2 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_SYNOLOGY_DS414_H
8 #define _CONFIG_SYNOLOGY_DS414_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
17 * for DDR ECC byte filling in the SPL before loading the main
20 #define CONFIG_SYS_TEXT_BASE 0x00800000
21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
24 * Commands configuration
28 #define CONFIG_SYS_I2C
29 #define CONFIG_SYS_I2C_MVTWSI
30 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
31 #define CONFIG_SYS_I2C_SLAVE 0x0
32 #define CONFIG_SYS_I2C_SPEED 100000
34 /* SPI NOR flash default params, used by sf commands */
35 #define CONFIG_SF_DEFAULT_SPEED 1000000
36 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
38 /* Environment in SPI NOR flash */
39 #define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */
40 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
41 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
43 #define CONFIG_PHY_MARVELL /* there is a marvell phy */
44 #define CONFIG_PHY_ADDR { 0x1, 0x0 }
45 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
47 #define CONFIG_SYS_ALT_MEMTEST
50 #ifndef CONFIG_SPL_BUILD
51 #define CONFIG_PCI_MVEBU
52 #define CONFIG_PCI_SCAN_SHOW
55 /* USB/EHCI/XHCI configuration */
57 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
59 /* FIXME: broken XHCI support
60 * Below defines should enable support for the two rear USB3 ports. Sadly, this
61 * does not work because:
62 * - xhci-pci seems to not support DM_USB, so with that enabled it is not
64 * - USB init fails, controller does not respond in time */
66 #if !defined(CONFIG_USB_XHCI_HCD)
67 #define CONFIG_EHCI_IS_TDI
70 /* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
71 #define CONFIG_SYS_MVFS
74 * mv-common.h should be defined after CMD configs since it used them
75 * to enable certain macros
77 #include "mv-common.h"
80 * Memory layout while starting into the bin_hdr via the
83 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
84 * 0x4000.4030 bin_hdr start address
85 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
86 * 0x4007.fffc BootROM stack top
88 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
89 * L2 cache thus cannot be used.
94 #define CONFIG_SPL_FRAMEWORK
95 #define CONFIG_SPL_TEXT_BASE 0x40004030
96 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
98 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
99 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
101 #ifdef CONFIG_SPL_BUILD
102 #define CONFIG_SYS_MALLOC_SIMPLE
105 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
106 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
108 /* SPL related SPI defines */
109 #define CONFIG_SPL_SPI_LOAD
110 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
112 /* DS414 bus width is 32bits */
113 #define CONFIG_DDR_32BIT
115 /* Use random ethernet address if not configured */
116 #define CONFIG_LIB_RAND
117 #define CONFIG_NET_RANDOM_ETHADDR
119 /* Default Environment */
120 #define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm"
121 #define CONFIG_LOADADDR 0x80000
122 #undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */
123 #define CONFIG_PREBOOT "usb start; sf probe"
125 #endif /* _CONFIG_SYNOLOGY_DS414_H */