3 * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
5 * Based on Kirkwood support:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef _CONFIG_DNS325_H
14 #define _CONFIG_DNS325_H
17 * Machine number definition
19 #define MACH_TYPE_DNS325 3800
20 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21 #define CONFIG_IDENT_STRING "\nD-Link DNS-325"
24 * High Level Configuration Options (easy to change)
26 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
27 #define CONFIG_KIRKWOOD /* SOC Family Name */
28 #define CONFIG_KW88F6281 /* SOC Name */
29 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
32 * Commands configuration
34 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
35 #include <config_cmd_default.h>
36 #define CONFIG_CMD_DHCP
37 #define CONFIG_CMD_ENV
38 #define CONFIG_CMD_NAND
39 #define CONFIG_CMD_PING
40 #define CONFIG_CMD_USB
41 #define CONFIG_CMD_IDE
42 #define CONFIG_CMD_DATE
43 #define CONFIG_SYS_MVFS
45 #define CONFIG_NR_DRAM_BANKS 1
48 * mv-common.h should be defined after CMD configs since it used them
49 * to enable certain macros
51 #include "mv-common.h"
53 /* Remove or override few declarations from mv-common.h */
54 #undef CONFIG_SYS_PROMPT
55 #define CONFIG_SYS_PROMPT "=> "
58 * Ethernet Driver configuration
61 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
62 #define CONFIG_NETCONSOLE
66 * SATA Driver configuration
68 #ifdef CONFIG_MVSATA_IDE
69 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
70 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
74 * RTC driver configuration
76 #ifdef CONFIG_CMD_DATE
83 #define CONFIG_KIRKWOOD_GPIO
88 #define CONFIG_SYS_HUSH_PARSER
91 * Console configuration
93 #define CONFIG_CONSOLE_MUX
94 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
97 * Enable device tree support
99 #define CONFIG_OF_LIBFDT
102 * Display cpu info at boot
104 #define CONFIG_DISPLAY_CPUINFO
107 * Environment variables configurations
109 #ifdef CONFIG_CMD_NAND
110 #define CONFIG_ENV_IS_IN_NAND
111 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
113 #define CONFIG_ENV_IS_NOWHERE
116 #define CONFIG_ENV_SIZE 0x20000 /* 128KB */
117 #define CONFIG_ENV_ADDR 0xe0000
118 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
121 * Default environment variables
123 #define MTDIDS_DEFAULT "nand0=orion_nand"
125 #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
126 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
128 #define CONFIG_EXTRA_ENV_SETTINGS \
132 "loadaddr=0x800000\0" \
134 "console=ttyS0,115200\0" \
135 "mtdparts="MTDPARTS_DEFAULT \
137 "bootenv=uEnv.txt\0" \
138 "importbootenv=echo Importing environment ...; " \
139 "env import -t ${loadaddr} ${filesize}\0" \
140 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
141 "setbootargs=setenv bootargs console=${console} " \
144 "root=${bootenvroot} " \
145 "rootfstype=${bootenvrootfstype}\0" \
146 "subbootcmd=run setbootargs; " \
147 "if run bootenvloadimage; then " \
148 "bootm ${loadaddr};" \
150 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
151 "nandrootfstype=ubifs\0" \
152 "nandloadimage=nand read ${loadaddr} kernel\0" \
153 "setnandbootenv=echo Booting from nand ...; " \
154 "setenv bootenvroot ${nandroot}; " \
155 "setenv bootenvrootfstype ${nandrootfstype}; " \
156 "setenv bootenvloadimage ${nandloadimage}\0"
158 #define CONFIG_BOOTCOMMAND \
159 "if test -n ${bootenv} && usb start; then " \
160 "if run loadbootenv; then " \
161 "echo Loaded environment ${bootenv} from usb;" \
162 "run importbootenv;" \
164 "if test -n ${bootenvcmd}; then " \
165 "echo Running bootenvcmd ...;" \
169 "run setnandbootenv subbootcmd;"
171 #endif /* _CONFIG_DNS325_H */