1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Board configuration file for Dragonboard 410C
5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
8 #ifndef __CONFIGS_DRAGONBOARD410C_H
9 #define __CONFIGS_DRAGONBOARD410C_H
11 #include <linux/sizes.h>
12 #include <asm/arch/sysmap-apq8016.h>
14 /* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
16 /* Physical Memory Map */
17 #define PHYS_SDRAM_1 0x80000000
18 /* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
19 #define PHYS_SDRAM_1_SIZE SZ_1G
20 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
21 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
22 #define CONFIG_SYS_BOOTM_LEN SZ_64M
26 /* Generic Timer Definitions */
27 #define COUNTER_FREQUENCY 19000000
29 /* Fixup - in init code we switch from device to host mode,
30 * it has to be done after each HCD reset */
31 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
34 #define CONFIG_BOOTP_BOOTFILESIZE
36 #define BOOT_TARGET_DEVICES(func) \
42 #include <config_distro_bootcmd.h>
44 /* Does what recovery does */
45 #define REFLASH(file, part) \
46 "part start mmc 0 "#part" start && "\
47 "part size mmc 0 "#part" size && "\
48 "tftp $loadaddr "#file" && " \
49 "mmc write $loadaddr $start $size && "
51 #define CONFIG_ENV_REFLASH \
55 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
56 "mmc write $loadaddr 0 43 && " \
58 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
59 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
60 REFLASH(dragonboard/rescue/rpm.mbn, 3)\
61 REFLASH(dragonboard/rescue/tz.mbn, 4)\
62 REFLASH(dragonboard/rescue/hyp.mbn, 5)\
63 REFLASH(dragonboard/rescue/sec.dat, 6)\
64 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
65 REFLASH(dragonboard/u-boot.img, 8)\
67 "echo Reflash completed"
70 #define CONFIG_EXTRA_ENV_SETTINGS \
71 "reflash="CONFIG_ENV_REFLASH"\0"\
72 "loadaddr=0x81000000\0" \
73 "initrd_high=0xffffffffffffffff\0" \
74 "linux_image=Image\0" \
75 "kernel_addr_r=0x81000000\0"\
76 "fdtfile=qcom/apq8016-sbc.dtb\0" \
77 "fdt_addr_r=0x83000000\0"\
78 "ramdisk_addr_r=0x84000000\0"\
79 "scriptaddr=0x90000000\0"\
80 "pxefile_addr_r=0x90100000\0"\
83 /* Monitor Command Prompt */
84 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
85 #define CONFIG_SYS_MAXARGS 64 /* max command args */