include/configs/dra7xx_evm.h

   1 /*
   2  * (C) Copyright 2013
   3  * Texas Instruments Incorporated.
   4  * Lokesh Vutla   <lokeshvutla@ti.com>
   5  *
   6  * Configuration settings for the TI DRA7XX board.
   7  * See ti_omap5_common.h for omap5 common settings.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_DRA7XX_EVM_H
  13 #define __CONFIG_DRA7XX_EVM_H
  14
  15 #define CONFIG_DRA7XX
  16 #define CONFIG_BOARD_EARLY_INIT_F
  17
  18 #ifdef CONFIG_SPL_BUILD
  19 #define CONFIG_IODELAY_RECALIBRATION
  20 #endif
  21
  22 #define CONFIG_VERY_BIG_RAM
  23 #define CONFIG_PHYS_64BIT
  24 #define CONFIG_NR_DRAM_BANKS            2
  25 #define CONFIG_MAX_MEM_MAPPED           0x80000000
  26
  27 #ifndef CONFIG_QSPI_BOOT
  28 /* MMC ENV related defines */
  29 #define CONFIG_ENV_IS_IN_MMC
  30 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
  31 #define CONFIG_ENV_SIZE                 (128 << 10)
  32 #define CONFIG_ENV_OFFSET               0xE0000
  33 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  34 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  35 #endif
  36
  37 #if (CONFIG_CONS_INDEX == 1)
  38 #define CONSOLEDEV                      "ttyO0"
  39 #elif (CONFIG_CONS_INDEX == 3)
  40 #define CONSOLEDEV                      "ttyO2"
  41 #endif
  42 #define CONFIG_SYS_NS16550_COM1         UART1_BASE      /* Base EVM has UART0 */
  43 #define CONFIG_SYS_NS16550_COM2         UART2_BASE      /* UART2 */
  44 #define CONFIG_SYS_NS16550_COM3         UART3_BASE      /* UART3 */
  45 #define CONFIG_BAUDRATE                 115200
  46
  47 #define CONFIG_SYS_OMAP_ABE_SYSCK
  48
  49 #ifndef CONFIG_SPL_BUILD
  50 /* Define the default GPT table for eMMC */
  51 #define PARTS_DEFAULT \
  52         /* Linux partitions */ \
  53         "uuid_disk=${uuid_gpt_disk};" \
  54         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
  55         /* Android partitions */ \
  56         "partitions_android=" \
  57         "uuid_disk=${uuid_gpt_disk};" \
  58         "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \
  59         "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \
  60         "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
  61         "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
  62         "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \
  63         "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
  64         "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
  65         "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
  66         "name=system,size=768M,uuid=${uuid_gpt_system};" \
  67         "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
  68         "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
  69         "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
  70         "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
  71
  72 #define DFU_ALT_INFO_MMC \
  73         "dfu_alt_info_mmc=" \
  74         "boot part 0 1;" \
  75         "rootfs part 0 2;" \
  76         "MLO fat 0 1;" \
  77         "MLO.raw raw 0x100 0x100;" \
  78         "u-boot.img.raw raw 0x300 0x400;" \
  79         "spl-os-args.raw raw 0x80 0x80;" \
  80         "spl-os-image.raw raw 0x900 0x2000;" \
  81         "spl-os-args fat 0 1;" \
  82         "spl-os-image fat 0 1;" \
  83         "u-boot.img fat 0 1;" \
  84         "uEnv.txt fat 0 1\0"
  85
  86 #define DFU_ALT_INFO_EMMC \
  87         "dfu_alt_info_emmc=" \
  88         "rawemmc raw 0 3751936;" \
  89         "boot part 1 1;" \
  90         "rootfs part 1 2;" \
  91         "MLO fat 1 1;" \
  92         "MLO.raw raw 0x100 0x100;" \
  93         "u-boot.img.raw raw 0x300 0x400;" \
  94         "spl-os-args.raw raw 0x80 0x80;" \
  95         "spl-os-image.raw raw 0x900 0x2000;" \
  96         "spl-os-args fat 1 1;" \
  97         "spl-os-image fat 1 1;" \
  98         "u-boot.img fat 1 1;" \
  99         "uEnv.txt fat 1 1\0"
 100
 101 #define DFU_ALT_INFO_RAM \
 102         "dfu_alt_info_ram=" \
 103         "kernel ram 0x80200000 0x4000000;" \
 104         "fdt ram 0x80f80000 0x80000;" \
 105         "ramdisk ram 0x81000000 0x4000000\0"
 106
 107 #define DFU_ALT_INFO_QSPI \
 108         "dfu_alt_info_qspi=" \
 109         "MLO raw 0x0 0x010000;" \
 110         "MLO.backup1 raw 0x010000 0x010000;" \
 111         "MLO.backup2 raw 0x020000 0x010000;" \
 112         "MLO.backup3 raw 0x030000 0x010000;" \
 113         "u-boot.img raw 0x040000 0x0100000;" \
 114         "u-boot-spl-os raw 0x140000 0x080000;" \
 115         "u-boot-env raw 0x1C0000 0x010000;" \
 116         "u-boot-env.backup raw 0x1D0000 0x010000;" \
 117         "kernel raw 0x1E0000 0x800000\0"
