include/configs/display5.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 /* Falcon Mode */
  13
  14 /* Falcon Mode - MMC support */
  15
  16 /*
  17  * display5 SPI-NOR memory layout
  18  *
  19  * The definition can be found in Kconfig's
  20  * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
  21  *
  22  * 0x000000 - 0x020000 : SPI.SPL (128KiB)
  23  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  24  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  25  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
  26  * 0x140000 - 0x740000 : SPI.swupdate-kernel-FIT (6MiB)
  27  * 0x740000 - 0x1B40000 : SPI.swupdate-initramfs  (20MiB)
  28  * 0x1B40000 - 0x1F00000 : SPI.reserved (3840KiB)
  29  * 0x1F00000 - 0x2000000 : SPI.factory  (1MiB)
  30  */
  31
  32 /* Below values are "dummy" - only to avoid build break */
  33 #define CFG_SYS_SPI_KERNEL_OFFS      0x150000
  34 #define CFG_SYS_SPI_ARGS_OFFS        0x140000
  35 #define CFG_SYS_SPI_ARGS_SIZE        0x10000
  36
  37 #define CONFIG_MXC_UART_BASE            UART5_BASE
  38
  39 /* I2C Configs */
  40 #define CONFIG_I2C_MULTI_BUS
  41
  42 /* MMC Configs */
  43 #define CFG_SYS_FSL_ESDHC_ADDR  0
  44 #define CFG_SYS_FSL_USDHC_NUM   2
  45
  46 #define PARTS_DEFAULT \
  47         /* Linux partitions */ \
  48         "partitions=" \
  49         "uuid_disk=${uuid_gpt_disk};" \
  50         "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
  51         "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
  52         "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
  53         "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
  54         "name=data,size=-,uuid=${uuid_gpt_data}\0"
  55
  56 #define SWUPDATE_RECOVERY_PROCEDURE \
  57         "echo '#######################';" \
  58         "echo '# RECOVERY SWUupdate  #';" \
  59         "echo '#######################';" \
  60         "echo '#######################';" \
  61         "echo '# GPT verify          #';" \
  62         "if gpt verify mmc ${mmcdev} ${partitions}; then " \
  63                 "echo '# OK !                #';" \
  64         "else " \
  65                 "echo '# FAILED !            #';" \
  66                 "echo '# GPT RESTORATION     #';" \
  67                 "gpt write mmc ${mmcdev} ${partitions};" \
  68         "fi;" \
  69         "echo '#######################';" \
  70         "setenv loadaddr_swu_initramfs 0x14000000;" \
  71         "setenv bootargs console=${console} " \
  72                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
  73                 ":${hostname}::off root=/dev/ram rw;" \
  74         "sf probe;" \
  75         "sf read ${loadaddr} swu-kernel;" \
  76         "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
  77         "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
  78
  79 #define SETUP_BOOTARGS \
  80         "run set_rootfs_part;" \
  81         "setenv bootargs ${bootargs} console=${console} "         \
  82                       "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
  83                       "rootwait rootfstype=ext4 rw; " \
  84         "run set_kernel_part;" \
  85         "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
  86         "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
  87         "setenv fdt_conf imx6q-${board}-${display}.dtb; "
  88
  89 /* All the numbers are in LBAs */
  90 #define __TFTP_UPDATE_KERNEL \
  91         "tftp_mmc_fitImg=" \
  92            "if test ! -n ${kernel_part}; then " \
  93                "setenv kernel_part ${kernel_part_active};" \
  94            "fi;" \
  95            "if tftp ${loadaddr} ${kernel_file}; then " \
  96                "setexpr fw_sz ${filesize} / 0x200; " \
  97                "setexpr fw_sz ${fw_sz} + 1; "  \
  98                "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
  99                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 100            "; fi\0" \
 101
 102 #define TFTP_UPDATE_KERNEL \
 103         "setenv kernel_part ${kernel_part_active};" \
 104         "run tftp_mmc_fitImg;" \
