include/configs/dns325.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011
   4  * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   5  *
   6  * Based on Kirkwood support:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  */
  11
  12 #ifndef _CONFIG_DNS325_H
  13 #define _CONFIG_DNS325_H
  14
  15 /*
  16  * Machine number definition
  17  */
  18 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  24 #define CONFIG_KW88F6281                /* SOC Name */
  25 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27 /*
  28  * Commands configuration
  29  */
  30
  31 /*
  32  * mv-common.h should be defined after CMD configs since it used them
  33  * to enable certain macros
  34  */
  35 #include "mv-common.h"
  36
  37 /* Remove or override few declarations from mv-common.h */
  38
  39 /*
  40  * Ethernet Driver configuration
  41  */
  42 #ifdef CONFIG_CMD_NET
  43 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  44 #define CONFIG_NETCONSOLE
  45 #endif
  46
  47 /*
  48  * SATA Driver configuration
  49  */
  50 #ifdef CONFIG_MVSATA_IDE
  51 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  52 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  53 #endif
  54
  55 /*
  56  * Enable GPI0 support
  57  */
  58 #define CONFIG_KIRKWOOD_GPIO
  59
  60 /*
  61  * Environment variables configurations
  62  */
  63 #ifdef CONFIG_CMD_NAND
  64 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  65 #endif
  66
  67 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
  68 #define CONFIG_ENV_ADDR                 0xe0000
  69 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
  70
  71 /*
  72  * Default environment variables
  73  */
  74
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         "stdin=serial\0" \
  77         "stdout=serial\0" \
  78         "stderr=serial\0" \
  79         "loadaddr=0x800000\0" \
  80         "autoload=no\0" \
  81         "console=ttyS0,115200\0" \
  82         "mtdparts="CONFIG_MTDPARTS_DEFAULT \
  83         "optargs=\0" \
  84         "bootenv=uEnv.txt\0" \
  85         "importbootenv=echo Importing environment ...; " \
  86                 "env import -t ${loadaddr} ${filesize}\0" \
  87         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
  88         "setbootargs=setenv bootargs console=${console} " \
  89                 "${optargs} " \
  90                 "${mtdparts} " \
  91                 "root=${bootenvroot} " \
  92                 "rootfstype=${bootenvrootfstype}\0" \
  93         "subbootcmd=run setbootargs; " \
  94                 "if run bootenvloadimage; then " \
  95                         "bootm ${loadaddr};" \
  96                 "fi;\0" \
  97         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
  98         "nandrootfstype=ubifs\0" \
  99         "nandloadimage=nand read ${loadaddr} kernel\0" \
 100         "setnandbootenv=echo Booting from nand ...; " \
 101                 "setenv bootenvroot ${nandroot}; " \
 102                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 103                 "setenv bootenvloadimage ${nandloadimage}\0"
 104
 105 #define CONFIG_BOOTCOMMAND \
 106         "if test -n ${bootenv} && usb start; then " \
 107                 "if run loadbootenv; then " \
 108                         "echo Loaded environment ${bootenv} from usb;" \
 109                         "run importbootenv;" \
 110                 "fi;" \
 111                 "if test -n ${bootenvcmd}; then " \
 112                         "echo Running bootenvcmd ...;" \
 113                         "run bootenvcmd;" \
 114                 "fi;" \
 115         "fi;" \
 116         "run setnandbootenv subbootcmd;"
 117
 118 #endif /* _CONFIG_DNS325_H */