include/configs/display5.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 /* Falcon Mode */
  13 #define CONFIG_CMD_SPL
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15 #define CONFIG_CMD_SPL_WRITE_SIZE       (44 * SZ_1K)
  16
  17 /* Falcon Mode - MMC support */
  18 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x3F00
  19 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  \
  20         (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x100   /* 128KiB */
  22
  23 /*
  24  * display5 SPI-NOR memory layout
  25  *
  26  * The definition can be found in Kconfig's
  27  * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
  28  *
  29  * 0x000000 - 0x020000 : SPI.SPL (128KiB)
  30  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  31  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  32  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
  33  * 0x140000 - 0x540000 : SPI.swupdate-kernel-FIT (4MiB)
  34  * 0x540000 - 0x1540000 : SPI.swupdate-initramfs  (16MiB)
  35  * 0x1540000 - 0x1640000 : SPI.factory  (1MiB)
  36  */
  37
  38 /* SPI Flash Configs */
  39 #if defined(CONFIG_SPL_BUILD)
  40 #undef CONFIG_DM_SPI
  41 #undef CONFIG_DM_SPI_FLASH
  42 #endif
  43
  44 /* Below values are "dummy" - only to avoid build break */
  45 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x150000
  46 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
  47 #define CONFIG_SYS_SPI_ARGS_SIZE        0x10000
  48
  49 #include "imx6_spl.h"
  50
  51 #define CONFIG_CMDLINE_TAG
  52 #define CONFIG_SETUP_MEMORY_TAGS
  53 #define CONFIG_INITRD_TAG
  54 #define CONFIG_REVISION_TAG
  55
  56 /* Size of malloc() pool */
  57 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  58
  59 #define CONFIG_MXC_UART_BASE            UART5_BASE
  60
  61 /* I2C Configs */
  62 #define CONFIG_I2C_MULTI_BUS
  63
  64 /* MMC Configs */
  65 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  66 #define CONFIG_SYS_FSL_USDHC_NUM        2
  67
  68 /* allow to overwrite serial and ethaddr */
  69 #define CONFIG_ENV_OVERWRITE
  70 #define CONFIG_BAUDRATE                 115200
  71
  72 #ifndef CONFIG_BOOTCOMMAND
  73 #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
  74              "run recovery;" \
  75         "else if test ${BOOT_FROM} = FACTORY; then " \
  76              "run factory_nfs;" \
  77         "else " \
  78              "run boot_mmc;" \
  79         "fi;fi"
  80 #endif
  81
  82 #define PARTS_DEFAULT \
  83         /* Linux partitions */ \
  84         "partitions=" \
  85         "uuid_disk=${uuid_gpt_disk};" \
  86         "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
  87         "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
  88         "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
  89         "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
  90         "name=data,size=-,uuid=${uuid_gpt_data}\0"
  91
  92 #define SWUPDATE_RECOVERY_PROCEDURE \
  93         "echo '#######################';" \
  94         "echo '# RECOVERY SWUupdate  #';" \
  95         "echo '#######################';" \
  96         "echo '#######################';" \
  97         "echo '# GPT verify          #';" \
  98         "if gpt verify mmc ${mmcdev} ${partitions}; then " \
  99                 "echo '# OK !                #';" \
 100         "else " \
 101                 "echo '# FAILED !            #';" \
 102                 "echo '# GPT RESTORATION     #';" \
 103                 "gpt write mmc ${mmcdev} ${partitions};" \
 104         "fi;" \
 105         "echo '#######################';" \
 106         "setenv loadaddr_swu_initramfs 0x14000000;" \
 107         "setenv bootargs console=${console} " \
 108                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
 109                 ":${hostname}::off root=/dev/ram rw;" \
 110         "sf probe;" \
 111         "sf read ${loadaddr} swu-kernel;" \
 112         "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
 113         "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
 114
 115 #define SETUP_BOOTARGS \
 116         "run set_rootfs_part;" \
 117         "setenv bootargs ${bootargs} console=${console} "         \
 118                       "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
 119                       "rootwait rootfstype=ext4 rw; " \
 120         "run set_kernel_part;" \
 121         "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 122         "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
 123         "setenv fdt_conf imx6q-${board}-${display}.dtb; "
 124
 125 /* All the numbers are in LBAs */
 126 #define __TFTP_UPDATE_KERNEL \
 127         "tftp_mmc_fitImg=" \
 128            "if test ! -n ${kernel_part}; then " \
 129                "setenv kernel_part ${kernel_part_active};" \