 105         "setenv kernel_part ${kernel_part_backup};" \
 106         "run tftp_mmc_fitImg;" \
 107
 108 #define __TFTP_UPDATE_ROOTFS \
 109         "tftp_mmc_rootfs=" \
 110            "if test ! -n ${rootfs_part}; then " \
 111                "setenv rootfs_part ${rootfs_part_active};" \
 112            "fi;" \
 113            "if tftp ${loadaddr} ${rootfs_file}; then " \
 114                "setexpr fw_sz ${filesize} / 0x200; " \
 115                "setexpr fw_sz ${fw_sz} + 1; "  \
 116                "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
 117                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 118            "; fi\0" \
 119
 120 #define TFTP_UPDATE_ROOTFS \
 121         "setenv rootfs_part ${rootfs_part_active};" \
 122         "run tftp_mmc_rootfs;" \
 123         "run tftp_mmc_rootfs_bkp;" \
 124
 125
 126 #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 127         "tftp_sf_fitImg_SWU=" \
 128             "if tftp ${loadaddr} ${kernel_file}; then " \
 129                 "sf probe;" \
 130                 "sf erase swu-kernel +${filesize};" \
 131                 "sf write ${loadaddr} swu-kernel ${filesize};" \
 132         "; fi\0"          \
 133
 134 #define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 135         "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
 136         "tftp_sf_initramfs_SWU=" \
 137             "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
 138                 "sf probe;" \
 139                 "sf erase swu-initramfs +${filesize};" \
 140                 "sf write ${loadaddr} swu-initramfs ${filesize};" \
 141         "; fi\0"          \
 142
 143 #define TFTP_UPDATE_BOOTLOADER \
 144         "ubootfile=u-boot.img\0" \
 145         "ubootfileSPL=SPL\0" \
 146         "tftp_sf_uboot=" \
 147             "if tftp ${loadaddr} ${ubootfile}; then " \
 148                 "sf probe;" \
 149                 "sf erase u-boot +${filesize};" \
 150                 "sf write ${loadaddr} u-boot ${filesize}" \
 151         "; fi\0"          \
 152         "tftp_sf_SPL="    \
 153             "if tftp ${loadaddr} ${ubootfileSPL}; then " \
 154                 "sf probe;" \
 155                 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
 156                 "sf erase 0x0 +${uboot_SPL_size};" \
 157                 "sf write ${loadaddr} 0x400 ${filesize};" \
 158         "fi\0" \
 159
 160 #define TFTP_UPDATE_SPINOR \
 161         "spinorfile=core-image-lwn-display5.spinor\0" \
 162         "spinorsize=0x2000000\0" \
 163         "tftp_sf_img=" \
 164             "if tftp ${loadaddr} ${spinorfile}; then " \
 165                 "sf probe;" \
 166                 "sf erase 0x0 ${spinorsize};" \
 167                 "sf write ${loadaddr} 0x0 ${filesize};" \
 168         "fi\0" \
 169
 170 #define CONFIG_EXTRA_ENV_SETTINGS         \
 171         PARTS_DEFAULT \
 172         "gpio_recovery=93\0" \
 173         "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
 174         "display=tianma-tm070-800x480\0" \
 175         "board=display5\0" \
 176         "mmcdev=0\0" \
 177         "altbootcmd=run recovery\0" \
 178         "bootdelay=1\0" \
 179         "baudrate=115200\0" \
 180         "ethact=FEC\0" \
 181         "netdev=eth0\0" \
 182         "boot_os=y\0" \
 183         "hostname=display5\0" \
 184         "loadaddr=0x12000000\0" \
 185         "fdtaddr=0x12800000\0" \
 186         "console=ttymxc4,115200 quiet cma=256M\0" \
 187         "fdtfile=imx6q-display5.dtb\0" \
 188         "fdt_high=0xffffffff\0" \
 189         "initrd_high=0xffffffff\0" \
 190         "kernel_file=fitImage\0" \
 191         "fitImg_fw_sz=0x2200\0" \
 192         "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 193         "download_kernel=" \
 194                 "tftpboot ${loadaddr} ${kernel_file};\0" \
 195         "factory_nfs=" \
 196              "setenv ipaddr 192.168.1.102;" \
 197              "setenv gatewayip 192.168.1.1;" \
 198              "setenv netmask 255.255.255.0;" \
 199              "setenv serverip 192.168.1.2;" \
 200              "echo BOOT: FACTORY (LEG);" \
 201              "run boot_nfs\0" \
