1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
6 #ifndef _CONFIG_SYNOLOGY_DS414_H
7 #define _CONFIG_SYNOLOGY_DS414_H
10 * High Level Configuration Options (easy to change)
14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
15 * for DDR ECC byte filling in the SPL before loading the main
20 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
23 #define CONFIG_PCI_SCAN_SHOW
26 * mv-common.h should be defined after CMD configs since it used them
27 * to enable certain macros
29 #include "mv-common.h"
32 * Memory layout while starting into the bin_hdr via the
35 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
36 * 0x4000.4030 bin_hdr start address
37 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
38 * 0x4007.fffc BootROM stack top
40 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
41 * L2 cache thus cannot be used.
47 /* Default Environment */
49 #define CONFIG_EXTRA_ENV_SETTINGS \
50 "initrd_high=0xffffffff\0" \
51 "ramdisk_addr_r=0x8000000\0" \
52 "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \
53 "ethmtu=1500\0eth1mtu=1500\0" \
54 "update_uboot=sf probe; dhcp; " \
55 "mw.b ${loadaddr} 0x0 0xd0000; " \
56 "tftpboot ${loadaddr} u-boot-spl.kwb; " \
57 "sf update ${loadaddr} 0x0 0xd0000\0"
60 /* increase autoneg timeout, my NIC sucks */
61 #define PHY_ANEG_TIMEOUT 16000
63 #endif /* _CONFIG_SYNOLOGY_DS414_H */