include/configs/display5.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 /* Falcon Mode */
  13 #define CONFIG_CMD_SPL
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15 #define CONFIG_CMD_SPL_WRITE_SIZE       (44 * SZ_1K)
  16
  17 /* Falcon Mode - MMC support */
  18 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x3F00
  19 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  \
  20         (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x100   /* 128KiB */
  22
  23 /*
  24  * display5 SPI-NOR memory layout
  25  *
  26  * The definition can be found in Kconfig's
  27  * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
  28  *
  29  * 0x000000 - 0x020000 : SPI.SPL (128KiB)
  30  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  31  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  32  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
  33  * 0x140000 - 0x540000 : SPI.swupdate-kernel-FIT (4MiB)
  34  * 0x540000 - 0x1540000 : SPI.swupdate-initramfs  (16MiB)
  35  * 0x1540000 - 0x1640000 : SPI.factory  (1MiB)
  36  */
  37
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_SPI_FLASH_MTD
  40 #endif
  41
  42 /* Below values are "dummy" - only to avoid build break */
  43 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x150000
  44 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
  45 #define CONFIG_SYS_SPI_ARGS_SIZE        0x10000
  46
  47 #include "imx6_spl.h"
  48 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
  49
  50 #define CONFIG_CMDLINE_TAG
  51 #define CONFIG_SETUP_MEMORY_TAGS
  52 #define CONFIG_INITRD_TAG
  53 #define CONFIG_REVISION_TAG
  54
  55 /* Size of malloc() pool */
  56 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  57
  58 /*#define CONFIG_MXC_UART*/
  59 #define CONFIG_MXC_UART_BASE            UART5_BASE
  60
  61 /* SPI NOR Flash */
  62
  63 /* I2C Configs */
  64 #define CONFIG_SYS_I2C
  65 #define CONFIG_SYS_I2C_MXC
  66 #define CONFIG_SYS_I2C_MXC_I2C1
  67 #define CONFIG_SYS_I2C_MXC_I2C2
  68 #define CONFIG_SYS_I2C_MXC_I2C3
  69 #define CONFIG_I2C_MULTI_BUS
  70 #define CONFIG_SYS_I2C_SPEED            100000
  71 #define CONFIG_I2C_EDID
  72 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
  73
  74 /* Ethernet */
  75 #ifdef CONFIG_FEC_MXC
  76 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  77 #define CONFIG_FEC_XCV_TYPE             RGMII
  78 #define CONFIG_ETHPRIME                 "FEC"
  79 #define CONFIG_FEC_MXC_PHYADDR          0
  80 #endif
  81
  82 /* MMC Configs */
  83 #define CONFIG_FSL_USDHC
  84 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  85 #define CONFIG_SYS_FSL_USDHC_NUM        2
  86
  87 /* allow to overwrite serial and ethaddr */
  88 #define CONFIG_ENV_OVERWRITE
  89 #define CONFIG_BAUDRATE                 115200
  90
  91 #ifndef CONFIG_BOOTCOMMAND
  92 #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
  93              "run recovery;" \
  94         "else if test ${BOOT_FROM} = FACTORY; then " \
  95              "run factory_nfs;" \
  96         "else " \
  97              "run boot_mmc;" \
  98         "fi;fi"
  99 #endif
 100
 101 #define PARTS_DEFAULT \
 102         /* Linux partitions */ \
 103         "partitions=" \
 104         "uuid_disk=${uuid_gpt_disk};" \
 105         "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
 106         "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
 107         "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
 108         "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
 109         "name=data,size=-,uuid=${uuid_gpt_data}\0"
 110
 111 #define SWUPDATE_RECOVERY_PROCEDURE \
 112         "echo '#######################';" \
 113         "echo '# RECOVERY SWUupdate  #';" \
 114         "echo '#######################';" \
 115         "echo '#######################';" \
 116         "echo '# GPT verify          #';" \
 117         "if gpt verify mmc ${mmcdev} ${partitions}; then " \
 118                 "echo '# OK !                #';" \
 119         "else " \
 120                 "echo '# FAILED !            #';" \
 121                 "echo '# GPT RESTORATION     #';" \
 122                 "gpt write mmc ${mmcdev} ${partitions};" \
 123         "fi;" \
 124         "echo '#######################';" \
 125         "setenv loadaddr_swu_initramfs 0x14000000;" \
 126         "setenv bootargs console=${console} " \
 127                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
 128                 ":${hostname}::off root=/dev/ram rw;" \
 129         "sf probe;" \
 130         "sf read ${loadaddr} swu-kernel;" \
 131         "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
 132         "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
 133
 134 #define SETUP_BOOTARGS \
 135         "run set_rootfs_part;" \
 136         "setenv bootargs ${bootargs} console=${console} "         \
 137                       "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
 138                       "rootwait rootfstype=ext4 rw; " \
 139         "run set_kernel_part;" \
 140         "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 141         "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
