Merge git://www.denx.de/git/u-boot-marvell
[platform/kernel/u-boot.git] / include / configs / draco.h
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_DRACO_H
14 #define __CONFIG_DRACO_H
15
16 #define CONFIG_SIEMENS_DRACO
17 #define MACH_TYPE_DRACO                 4314
18 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_DRACO
19
20 #include "siemens-am33x-common.h"
21
22 #define CONFIG_SYS_MPUCLK       300
23 #define DDR_PLL_FREQ    303
24 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
25
26 #define BOARD_DFU_BUTTON_GPIO   27      /* Use as default */
27 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
28
29 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
30         "button_dfu0=27\0" \
31         "led0=103,1,0\0" \
32         "led1=64,0,1\0"
33
34 #undef CONFIG_DOS_PARTITION
35
36 #define CONFIG_BOARD_LATE_INIT
37
38  /* Physical Memory Map */
39 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
40
41 /* I2C Configuration */
42 #define CONFIG_SYS_I2C_SPEED            100000
43
44 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
45 #define EEPROM_ADDR_DDR3 0x90
46 #define EEPROM_ADDR_CHIP 0x120
47
48 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
49
50 #undef CONFIG_MII
51 #undef CONFIG_PHY_GIGE
52 #define CONFIG_PHY_SMSC
53
54 #define CONFIG_FACTORYSET
55
56 /* Watchdog */
57 #define CONFIG_OMAP_WATCHDOG
58
59 /* Define own nand partitions */
60 #define CONFIG_ENV_OFFSET_REDUND    0x2E0000
61 #define CONFIG_ENV_SIZE_REDUND      0x2000
62 #define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
63
64 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V2
65
66 #ifndef CONFIG_SPL_BUILD
67
68 /* Default env settings */
69 #define CONFIG_EXTRA_ENV_SETTINGS \
70         "hostname=draco\0" \
71         "ubi_off=2048\0"\
72         "nand_img_size=0x400000\0" \
73         "optargs=\0" \
74         "preboot=draco_led 0\0" \
75         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
76         CONFIG_ENV_SETTINGS_V2 \
77         CONFIG_ENV_SETTINGS_NAND_V2
78
79 #ifndef CONFIG_RESTORE_FLASH
80 /* set to negative value for no autoboot */
81
82 #define CONFIG_BOOTCOMMAND \
83 "if dfubutton; then " \
84         "run dfu_start; " \
85         "reset; " \
86 "fi;" \
87 "run nand_boot;" \
88 "run nand_boot_backup;" \
89 "reset;"
90
91 #else
92
93 #define CONFIG_BOOTCOMMAND                      \
94         "setenv autoload no; "                  \
95         "dhcp; "                                \
96         "if tftp 80000000 debrick.scr; then "   \
97                 "source 80000000; "             \
98         "fi"
99 #endif
100 #endif  /* CONFIG_SPL_BUILD */
101 #endif  /* ! __CONFIG_DRACO_H */