1 /* SPDX-License-Identifier: GPL-2.0+ */
4 * Jason Cooper <u-boot@lakedaemon.net>
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Siddarth Gore <gores@marvell.com>
11 #ifndef _CONFIG_DREAMPLUG_H
12 #define _CONFIG_DREAMPLUG_H
15 * High Level Configuration Options (easy to change)
17 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
18 #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
21 * Commands configuration
25 * mv-plug-common.h should be defined after CMD configs since it used them
26 * to enable certain macros
28 #include "mv-plug-common.h"
31 * Environment variables configurations
33 #ifdef CONFIG_SPI_FLASH
34 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
38 * max 4k env size is enough, but in case of nand
39 * it has to be rounded to sector size
41 #define CONFIG_ENV_SIZE 0x1000 /* 4k */
42 #define CONFIG_ENV_ADDR 0x100000
43 #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
46 * Default environment variables
48 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
49 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
50 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
51 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
54 #define CONFIG_EXTRA_ENV_SETTINGS \
55 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
56 "x_bootcmd_usb=usb start\0" \
57 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
58 "x_bootargs=console=ttyS0,115200\0" \
59 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
62 * Ethernet Driver configuration
65 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
66 #define CONFIG_PHY_BASE_ADR 0
67 #endif /* CONFIG_CMD_NET */
70 * SATA Driver configuration
72 #ifdef CONFIG_MVSATA_IDE
73 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
74 #endif /*CONFIG_MVSATA_IDE*/
76 #endif /* _CONFIG_DREAMPLUG_H */