Merge git://git.denx.de/u-boot-i2c
[platform/kernel/u-boot.git] / include / configs / draco.h
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_DRACO_H
14 #define __CONFIG_DRACO_H
15
16 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_DRACO
17
18 #include "siemens-am33x-common.h"
19
20 #define DDR_PLL_FREQ    303
21 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
22
23 #define BOARD_DFU_BUTTON_GPIO   27      /* Use as default */
24 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
25
26 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
27         "button_dfu0=27\0" \
28         "led0=103,1,0\0" \
29         "led1=64,0,1\0"
30
31  /* Physical Memory Map */
32 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
33
34 /* I2C Configuration */
35 #define CONFIG_SYS_I2C_SPEED            100000
36
37 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
38 #define EEPROM_ADDR_DDR3 0x90
39 #define EEPROM_ADDR_CHIP 0x120
40
41 #undef CONFIG_MII
42 #define CONFIG_PHY_SMSC
43
44 #define CONFIG_FACTORYSET
45
46 /* Define own nand partitions */
47 #define CONFIG_ENV_OFFSET_REDUND    0x2E0000
48 #define CONFIG_ENV_SIZE_REDUND      0x2000
49 #define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
50
51 #ifndef CONFIG_SPL_BUILD
52
53 /* Default env settings */
54 #define CONFIG_EXTRA_ENV_SETTINGS \
55         "hostname=draco\0" \
56         "ubi_off=2048\0"\
57         "nand_img_size=0x400000\0" \
58         "optargs=\0" \
59         "preboot=draco_led 0\0" \
60         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
61         CONFIG_ENV_SETTINGS_V2 \
62         CONFIG_ENV_SETTINGS_NAND_V2
63
64 #ifndef CONFIG_RESTORE_FLASH
65 /* set to negative value for no autoboot */
66
67 #define CONFIG_BOOTCOMMAND \
68 "if dfubutton; then " \
69         "run dfu_start; " \
70         "reset; " \
71 "fi;" \
72 "run nand_boot;" \
73 "run nand_boot_backup;" \
74 "reset;"
75
76 #else
77
78 #define CONFIG_BOOTCOMMAND                      \
79         "setenv autoload no; "                  \
80         "dhcp; "                                \
81         "if tftp 80000000 debrick.scr; then "   \
82                 "source 80000000; "             \
83         "fi"
84 #endif
85 #endif  /* CONFIG_SPL_BUILD */
86 #endif  /* ! __CONFIG_DRACO_H */