include/configs/digsy_mtc.h

   1 /*
   2  * (C) Copyright 2003-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2005-2007
   6  * Modified for InterControl digsyMTC MPC5200 board by
   7  * Frank Bodammer, GCD Hard- & Software GmbH,
   8  *                 frank.bodammer@gcd-solutions.de
   9  *
  10  * (C) Copyright 2009 Semihalf
  11  * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 #ifndef __CONFIG_H
  17 #define __CONFIG_H
  18
  19 /*
  20  * High Level Configuration Options
  21  */
  22
  23 #define CONFIG_MPC5200          1       /* This is an MPC5200 CPU */
  24 #define CONFIG_DIGSY_MTC        1       /* ... on InterControl digsyMTC board */
  25
  26 /*
  27  * Valid values for CONFIG_SYS_TEXT_BASE are:
  28  * 0xFFF00000   boot high (standard configuration)
  29  * 0xFE000000   boot low
  30  * 0x00100000   boot from RAM (for testing only)
  31  */
  32 #ifndef CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_SYS_TEXT_BASE    0xFFF00000      /* Standard: boot high */
  34 #endif
  35
  36 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000
  37
  38 #define CONFIG_SYS_CACHELINE_SIZE       32
  39
  40 /*
  41  * Serial console configuration
  42  */
  43 #define CONFIG_PSC_CONSOLE      4       /* console is on PSC4  */
  44 #define CONFIG_BAUDRATE         115200  /* ... at 115200  bps  */
  45 #define CONFIG_SYS_BAUDRATE_TABLE       \
  46         { 9600, 19200, 38400, 57600, 115200, 230400 }
  47
  48 /*
  49  * PCI Mapping:
  50  * 0x40000000 - 0x4fffffff - PCI Memory
  51  * 0x50000000 - 0x50ffffff - PCI IO Space
  52  */
  53 #define CONFIG_PCI              1
  54 #define CONFIG_PCI_PNP          1
  55 #define CONFIG_PCI_SCAN_SHOW    1
  56 #define CONFIG_PCI_BOOTDELAY    250
  57
  58 #define CONFIG_PCI_MEM_BUS      0x40000000
  59 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  60 #define CONFIG_PCI_MEM_SIZE     0x10000000
  61
  62 #define CONFIG_PCI_IO_BUS       0x50000000
  63 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  64 #define CONFIG_PCI_IO_SIZE      0x01000000
  65
  66 /*
  67  *  Partitions
  68  */
  69 #define CONFIG_DOS_PARTITION
  70 #define CONFIG_BZIP2
  71
  72 /*
  73  * Video
  74  */
  75
  76 #ifdef CONFIG_VIDEO
  77 #define CONFIG_VIDEO_MB862xx
  78 #define CONFIG_VIDEO_MB862xx_ACCEL
  79 #define CONFIG_VIDEO_CORALP
  80 #define CONFIG_VIDEO_LOGO
  81 #define CONFIG_VIDEO_BMP_LOGO
  82 #define CONFIG_SPLASH_SCREEN
  83 #define CONFIG_VIDEO_BMP_GZIP
  84 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)       /* decompressed img */
  85
  86 /* Coral-PA clock frequency, geo and other both 133MHz */
  87 #define CONFIG_SYS_MB862xx_CCF  0x00050000
  88 /* Video SDRAM parameters */
  89 #define CONFIG_SYS_MB862xx_MMR  0x11d7fa72
  90 #endif
  91
  92 /*
  93  * Command line configuration.
