Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
[platform/kernel/u-boot.git] / include / configs / draco.h
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_DRACO_H
14 #define __CONFIG_DRACO_H
15
16 #define CONFIG_SIEMENS_DRACO
17 #define MACH_TYPE_DRACO                 4314
18 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_DRACO
19
20 #include "siemens-am33x-common.h"
21
22 #define CONFIG_SYS_MPUCLK       275
23 #define DDR_PLL_FREQ    303
24 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
25
26 #define BOARD_DFU_BUTTON_GPIO   27
27 #define BOARD_DFU_BUTTON_LED    64      /* red LED */
28 #define BOARD_STATUS_LED        103     /* green LED */
29 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
30
31 #undef CONFIG_DOS_PARTITION
32 #undef CONFIG_CMD_FAT
33
34
35  /* Physical Memory Map */
36 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
37
38 /* I2C Configuration */
39 #define CONFIG_SYS_I2C_SPEED            100000
40
41 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
42 #define EEPROM_ADDR_DDR3 0x90
43 #define EEPROM_ADDR_CHIP 0x120
44
45 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
46
47 #undef CONFIG_SPL_NET_SUPPORT
48 #undef CONFIG_SPL_NET_VCI_STRING
49 #undef CONFIG_SPL_ETH_SUPPORT
50
51 #undef CONFIG_MII
52 #undef CONFIG_PHY_GIGE
53 #define CONFIG_PHY_SMSC
54
55 #define CONFIG_FACTORYSET
56
57 /* Watchdog */
58 #define CONFIG_OMAP_WATCHDOG
59
60 #ifndef CONFIG_SPL_BUILD
61
62 /* Default env settings */
63 #define CONFIG_EXTRA_ENV_SETTINGS \
64         "nand_img_size=0x400000\0" \
65         "optargs=\0" \
66         CONFIG_COMMON_ENV_SETTINGS
67
68 #ifndef CONFIG_RESTORE_FLASH
69 /* set to negative value for no autoboot */
70 #define CONFIG_BOOTDELAY                3
71
72 #define CONFIG_BOOTCOMMAND \
73 "if dfubutton; then " \
74         "run dfu_start; " \
75         "reset; " \
76 "fi;" \
77 "run nand_boot;" \
78 "reset;"
79
80
81 #else
82 #define CONFIG_BOOTDELAY                0
83
84 #define CONFIG_BOOTCOMMAND                      \
85         "setenv autoload no; "                  \
86         "dhcp; "                                \
87         "if tftp 80000000 debrick.scr; then "   \
88                 "source 80000000; "             \
89         "fi"
90 #endif
91 #endif  /* CONFIG_SPL_BUILD */
92 #endif  /* ! __CONFIG_DRACO_H */