1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
6 #ifndef _CONFIG_SYNOLOGY_DS414_H
7 #define _CONFIG_SYNOLOGY_DS414_H
10 * High Level Configuration Options (easy to change)
14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
15 * for DDR ECC byte filling in the SPL before loading the main
20 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
23 #ifndef CONFIG_SPL_BUILD
24 #define CONFIG_PCI_SCAN_SHOW
28 * mv-common.h should be defined after CMD configs since it used them
29 * to enable certain macros
31 #include "mv-common.h"
34 * Memory layout while starting into the bin_hdr via the
37 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
38 * 0x4000.4030 bin_hdr start address
39 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
40 * 0x4007.fffc BootROM stack top
42 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
43 * L2 cache thus cannot be used.
49 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
51 #ifdef CONFIG_SPL_BUILD
52 #define CONFIG_SYS_MALLOC_SIMPLE
55 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
56 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
58 /* Default Environment */
60 #define CONFIG_EXTRA_ENV_SETTINGS \
61 "initrd_high=0xffffffff\0" \
62 "ramdisk_addr_r=0x8000000\0" \
63 "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \
64 "ethmtu=1500\0eth1mtu=1500\0" \
65 "update_uboot=sf probe; dhcp; " \
66 "mw.b ${loadaddr} 0x0 0xd0000; " \
67 "tftpboot ${loadaddr} u-boot-spl.kwb; " \
68 "sf update ${loadaddr} 0x0 0xd0000\0"
71 /* increase autoneg timeout, my NIC sucks */
72 #define PHY_ANEG_TIMEOUT 16000
74 #endif /* _CONFIG_SYNOLOGY_DS414_H */