1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Board configuration file for Dragonboard 410C
5 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
8 #ifndef __CONFIGS_DRAGONBOARD410C_H
9 #define __CONFIGS_DRAGONBOARD410C_H
11 #include <linux/sizes.h>
12 #include <asm/arch/sysmap-apq8016.h>
14 /* Physical Memory Map */
15 #define PHYS_SDRAM_1 0x80000000
16 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
17 #define PHYS_SDRAM_1_SIZE 0x3da00000
18 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
19 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
20 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
21 #define CONFIG_SYS_BOOTM_LEN SZ_64M
25 /* Generic Timer Definitions */
26 #define COUNTER_FREQUENCY 19000000
28 #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
30 /* Fixup - in init code we switch from device to host mode,
31 * it has to be done after each HCD reset */
32 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
35 #define CONFIG_BOOTP_BOOTFILESIZE
37 #define BOOT_TARGET_DEVICES(func) \
43 #include <config_distro_bootcmd.h>
45 /* Does what recovery does */
46 #define REFLASH(file, part) \
47 "part start mmc 0 "#part" start && "\
48 "part size mmc 0 "#part" size && "\
49 "tftp $loadaddr "#file" && " \
50 "mmc write $loadaddr $start $size && "
52 #define CONFIG_ENV_REFLASH \
56 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
57 "mmc write $loadaddr 0 43 && " \
59 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
60 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
61 REFLASH(dragonboard/rescue/rpm.mbn, 3)\
62 REFLASH(dragonboard/rescue/tz.mbn, 4)\
63 REFLASH(dragonboard/rescue/hyp.mbn, 5)\
64 REFLASH(dragonboard/rescue/sec.dat, 6)\
65 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
66 REFLASH(dragonboard/u-boot.img, 8)\
68 "echo Reflash completed"
71 #define CONFIG_EXTRA_ENV_SETTINGS \
72 "reflash="CONFIG_ENV_REFLASH"\0"\
73 "loadaddr=0x81000000\0" \
74 "fdt_high=0xffffffffffffffff\0" \
75 "initrd_high=0xffffffffffffffff\0" \
76 "linux_image=Image\0" \
77 "kernel_addr_r=0x81000000\0"\
78 "fdtfile=qcom/apq8016-sbc.dtb\0" \
79 "fdt_addr_r=0x83000000\0"\
80 "ramdisk_addr_r=0x84000000\0"\
81 "scriptaddr=0x90000000\0"\
82 "pxefile_addr_r=0x90100000\0"\
85 #define CONFIG_ENV_SIZE 0x2000
86 #define CONFIG_SYS_MMC_ENV_DEV 0 /* mmc0 = emmc, mmc1 = sd */
87 #define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */
89 /* Size of malloc() pool */
90 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
92 /* Monitor Command Prompt */
93 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
94 #define CONFIG_SYS_MAXARGS 64 /* max command args */