1 /* SPDX-License-Identifier: GPL-2.0+ */
4 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
6 * Based on Kirkwood support:
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
12 #ifndef _CONFIG_DNS325_H
13 #define _CONFIG_DNS325_H
16 * Machine number definition
18 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21 * High Level Configuration Options (easy to change)
23 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
24 #define CONFIG_KW88F6281 /* SOC Name */
25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
28 * Commands configuration
31 #define CONFIG_NR_DRAM_BANKS 1
34 * mv-common.h should be defined after CMD configs since it used them
35 * to enable certain macros
37 #include "mv-common.h"
39 /* Remove or override few declarations from mv-common.h */
42 * Ethernet Driver configuration
45 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
46 #define CONFIG_NETCONSOLE
50 * SATA Driver configuration
52 #ifdef CONFIG_MVSATA_IDE
53 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
54 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
60 #define CONFIG_KIRKWOOD_GPIO
63 * Environment variables configurations
65 #ifdef CONFIG_CMD_NAND
66 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
69 #define CONFIG_ENV_SIZE 0x20000 /* 128KB */
70 #define CONFIG_ENV_ADDR 0xe0000
71 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
74 * Default environment variables
77 #define CONFIG_EXTRA_ENV_SETTINGS \
81 "loadaddr=0x800000\0" \
83 "console=ttyS0,115200\0" \
84 "mtdparts="CONFIG_MTDPARTS_DEFAULT \
86 "bootenv=uEnv.txt\0" \
87 "importbootenv=echo Importing environment ...; " \
88 "env import -t ${loadaddr} ${filesize}\0" \
89 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
90 "setbootargs=setenv bootargs console=${console} " \
93 "root=${bootenvroot} " \
94 "rootfstype=${bootenvrootfstype}\0" \
95 "subbootcmd=run setbootargs; " \
96 "if run bootenvloadimage; then " \
97 "bootm ${loadaddr};" \
99 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
100 "nandrootfstype=ubifs\0" \
101 "nandloadimage=nand read ${loadaddr} kernel\0" \
102 "setnandbootenv=echo Booting from nand ...; " \
103 "setenv bootenvroot ${nandroot}; " \
104 "setenv bootenvrootfstype ${nandrootfstype}; " \
105 "setenv bootenvloadimage ${nandloadimage}\0"
107 #define CONFIG_BOOTCOMMAND \
108 "if test -n ${bootenv} && usb start; then " \
109 "if run loadbootenv; then " \
110 "echo Loaded environment ${bootenv} from usb;" \
111 "run importbootenv;" \
113 "if test -n ${bootenvcmd}; then " \
114 "echo Running bootenvcmd ...;" \
118 "run setnandbootenv subbootcmd;"
120 #endif /* _CONFIG_DNS325_H */