 142         "setenv fdt_conf imx6q-${board}-${display}.dtb; "
 143
 144 /* All the numbers are in LBAs */
 145 #define __TFTP_UPDATE_KERNEL \
 146         "tftp_mmc_fitImg=" \
 147            "if test ! -n ${kernel_part}; then " \
 148                "setenv kernel_part ${kernel_part_active};" \
 149            "fi;" \
 150            "if tftp ${loadaddr} ${kernel_file}; then " \
 151                "setexpr fw_sz ${filesize} / 0x200; " \
 152                "setexpr fw_sz ${fw_sz} + 1; "  \
 153                "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 154                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 155            "; fi\0" \
 156
 157 #define TFTP_UPDATE_KERNEL \
 158         "setenv kernel_part ${kernel_part_active};" \
 159         "run tftp_mmc_fitImg;" \
 160         "setenv kernel_part ${kernel_part_backup};" \
 161         "run tftp_mmc_fitImg;" \
 162
 163 #define __TFTP_UPDATE_ROOTFS \
 164         "tftp_mmc_rootfs=" \
 165            "if test ! -n ${rootfs_part}; then " \
 166                "setenv rootfs_part ${rootfs_part_active};" \
 167            "fi;" \
 168            "if tftp ${loadaddr} ${rootfs_file}; then " \
 169                "setexpr fw_sz ${filesize} / 0x200; " \
 170                "setexpr fw_sz ${fw_sz} + 1; "  \
 171                "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
 172                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 173            "; fi\0" \
 174
 175 #define TFTP_UPDATE_ROOTFS \
 176         "setenv rootfs_part ${rootfs_part_active};" \
 177         "run tftp_mmc_rootfs;" \
 178         "run tftp_mmc_rootfs_bkp;" \
 179
 180
 181 #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 182         "tftp_sf_fitImg_SWU=" \
 183             "if tftp ${loadaddr} ${kernel_file}; then " \
 184                 "sf probe;" \
 185                 "sf erase swu-kernel +${filesize};" \
 186                 "sf write ${loadaddr} swu-kernel ${filesize};" \
 187         "; fi\0"          \
 188
 189 #define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 190         "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
 191         "tftp_sf_initramfs_SWU=" \
 192             "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
 193                 "sf probe;" \
 194                 "sf erase swu-initramfs +${filesize};" \
 195                 "sf write ${loadaddr} swu-initramfs ${filesize};" \
 196         "; fi\0"          \
 197
 198 #define TFTP_UPDATE_BOOTLOADER \
 199         "ubootfile=u-boot.img\0" \
 200         "ubootfileSPL=SPL\0" \
 201         "tftp_sf_uboot=" \
 202             "if tftp ${loadaddr} ${ubootfile}; then " \
 203                 "sf probe;" \
 204                 "sf erase u-boot +${filesize};" \
 205                 "sf write ${loadaddr} u-boot ${filesize}" \
 206         "; fi\0"          \
 207         "tftp_sf_SPL="    \
 208             "if tftp ${loadaddr} ${ubootfileSPL}; then " \
 209                 "sf probe;" \
 210                 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
 211                 "sf erase 0x0 +${uboot_SPL_size};" \
 212                 "sf write ${loadaddr} 0x400 ${filesize};" \
 213         "fi\0" \
 214
 215 #define TFTP_UPDATE_SPINOR \
 216         "spinorfile=core-image-lwn-display5.spinor\0" \
 217         "spinorsize=0x2000000\0" \
 218         "tftp_sf_img=" \
 219             "if tftp ${loadaddr} ${spinorfile}; then " \
 220                 "sf probe;" \
 221                 "sf erase 0x0 ${spinorsize};" \
 222                 "sf write ${loadaddr} 0x0 ${filesize};" \
 223         "fi\0" \
 224
 225 #define CONFIG_EXTRA_ENV_SETTINGS         \
 226         PARTS_DEFAULT \
 227         "gpio_recovery=93\0" \
 228         "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
 229         "display=tianma-tm070-800x480\0" \
 230         "board=display5\0" \
 231         "mmcdev=0\0" \
 232         "altbootcmd=run recovery\0" \
 233         "bootdelay=1\0" \
 234         "baudrate=115200\0" \
 235         "bootcmd=" CONFIG_BOOTCOMMAND "\0" \
 236         "ethact=FEC\0" \
 237         "netdev=eth0\0" \
 238         "boot_os=y\0" \
 239         "hostname=display5\0" \
 240         "loadaddr=0x12000000\0" \
 241         "fdtaddr=0x12800000\0" \
 242         "console=ttymxc4,115200 quiet cma=256M\0" \
 243         "fdtfile=imx6q-display5.dtb\0" \
 244         "fdt_high=0xffffffff\0" \
 245         "initrd_high=0xffffffff\0" \
 246         "kernel_file=fitImage\0" \
 247         "fitImg_fw_sz=0x2200\0" \
 248         "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 249         "download_kernel=" \
 250                 "tftpboot ${loadaddr} ${kernel_file};\0" \
 251         "factory_nfs=" \
 252              "setenv ipaddr 192.168.1.102;" \
 253              "setenv gatewayip 192.168.1.1;" \
 254              "setenv netmask 255.255.255.0;" \
 255              "setenv serverip 192.168.1.2;" \
 256              "echo BOOT: FACTORY (LEG);" \
 257              "run boot_nfs\0" \
 258         "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 259         "recovery=" \
 260              "echo BOOT: RECOVERY: SWU;" \