 130            "fi;" \
 131            "if tftp ${loadaddr} ${kernel_file}; then " \
 132                "setexpr fw_sz ${filesize} / 0x200; " \
 133                "setexpr fw_sz ${fw_sz} + 1; "  \
 134                "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 135                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 136            "; fi\0" \
 137
 138 #define TFTP_UPDATE_KERNEL \
 139         "setenv kernel_part ${kernel_part_active};" \
 140         "run tftp_mmc_fitImg;" \
 141         "setenv kernel_part ${kernel_part_backup};" \
 142         "run tftp_mmc_fitImg;" \
 143
 144 #define __TFTP_UPDATE_ROOTFS \
 145         "tftp_mmc_rootfs=" \
 146            "if test ! -n ${rootfs_part}; then " \
 147                "setenv rootfs_part ${rootfs_part_active};" \
 148            "fi;" \
 149            "if tftp ${loadaddr} ${rootfs_file}; then " \
 150                "setexpr fw_sz ${filesize} / 0x200; " \
 151                "setexpr fw_sz ${fw_sz} + 1; "  \
 152                "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
 153                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 154            "; fi\0" \
 155
 156 #define TFTP_UPDATE_ROOTFS \
 157         "setenv rootfs_part ${rootfs_part_active};" \
 158         "run tftp_mmc_rootfs;" \
 159         "run tftp_mmc_rootfs_bkp;" \
 160
 161
 162 #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 163         "tftp_sf_fitImg_SWU=" \
 164             "if tftp ${loadaddr} ${kernel_file}; then " \
 165                 "sf probe;" \
 166                 "sf erase swu-kernel +${filesize};" \
 167                 "sf write ${loadaddr} swu-kernel ${filesize};" \
 168         "; fi\0"          \
 169
 170 #define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 171         "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
 172         "tftp_sf_initramfs_SWU=" \
 173             "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
 174                 "sf probe;" \
 175                 "sf erase swu-initramfs +${filesize};" \
 176                 "sf write ${loadaddr} swu-initramfs ${filesize};" \
 177         "; fi\0"          \
 178
 179 #define TFTP_UPDATE_BOOTLOADER \
 180         "ubootfile=u-boot.img\0" \
 181         "ubootfileSPL=SPL\0" \
 182         "tftp_sf_uboot=" \
 183             "if tftp ${loadaddr} ${ubootfile}; then " \
 184                 "sf probe;" \
 185                 "sf erase u-boot +${filesize};" \
 186                 "sf write ${loadaddr} u-boot ${filesize}" \
 187         "; fi\0"          \
 188         "tftp_sf_SPL="    \
 189             "if tftp ${loadaddr} ${ubootfileSPL}; then " \
 190                 "sf probe;" \
 191                 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
 192                 "sf erase 0x0 +${uboot_SPL_size};" \
 193                 "sf write ${loadaddr} 0x400 ${filesize};" \
 194         "fi\0" \
 195
 196 #define TFTP_UPDATE_SPINOR \
 197         "spinorfile=core-image-lwn-display5.spinor\0" \
 198         "spinorsize=0x2000000\0" \
 199         "tftp_sf_img=" \
 200             "if tftp ${loadaddr} ${spinorfile}; then " \
 201                 "sf probe;" \
 202                 "sf erase 0x0 ${spinorsize};" \
 203                 "sf write ${loadaddr} 0x0 ${filesize};" \
 204         "fi\0" \
 205
 206 #define CONFIG_EXTRA_ENV_SETTINGS         \
 207         PARTS_DEFAULT \
 208         "gpio_recovery=93\0" \
 209         "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
 210         "display=tianma-tm070-800x480\0" \
 211         "board=display5\0" \
 212         "mmcdev=0\0" \
 213         "altbootcmd=run recovery\0" \
 214         "bootdelay=1\0" \
 215         "baudrate=115200\0" \
 216         "bootcmd=" CONFIG_BOOTCOMMAND "\0" \
 217         "ethact=FEC\0" \
 218         "netdev=eth0\0" \
 219         "boot_os=y\0" \
 220         "hostname=display5\0" \
 221         "loadaddr=0x12000000\0" \
 222         "fdtaddr=0x12800000\0" \
 223         "console=ttymxc4,115200 quiet cma=256M\0" \
 224         "fdtfile=imx6q-display5.dtb\0" \
 225         "fdt_high=0xffffffff\0" \
 226         "initrd_high=0xffffffff\0" \
 227         "kernel_file=fitImage\0" \
 228         "fitImg_fw_sz=0x2200\0" \
 229         "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 230         "download_kernel=" \
 231                 "tftpboot ${loadaddr} ${kernel_file};\0" \
 232         "factory_nfs=" \
 233              "setenv ipaddr 192.168.1.102;" \
 234              "setenv gatewayip 192.168.1.1;" \
 235              "setenv netmask 255.255.255.0;" \
 236              "setenv serverip 192.168.1.2;" \
 237              "echo BOOT: FACTORY (LEG);" \
 238              "run boot_nfs\0" \
 239         "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 240         "recovery=" \