  94  */
  95 #ifdef CONFIG_VIDEO
  96 #define CONFIG_CMD_BMP
  97 #endif
  98 #define CONFIG_CMD_DATE
  99 #define CONFIG_CMD_DIAG
 100 #define CONFIG_CMD_EEPROM
 101 #define CONFIG_CMD_IDE
 102 #define CONFIG_CMD_IRQ
 103 #define CONFIG_CMD_PCI
 104 #define CONFIG_CMD_REGINFO
 105 #define CONFIG_CMD_SAVES
 106
 107 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
 108 #define CONFIG_SYS_LOWBOOT      1
 109 #endif
 110
 111 /*
 112  * Autobooting
 113  */
 114
 115 #undef  CONFIG_BOOTARGS
 116
 117 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 118         "fw_image=digsyMPC.img\0"                                       \
 119         "mtcb_start=mtc led diag orange; run mtcb_1\0"                  \
 120         "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; "           \
 121                 "do mtc led $x; done\0"                                 \
 122         "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; "       \
 123                 "else run mtcb_fw; fi\0"                                \
 124         "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; "           \
 125                 "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0"   \
 126         "mtcb_update=mtc led user1 orange;"                             \
 127                 "while mtc key; do ; done; run mtcb_2;\0"               \
 128         "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0"     \
 129         "mtcb_usb1=if fatload usb 0 400000 script.img; "                \
 130                 "then run mtcb_doscript; else run mtcb_usb2; fi\0"      \
 131         "mtcb_usb2=if fatload usb 0 400000 $fw_image; "                 \
 132                 "then run mtcb_dousb; else run mtcb_ide; fi\0"          \
 133         "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; "      \
 134                 "run mtcb_wait_flickr mtcb_ds_1;\0"                     \
 135         "mtcb_ds_1=if imi 400000; then mtc led usbbusy; "               \
 136                 "source 400000; else run mtcb_error; fi\0"              \
 137         "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0"     \
 138         "mtcb_du_1=if imi 400000; then run mtcb_du_2; "                 \
 139                 "else run mtcb_error; fi\0"                             \
 140         "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; "         \
 141                 "run mtcb_checkfw\0"                                    \
 142         "mtcb_checkfw=if imi ff000000; then run mtcb_success; "         \
 143                 "else run mtcb_error; fi\0"                             \
 144         "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
 145         "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0"            \
 146         "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
 147         "mtcb_uledflckr=mtc led user1 orange 11\0"                      \
 148         "mtcb_error=mtc led user1 red\0"                                \
 149         "mtcb_clear=erase ff000000 ff0fffff\0"                          \
 150         "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0"                  \
 151         "mtcb_success=mtc led user1 green\0"                            \
 152         "mtcb_ide=if fatload ide 0 400000 $fw_image;"                   \
 153                 "then run mtcb_doide; else run mtcb_error; fi\0"        \
 154         "mtcb_doide=mtc led user2 green 1;"                             \
 155                 "run mtcb_wait_flickr mtcb_di_1;\0"                     \
 156         "mtcb_di_1=if imi 400000; then run mtcb_di_2;"                  \
 157                 "else run mtcb_error; fi\0"                             \
 158         "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0"        \
 159         "ramdisk_num_sector=16\0"                                       \
 160         "flash_base=ff000000\0"                                         \
 161         "flashdisk_size=e00000\0"                                       \
 162         "env_sector=fff60000\0"                                         \
 163         "flashdisk_start=ff100000\0"                                    \
 164         "load_cmd=tftp 400000 digsyMPC.img\0"                           \
 165         "clear_cmd=erase ff000000 ff0fffff\0"                           \
 166         "flash_cmd=cp.b 400000 ff000000 ${filesize}\0"                  \
 167         "update_cmd=run load_cmd; "                                     \
 168         "iminfo 400000; "                                               \
 169         "run clear_cmd flash_cmd; "                                     \
 170         "iminfo ff000000\0"                                             \
 171         "spi_driver=yes\0"                                              \
 172         "spi_watchdog=no\0"                                             \
 173         "ftps_start=yes\0"                                              \
 174         "ftps_user1=admin\0"                                            \
 175         "ftps_pass1=admin\0"                                            \
 176         "ftps_base1=/\0"                                                \
 177         "ftps_home1=/\0"                                                \
 178         "plc_sio_srv=no\0"                                              \
 179         "plc_sio_baud=57600\0"                                          \