 261              "run boot_swu_recovery\0" \
 262         "boot_tftp=" \
 263         "if run download_kernel; then "   \
 264              "setenv bootargs console=${console} " \
 265              "root=/dev/mmcblk0p2 rootwait;" \
 266              "bootm ${loadaddr} - ${fdtaddr};reset;" \
 267         "fi\0" \
 268         "addip=setenv bootargs ${bootargs} " \
 269         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 270             "${hostname}:eth0:on"         \
 271         "\0"      \
 272         "nfsargs=setenv bootargs " \
 273         "root=/dev/nfs rw "       \
 274         "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
 275         "\0" \
 276         "rootpath=/srv/tftp/DISP5/rootfs\0" \
 277         "boot_nfs=" \
 278         "if run download_kernel; then "   \
 279              "run nfsargs;"       \
 280              "run addip;"         \
 281              "setenv bootargs ${bootargs} console=${console};"    \
 282              "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
 283              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 284         "fi\0" \
 285         "falcon_setup=" \
 286         "if mmc dev ${mmcdev}; then "     \
 287              SETUP_BOOTARGS \
 288              "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
 289              "setexpr fw_sz ${fdtargslen} / 0x200; " \
 290              "setexpr fw_sz ${fw_sz} + 1; "  \
 291              "mmc write ${fdtargsaddr} " \
 292              __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
 293         "fi\0" \
 294         "boot_mmc=" \
 295         "if mmc dev ${mmcdev}; then "     \
 296              SETUP_BOOTARGS \
 297              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 298         "fi\0" \
 299         "set_kernel_part=" \
 300         "if test ${BOOT_FROM} = ACTIVE; then " \
 301              "setenv kernel_part ${kernel_part_active};" \
 302              "echo BOOT: ACTIVE;" \
 303         "else if test ${BOOT_FROM} = BACKUP; then " \
 304              "setenv kernel_part ${kernel_part_backup};" \
 305              "echo BOOT: BACKUP;" \
 306         "else " \
 307              "run recovery;" \
 308         "fi;fi\0" \
 309         "set_rootfs_part=" \
 310         "if test ${BOOT_FROM} = ACTIVE; then " \
 311              "setenv rootfs_part ${rootfs_part_active};" \
 312         "else if test ${BOOT_FROM} = BACKUP; then " \
 313              "setenv rootfs_part ${rootfs_part_backup};" \
 314         "else " \
 315              "run recovery;" \
 316         "fi;fi\0" \
 317         "BOOT_FROM=ACTIVE\0" \
 318         TFTP_UPDATE_BOOTLOADER \
 319         TFTP_UPDATE_SPINOR \
 320         "kernel_part_active=1\0" \
 321         "kernel_part_backup=3\0" \
 322         __TFTP_UPDATE_KERNEL \
 323         "rootfs_part_active=2\0" \
 324         "rootfs_part_backup=4\0" \
 325         "rootfs_file=core-image-lwn-display5.ext4\0" \
 326         "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
 327         __TFTP_UPDATE_ROOTFS \
 328         "tftp_mmc_rootfs_bkp=" \
 329            "setenv rootfs_part ${rootfs_part_backup};" \
 330            "setenv rootfs_file ${rootfs_file_backup};" \
 331            "run tftp_mmc_rootfs\0" \
 332         TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 333         TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 334         "\0" \
 335
 336 /* Miscellaneous configurable options */
 337 #undef CONFIG_SYS_CBSIZE
 338 #define CONFIG_SYS_CBSIZE               2048
 339
 340 /* Print Buffer Size */
 341 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 342                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 343 #define CONFIG_SYS_MAXARGS              32
 344 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 345
 346 #define CONFIG_STANDALONE_LOAD_ADDR     0x10001000
 347 #define CONFIG_SYS_HZ                   1000
 348
 349 /* Physical Memory Map */
 350 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 351 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 352
 353 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 354 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 355
 356 #define CONFIG_SYS_INIT_SP_OFFSET \
 357         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 358 #define CONFIG_SYS_INIT_SP_ADDR \
 359         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 360
 361 /* Commands */
 362
 363 /* Watchdog */
 364 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   15000
 365
 366 /* ENV config */
 367 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 368 #define CONFIG_ENV_SIZE         (SZ_64K)
 369 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 370 #define CONFIG_ENV_OFFSET               (0x120000)
 371 #define CONFIG_ENV_SECT_SIZE            (SZ_64K)
 372 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 373 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 374                                                 CONFIG_ENV_SECT_SIZE)
 375 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 376 #endif
 377
 378 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 379 #endif /* __CONFIG_H */