include/configs/dns325.h

   1 /*
   2  * Copyright (C) 2011
   3  * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
   4  *
   5  * Based on Kirkwood support:
   6  * (C) Copyright 2009
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef _CONFIG_DNS325_H
  14 #define _CONFIG_DNS325_H
  15
  16 /*
  17  * Machine number definition
  18  */
  19 #define MACH_TYPE_DNS325                3800
  20 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  21 #define CONFIG_IDENT_STRING             "\nD-Link DNS-325"
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  27 #define CONFIG_KW88F6281                /* SOC Name */
  28 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  29
  30 /*
  31  * Commands configuration
  32  */
  33 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  34 #include <config_cmd_default.h>
  35 #define CONFIG_CMD_DHCP
  36 #define CONFIG_CMD_ENV
  37 #define CONFIG_CMD_NAND
  38 #define CONFIG_CMD_PING
  39 #define CONFIG_CMD_USB
  40 #define CONFIG_CMD_IDE
  41 #define CONFIG_CMD_DATE
  42 #define CONFIG_SYS_MVFS
  43
  44 #define CONFIG_NR_DRAM_BANKS            1
  45
  46 /*
  47  * mv-common.h should be defined after CMD configs since it used them
  48  * to enable certain macros
  49  */
  50 #include "mv-common.h"
  51
  52 /* Remove or override few declarations from mv-common.h */
  53 #undef CONFIG_SYS_PROMPT
  54
  55 /*
  56  * Ethernet Driver configuration
  57  */
  58 #ifdef CONFIG_CMD_NET
  59 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  60 #define CONFIG_NETCONSOLE
  61 #endif
  62
  63 /*
  64  * SATA Driver configuration
  65  */
  66 #ifdef CONFIG_MVSATA_IDE
  67 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  68 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  69 #endif
  70
  71 /*
  72  * RTC driver configuration
  73  */
  74 #ifdef CONFIG_CMD_DATE
  75 #define CONFIG_RTC_MV
  76 #endif
  77
  78 /*
  79  * Enable GPI0 support
  80  */
  81 #define CONFIG_KIRKWOOD_GPIO
  82
  83 /*
  84  * Use the HUSH parser
  85  */
  86 #define CONFIG_SYS_HUSH_PARSER
  87
  88 /*
  89  * Console configuration
  90  */
  91 #define CONFIG_CONSOLE_MUX
  92 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  93
  94 /*
  95  * Enable device tree support
  96  */
  97 #define CONFIG_OF_LIBFDT
  98
  99 /*
 100  * Display cpu info at boot
 101  */
 102 #define CONFIG_DISPLAY_CPUINFO
 103
 104 /*
 105  * Environment variables configurations
 106  */
 107 #ifdef CONFIG_CMD_NAND
 108 #define CONFIG_ENV_IS_IN_NAND
 109 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
 110 #else
 111 #define CONFIG_ENV_IS_NOWHERE
 112 #endif
 113
 114 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 115 #define CONFIG_ENV_ADDR                 0xe0000
 116 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
 117
 118 /*
 119  * Default environment variables
 120  */
 121 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
 122
 123 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
 124         "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
 125
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "stdin=serial\0" \
 128         "stdout=serial\0" \
 129         "stderr=serial\0" \
 130         "loadaddr=0x800000\0" \
 131         "autoload=no\0" \
 132         "console=ttyS0,115200\0" \
 133         "mtdparts="MTDPARTS_DEFAULT \
 134         "optargs=\0" \
 135         "bootenv=uEnv.txt\0" \
 136         "importbootenv=echo Importing environment ...; " \
 137                 "env import -t ${loadaddr} ${filesize}\0" \
 138         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 139         "setbootargs=setenv bootargs console=${console} " \
 140                 "${optargs} " \
 141                 "${mtdparts} " \
 142                 "root=${bootenvroot} " \
 143                 "rootfstype=${bootenvrootfstype}\0" \
 144         "subbootcmd=run setbootargs; " \
 145                 "if run bootenvloadimage; then " \
 146                         "bootm ${loadaddr};" \
 147                 "fi;\0" \
 148         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 149         "nandrootfstype=ubifs\0" \
 150         "nandloadimage=nand read ${loadaddr} kernel\0" \
 151         "setnandbootenv=echo Booting from nand ...; " \
 152                 "setenv bootenvroot ${nandroot}; " \
 153                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 154                 "setenv bootenvloadimage ${nandloadimage}\0"
 155
 156 #define CONFIG_BOOTCOMMAND \
 157         "if test -n ${bootenv} && usb start; then " \
 158                 "if run loadbootenv; then " \
 159                         "echo Loaded environment ${bootenv} from usb;" \
 160                         "run importbootenv;" \
 161                 "fi;" \
 162                 "if test -n ${bootenvcmd}; then " \
 163                         "echo Running bootenvcmd ...;" \
 164                         "run bootenvcmd;" \
 165                 "fi;" \
 166         "fi;" \
 167         "run setnandbootenv subbootcmd;"
 168
 169 #endif /* _CONFIG_DNS325_H */