3 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
5 * Based on Kirkwood support:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef _CONFIG_DNS325_H
14 #define _CONFIG_DNS325_H
17 * Machine number definition
19 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325
22 * High Level Configuration Options (easy to change)
24 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
25 #define CONFIG_KW88F6281 /* SOC Name */
26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29 * Commands configuration
31 #define CONFIG_CMD_ENV
32 #define CONFIG_CMD_NAND
33 #define CONFIG_CMD_IDE
34 #define CONFIG_CMD_DATE
35 #define CONFIG_SYS_MVFS
37 #define CONFIG_NR_DRAM_BANKS 1
40 * mv-common.h should be defined after CMD configs since it used them
41 * to enable certain macros
43 #include "mv-common.h"
45 /* Remove or override few declarations from mv-common.h */
48 * Ethernet Driver configuration
51 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
52 #define CONFIG_NETCONSOLE
56 * SATA Driver configuration
58 #ifdef CONFIG_MVSATA_IDE
59 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
60 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
64 * RTC driver configuration
66 #ifdef CONFIG_CMD_DATE
73 #define CONFIG_KIRKWOOD_GPIO
76 * Environment variables configurations
78 #ifdef CONFIG_CMD_NAND
79 #define CONFIG_ENV_IS_IN_NAND
80 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
82 #define CONFIG_ENV_IS_NOWHERE
85 #define CONFIG_ENV_SIZE 0x20000 /* 128KB */
86 #define CONFIG_ENV_ADDR 0xe0000
87 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
90 * Default environment variables
92 #define MTDIDS_DEFAULT "nand0=orion_nand"
94 #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
95 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
97 #define CONFIG_EXTRA_ENV_SETTINGS \
101 "loadaddr=0x800000\0" \
103 "console=ttyS0,115200\0" \
104 "mtdparts="MTDPARTS_DEFAULT \
106 "bootenv=uEnv.txt\0" \
107 "importbootenv=echo Importing environment ...; " \
108 "env import -t ${loadaddr} ${filesize}\0" \
109 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
110 "setbootargs=setenv bootargs console=${console} " \
113 "root=${bootenvroot} " \
114 "rootfstype=${bootenvrootfstype}\0" \
115 "subbootcmd=run setbootargs; " \
116 "if run bootenvloadimage; then " \
117 "bootm ${loadaddr};" \
119 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
120 "nandrootfstype=ubifs\0" \
121 "nandloadimage=nand read ${loadaddr} kernel\0" \
122 "setnandbootenv=echo Booting from nand ...; " \
123 "setenv bootenvroot ${nandroot}; " \
124 "setenv bootenvrootfstype ${nandrootfstype}; " \
125 "setenv bootenvloadimage ${nandloadimage}\0"
127 #define CONFIG_BOOTCOMMAND \
128 "if test -n ${bootenv} && usb start; then " \
129 "if run loadbootenv; then " \
130 "echo Loaded environment ${bootenv} from usb;" \
131 "run importbootenv;" \
133 "if test -n ${bootenvcmd}; then " \
134 "echo Running bootenvcmd ...;" \
138 "run setnandbootenv subbootcmd;"
140 #endif /* _CONFIG_DNS325_H */