 118
 119 #define DFUARGS \
 120         "dfu_bufsiz=0x10000\0" \
 121         DFU_ALT_INFO_MMC \
 122         DFU_ALT_INFO_EMMC \
 123         DFU_ALT_INFO_RAM \
 124         DFU_ALT_INFO_QSPI
 125
 126 /* Fastboot */
 127 #define CONFIG_USB_FUNCTION_FASTBOOT
 128 #define CONFIG_CMD_FASTBOOT
 129 #define CONFIG_ANDROID_BOOT_IMAGE
 130 #define CONFIG_FASTBOOT_BUF_ADDR    CONFIG_SYS_LOAD_ADDR
 131 #define CONFIG_FASTBOOT_BUF_SIZE    0x2F000000
 132 #define CONFIG_FASTBOOT_FLASH
 133 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
 134 #endif
 135
 136 #include <configs/ti_omap5_common.h>
 137
 138 /* Enhance our eMMC support / experience. */
 139 #define CONFIG_CMD_GPT
 140 #define CONFIG_EFI_PARTITION
 141 #define CONFIG_RANDOM_UUID
 142 #define CONFIG_HSMMC2_8BIT
 143
 144 /* CPSW Ethernet */
 145 #define CONFIG_BOOTP_DNS                /* Configurable parts of CMD_DHCP */
 146 #define CONFIG_BOOTP_DNS2
 147 #define CONFIG_BOOTP_SEND_HOSTNAME
 148 #define CONFIG_BOOTP_GATEWAY
 149 #define CONFIG_BOOTP_SUBNETMASK
 150 #define CONFIG_NET_RETRY_COUNT          10
 151 #define CONFIG_DRIVER_TI_CPSW           /* Driver for IP block */
 152 #define CONFIG_MII                      /* Required in net/eth.c */
 153 #define CONFIG_PHY_GIGE                 /* per-board part of CPSW */
 154 #define CONFIG_PHYLIB
 155 #define CONFIG_PHY_TI
 156
 157 /* SPI */
 158 #undef  CONFIG_OMAP3_SPI
 159 #define CONFIG_TI_SPI_MMAP
 160 #define CONFIG_SF_DEFAULT_SPEED                64000000
 161 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
 162 #define CONFIG_QSPI_QUAD_SUPPORT
 163
 164 #ifdef CONFIG_SPL_BUILD
 165 #undef CONFIG_DM_SPI
 166 #undef CONFIG_DM_SPI_FLASH
 167 #endif
 168
 169 /*
 170  * Default to using SPI for environment, etc.
 171  * 0x000000 - 0x010000 : QSPI.SPL (64KiB)
 172  * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB)
 173  * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB)
 174  * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB)
 175  * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
 176  * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
 177  * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
 178  * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
 179  * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
 180  * 0x9E0000 - 0x2000000 : USERLAND
 181  */
 182 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x1E0000
 183 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
 184 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 185 #if defined(CONFIG_QSPI_BOOT)
 186 /* In SPL, use the environment and discard MMC support for space. */
 187 #ifdef CONFIG_SPL_BUILD
 188 #undef CONFIG_SPL_MMC_SUPPORT
 189 #undef CONFIG_SPL_MAX_SIZE
 190 #define CONFIG_SPL_MAX_SIZE             (64 << 10) /* 64 KiB */
 191 #endif
 192 #define CONFIG_SPL_ENV_SUPPORT
 193 #define CONFIG_ENV_IS_IN_SPI_FLASH
 194 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 195 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 196 #define CONFIG_ENV_SIZE                 (64 << 10)
 197 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64 KB sectors */
 198 #define CONFIG_ENV_OFFSET               0x1C0000
 199 #define CONFIG_ENV_OFFSET_REDUND        0x1D0000
 200 #endif
 201
 202 /* SPI SPL */
 203 #define CONFIG_SPL_SPI_SUPPORT
 204 #define CONFIG_SPL_DMA_SUPPORT
 205 #define CONFIG_TI_EDMA3
 206 #define CONFIG_SPL_SPI_LOAD
 207 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 208 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 209
 210 #define CONFIG_SUPPORT_EMMC_BOOT
 211
 212 /* USB xHCI HOST */
 213 #define CONFIG_USB_HOST
 214 #define CONFIG_USB_XHCI
 215 #define CONFIG_USB_XHCI_DWC3
 216 #define CONFIG_USB_XHCI_OMAP
 217 #define CONFIG_USB_STORAGE
 218 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 219
 220 #define CONFIG_OMAP_USB_PHY
 221 #define CONFIG_OMAP_USB2PHY2_HOST
 222
 223 /* USB Device Firmware Update support */
 224 #define CONFIG_USB_FUNCTION_DFU
 225 #define CONFIG_DFU_RAM
 226
 227 #define CONFIG_DFU_MMC
 228 #define CONFIG_DFU_RAM
 229 #define CONFIG_DFU_SF
 230
 231 /* SATA */
 232 #define CONFIG_BOARD_LATE_INIT
 233 #define CONFIG_SCSI
 234 #define CONFIG_LIBATA
 235 #define CONFIG_SCSI_AHCI
 236 #define CONFIG_SCSI_AHCI_PLAT
 237 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 238 #define CONFIG_SYS_SCSI_MAX_LUN         1
 239 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 240                                                 CONFIG_SYS_SCSI_MAX_LUN)
 241
 242 /* NAND support */
 243 #ifdef CONFIG_NAND
 244 /* NAND: device related configs */