 241              "echo BOOT: RECOVERY: SWU;" \
 242              "run boot_swu_recovery\0" \
 243         "boot_tftp=" \
 244         "if run download_kernel; then "   \
 245              "setenv bootargs console=${console} " \
 246              "root=/dev/mmcblk0p2 rootwait;" \
 247              "bootm ${loadaddr} - ${fdtaddr};reset;" \
 248         "fi\0" \
 249         "addip=setenv bootargs ${bootargs} " \
 250         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 251             "${hostname}:eth0:on"         \
 252         "\0"      \
 253         "nfsargs=setenv bootargs " \
 254         "root=/dev/nfs rw "       \
 255         "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
 256         "\0" \
 257         "rootpath=/srv/tftp/DISP5/rootfs\0" \
 258         "boot_nfs=" \
 259         "if run download_kernel; then "   \
 260              "run nfsargs;"       \
 261              "run addip;"         \
 262              "setenv bootargs ${bootargs} console=${console};"    \
 263              "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
 264              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 265         "fi\0" \
 266         "falcon_setup=" \
 267         "if mmc dev ${mmcdev}; then "     \
 268              SETUP_BOOTARGS \
 269              "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
 270              "setexpr fw_sz ${fdtargslen} / 0x200; " \
 271              "setexpr fw_sz ${fw_sz} + 1; "  \
 272              "mmc write ${fdtargsaddr} " \
 273              __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
 274         "fi\0" \
 275         "boot_mmc=" \
 276         "if mmc dev ${mmcdev}; then "     \
 277              SETUP_BOOTARGS \
 278              "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
 279         "fi\0" \
 280         "set_kernel_part=" \
 281         "if test ${BOOT_FROM} = ACTIVE; then " \
 282              "setenv kernel_part ${kernel_part_active};" \
 283              "echo BOOT: ACTIVE;" \
 284         "else if test ${BOOT_FROM} = BACKUP; then " \
 285              "setenv kernel_part ${kernel_part_backup};" \
 286              "echo BOOT: BACKUP;" \
 287         "else " \
 288              "run recovery;" \
 289         "fi;fi\0" \
 290         "set_rootfs_part=" \
 291         "if test ${BOOT_FROM} = ACTIVE; then " \
 292              "setenv rootfs_part ${rootfs_part_active};" \
 293         "else if test ${BOOT_FROM} = BACKUP; then " \
 294              "setenv rootfs_part ${rootfs_part_backup};" \
 295         "else " \
 296              "run recovery;" \
 297         "fi;fi\0" \
 298         "BOOT_FROM=ACTIVE\0" \
 299         TFTP_UPDATE_BOOTLOADER \
 300         TFTP_UPDATE_SPINOR \
 301         "kernel_part_active=1\0" \
 302         "kernel_part_backup=3\0" \
 303         __TFTP_UPDATE_KERNEL \
 304         "rootfs_part_active=2\0" \
 305         "rootfs_part_backup=4\0" \
 306         "rootfs_file=core-image-lwn-display5.ext4\0" \
 307         "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
 308         __TFTP_UPDATE_ROOTFS \
 309         "tftp_mmc_rootfs_bkp=" \
 310            "setenv rootfs_part ${rootfs_part_backup};" \
 311            "setenv rootfs_file ${rootfs_file_backup};" \
 312            "run tftp_mmc_rootfs\0" \
 313         TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 314         TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 315         "\0" \
 316
 317 /* Miscellaneous configurable options */
 318 #undef CONFIG_SYS_CBSIZE
 319 #define CONFIG_SYS_CBSIZE               2048
 320
 321 /* Print Buffer Size */
 322 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 323                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 324 #define CONFIG_SYS_MAXARGS              32
 325 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 326
 327 #define CONFIG_STANDALONE_LOAD_ADDR     0x10001000
 328 #define CONFIG_SYS_HZ                   1000
 329
 330 /* Physical Memory Map */
 331 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 332 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 333
 334 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 335 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 336
 337 #define CONFIG_SYS_INIT_SP_OFFSET \
 338         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 339 #define CONFIG_SYS_INIT_SP_ADDR \
 340         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 341
 342 /* Watchdog */
 343 #if defined(CONFIG_SPL_BUILD)
 344 #undef CONFIG_WDT
 345 #undef CONFIG_WATCHDOG
 346 #define CONFIG_HW_WATCHDOG
 347 #endif
 348
 349 /* ENV config */
 350 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 351 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 352 #endif
 353
 354 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 355 #endif /* __CONFIG_H */