 202         "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 203         "recovery=" \
 204              "echo BOOT: RECOVERY: SWU;" \
 205              "run boot_swu_recovery\0" \
 206         "boot_tftp=" \
 207         "if run download_kernel; then "   \
 208              "setenv bootargs console=${console} " \
 209              "root=/dev/mmcblk0p2 rootwait;" \
 210              "bootm ${loadaddr} - ${fdtaddr};reset;" \
 211         "fi\0" \
 212         "addip=setenv bootargs ${bootargs} " \
 213         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 214             "${hostname}:eth0:on"         \
 215         "\0"      \
 216         "nfsargs=setenv bootargs " \
 217         "root=/dev/nfs rw "       \
 218         "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
 219         "\0" \
 220         "rootpath=/srv/tftp/DISP5/rootfs\0" \
 221         "boot_nfs=" \
 222         "if run download_kernel; then "   \
 223              "run nfsargs;"       \
 224              "run addip;"         \
 225              "setenv bootargs ${bootargs} console=${console};"    \
 226              "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
 227              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 228         "fi\0" \
 229         "falcon_setup=" \
 230         "if mmc dev ${mmcdev}; then "     \
 231              SETUP_BOOTARGS \
 232              "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
 233              "setexpr fw_sz ${fdtargslen} / 0x200; " \
 234              "setexpr fw_sz ${fw_sz} + 1; "  \
 235              "mmc write ${fdtargsaddr} " \
 236              __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
 237         "fi\0" \
 238         "boot_mmc=" \
 239         "if mmc dev ${mmcdev}; then "     \
 240              SETUP_BOOTARGS \
 241              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 242         "fi\0" \
 243         "set_kernel_part=" \
 244         "if test ${BOOT_FROM} = ACTIVE; then " \
 245              "setenv kernel_part ${kernel_part_active};" \
 246              "echo BOOT: ACTIVE;" \
 247         "else if test ${BOOT_FROM} = BACKUP; then " \
 248              "setenv kernel_part ${kernel_part_backup};" \
 249              "echo BOOT: BACKUP;" \
 250         "else " \
 251              "run recovery;" \
 252         "fi;fi\0" \
 253         "set_rootfs_part=" \
 254         "if test ${BOOT_FROM} = ACTIVE; then " \
 255              "setenv rootfs_part ${rootfs_part_active};" \
 256         "else if test ${BOOT_FROM} = BACKUP; then " \
 257              "setenv rootfs_part ${rootfs_part_backup};" \
 258         "else " \
 259              "run recovery;" \
 260         "fi;fi\0" \
 261         "BOOT_FROM=ACTIVE\0" \
 262         TFTP_UPDATE_BOOTLOADER \
 263         TFTP_UPDATE_SPINOR \
 264         "kernel_part_active=1\0" \
 265         "kernel_part_backup=3\0" \
 266         __TFTP_UPDATE_KERNEL \
 267         "rootfs_part_active=2\0" \
 268         "rootfs_part_backup=4\0" \
 269         "rootfs_file=core-image-lwn-display5.ext4\0" \
 270         "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
 271         __TFTP_UPDATE_ROOTFS \
 272         "tftp_mmc_rootfs_bkp=" \
 273            "setenv rootfs_part ${rootfs_part_backup};" \
 274            "setenv rootfs_file ${rootfs_file_backup};" \
 275            "run tftp_mmc_rootfs\0" \
 276         TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 277         TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 278         "\0" \
 279
 280 /* Miscellaneous configurable options */
 281
 282 #define CONFIG_STANDALONE_LOAD_ADDR     0x10001000
 283
 284 /* Physical Memory Map */
 285 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 286 #define CFG_SYS_SDRAM_BASE              PHYS_SDRAM
 287
 288 #define CFG_SYS_INIT_RAM_ADDR   IRAM_BASE_ADDR
 289 #define CFG_SYS_INIT_RAM_SIZE   IRAM_SIZE
 290
 291 /* ENV config */
 292 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 293 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 294 #endif
 295
 296 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 297 #endif /* __CONFIG_H */