIG_OMAP_WATCHDOG
59
60 #ifndef CONFIG_SPL_BUILD
61
62 /* Default env settings */
63 #define CONFIG_EXTRA_ENV_SETTINGS \
64         "hostname=dxr2\0" \
65         "nand_img_size=0x400000\0" \
66         "optargs=\0" \
67         CONFIG_COMMON_ENV_SETTINGS
68
69 #ifndef CONFIG_RESTORE_FLASH
70 /* set to negative value for no autoboot */
71 #define CONFIG_BOOTDELAY                3
72
73 #define CONFIG_BOOTCOMMAND \
74 "if dfubutton; then " \
75         "run dfu_start; " \
76         "reset; " \
77 "fi;" \
78 "run nand_boot;" \
79 "reset;"
80
81
82 #else
83 #define CONFIG_BOOTDELAY                0
84
85 #define CONFIG_BOOTCOMMAND                      \
86         "setenv autoload no; "                  \
87         "dhcp; "                                \
88         "if tftp 80000000 debrick.scr; then "   \
89                 "source 80000000; "             \
90         "fi"
91 #endif
92 #endif  /* CONFIG_SPL_BUILD */
93 #endif  /* ! __CONFIG_DXR2_H */