 245 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 246 #define CONFIG_SYS_NAND_OOBSIZE         64
 247 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 248 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 249 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 250                                          CONFIG_SYS_NAND_PAGE_SIZE)
 251 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 252 /* NAND: driver related configs */
 253 #define CONFIG_NAND_OMAP_GPMC
 254 #define CONFIG_NAND_OMAP_ELM
 255 #define CONFIG_SYS_NAND_ONFI_DETECTION
 256 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 257 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 258 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 259                                          10, 11, 12, 13, 14, 15, 16, 17, \
 260                                          18, 19, 20, 21, 22, 23, 24, 25, \
 261                                          26, 27, 28, 29, 30, 31, 32, 33, \
 262                                          34, 35, 36, 37, 38, 39, 40, 41, \
 263                                          42, 43, 44, 45, 46, 47, 48, 49, \
 264                                          50, 51, 52, 53, 54, 55, 56, 57, }
 265 #define CONFIG_SYS_NAND_ECCSIZE         512
 266 #define CONFIG_SYS_NAND_ECCBYTES        14
 267 #define MTDIDS_DEFAULT                  "nand0=nand.0"
 268 #define MTDPARTS_DEFAULT                "mtdparts=nand.0:" \
 269                                         "128k(NAND.SPL)," \
 270                                         "128k(NAND.SPL.backup1)," \
 271                                         "128k(NAND.SPL.backup2)," \
 272                                         "128k(NAND.SPL.backup3)," \
 273                                         "256k(NAND.u-boot-spl-os)," \
 274                                         "1m(NAND.u-boot)," \
 275                                         "128k(NAND.u-boot-env)," \
 276                                         "128k(NAND.u-boot-env.backup1)," \
 277                                         "8m(NAND.kernel)," \
 278                                         "-(NAND.file-system)"
 279 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
 280 /* NAND: SPL related configs */
 281 #ifdef CONFIG_SPL_NAND_SUPPORT
 282 #define CONFIG_SPL_NAND_AM33XX_BCH
 283 #endif
 284 /* NAND: SPL falcon mode configs */
 285 #ifdef CONFIG_SPL_OS_BOOT
 286 #define CONFIG_CMD_SPL_NAND_OFS         0x00080000 /* os-boot params*/
 287 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
 288 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 289 #endif
 290 #endif /* !CONFIG_NAND */
 291
 292 /* Parallel NOR Support */
 293 #if defined(CONFIG_NOR)
 294 /* NOR: device related configs */
 295 #define CONFIG_SYS_MAX_FLASH_SECT       512
 296 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 297 #define CONFIG_SYS_FLASH_SIZE           (64 * 1024 * 1024) /* 64 MB */
 298 /* #define CONFIG_INIT_IGNORE_ERROR */
 299 #undef CONFIG_SYS_NO_FLASH
 300 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 301 #define CONFIG_SYS_FLASH_PROTECTION
 302 #define CONFIG_SYS_FLASH_CFI
 303 #define CONFIG_FLASH_CFI_DRIVER
 304 #define CONFIG_FLASH_CFI_MTD
 305 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 306 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
 307 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 308 /* Reduce SPL size by removing unlikey targets */
 309 #ifdef CONFIG_NOR_BOOT
 310 #define CONFIG_ENV_IS_IN_FLASH
 311 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)    /* 128 KiB */
 312 #define MTDIDS_DEFAULT                  "nor0=physmap-flash.0"
 313 #define MTDPARTS_DEFAULT                "mtdparts=physmap-flash.0:" \
 314                                         "128k(NOR.SPL)," \
 315                                         "128k(NOR.SPL.backup1)," \
 316                                         "128k(NOR.SPL.backup2)," \
 317                                         "128k(NOR.SPL.backup3)," \
 318                                         "256k(NOR.u-boot-spl-os)," \
 319                                         "1m(NOR.u-boot)," \
 320                                         "128k(NOR.u-boot-env)," \
 321                                         "128k(NOR.u-boot-env.backup1)," \
 322                                         "8m(NOR.kernel)," \
 323                                         "-(NOR.rootfs)"
 324 #define CONFIG_ENV_OFFSET               0x001c0000
 325 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
 326 #endif
 327 #endif  /* NOR support */
 328
 329 /* EEPROM */
 330 #define CONFIG_EEPROM_CHIP_ADDRESS 0x50
 331 #define CONFIG_EEPROM_BUS_ADDRESS 0
 332
 333 #endif /* __CONFIG_DRA7XX_EVM_H */