 180         "plc_sio_parity=no\0"                                           \
 181         "plc_sio_stop=1\0"                                              \
 182         "plc_sio_com=2\0"                                               \
 183         "plc_eth_srv=yes\0"                                             \
 184         "plc_eth_port=1200\0"                                           \
 185         "plc_root=/ide/\0"                                              \
 186         "diag_level=0\0"                                                \
 187         "webvisu=no\0"                                                  \
 188         "plc_can1_routing=no\0"                                         \
 189         "plc_can1_baudrate=250\0"                                       \
 190         "plc_can2_routing=no\0"                                         \
 191         "plc_can2_baudrate=250\0"                                       \
 192         "plc_can3_routing=no\0"                                         \
 193         "plc_can3_baudrate=250\0"                                       \
 194         "plc_can4_routing=no\0"                                         \
 195         "plc_can4_baudrate=250\0"                                       \
 196         "netdev=eth0\0"                                                 \
 197         "console=ttyPSC0\0"                                             \
 198         "kernel_addr_r=400000\0"                                        \
 199         "fdt_addr_r=600000\0"                                           \
 200         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 201         "nfsroot=${serverip}:${rootpath}\0"                             \
 202         "addip=setenv bootargs ${bootargs} "                            \
 203         "ip=${ipaddr}:${serverip}:${gatewayip}:"                        \
 204         "${netmask}:${hostname}:${netdev}:off panic=1\0"                \
 205         "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
 206         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 207         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 208                 "tftp ${fdt_addr_r} ${fdt_file};"                       \
 209                 "run nfsargs addip addcons;"                            \
 210                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 211         "load=tftp 200000 ${u-boot}\0"                                  \
 212         "update=protect off FFF00000 +${filesize};"                     \
 213                 "erase FFF00000 +${filesize};"                          \
 214                 "cp.b 200000 FFF00000 ${filesize};"                     \
 215                 "protect on FFF00000 +${filesize}\0"                    \
 216         ""
 217
 218 #define CONFIG_BOOTCOMMAND      "run mtcb_start"
 219
 220 /*
 221  * SPI configuration
 222  */
 223 #define CONFIG_HARD_SPI         1
 224 #define CONFIG_MPC52XX_SPI      1
 225
 226 /*
 227  * I2C configuration
 228  */
 229 #define CONFIG_HARD_I2C         1
 230 #define CONFIG_SYS_I2C_MODULE   1
 231 #define CONFIG_SYS_I2C_SPEED    100000
 232 #define CONFIG_SYS_I2C_SLAVE    0x7F
 233
 234 /*
 235  * EEPROM configuration
 236  */
 237 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 238 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 239 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 240 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   70
 241
 242 /*
 243  * RTC configuration
 244  */
 245 #if defined(CONFIG_DIGSY_REV5)
 246 #define CONFIG_SYS_I2C_RTC_ADDR 0x56
 247 #define CONFIG_RTC_RV3029
 248 /* Enable 5k Ohm trickle charge resistor */
 249 #define CONFIG_SYS_RV3029_TCR   0x20
 250 #else
 251 #define CONFIG_RTC_DS1337
 252 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 253 #define CONFIG_SYS_DS1339_TCR_VAL       0xAB    /* diode + 4k resistor */
 254 #endif
 255
 256 /*
 257  * Flash configuration
 258  */
 259 #define CONFIG_SYS_FLASH_CFI            1
 260 #define CONFIG_FLASH_CFI_DRIVER 1
 261
 262 #if defined(CONFIG_DIGSY_REV5)
 263 #define CONFIG_SYS_FLASH_BASE           0xFE000000
 264 #define CONFIG_SYS_FLASH_BASE_CS1       0xFC000000
 265 #define CONFIG_SYS_MAX_FLASH_BANKS      2
 266 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE, \
 267                                         CONFIG_SYS_FLASH_BASE_CS1}
 268 #define CONFIG_SYS_UPDATE_FLASH_SIZE
 269 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 270 #else
 271 #define CONFIG_SYS_FLASH_BASE           0xFF000000
 272 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 273 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 274 #endif
 275
 276 #define CONFIG_SYS_MAX_FLASH_SECT       256
 277 #define CONFIG_FLASH_16BIT
 278 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
 279 #define CONFIG_SYS_FLASH_SIZE   0x01000000
 280 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 281 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
 282
 283 #define OF_CPU                  "PowerPC,5200@0"
 284 #define OF_SOC                  "soc5200@f0000000"
 285 #define OF_TBCLK                (bd->bi_busfreq / 4)
 286
 287 #define CONFIG_BOARD_EARLY_INIT_R
 288 #define CONFIG_MISC_INIT_R
 289
 290 /*
 291  * Environment settings
 292  */
 293 #define CONFIG_ENV_IS_IN_FLASH  1
 294 #if defined(CONFIG_LOWBOOT)
 295 #define CONFIG_ENV_ADDR         0xFF060000
 296 #else   /* CONFIG_LOWBOOT */
 297 #define CONFIG_ENV_ADDR         0xFFF60000
 298 #endif  /* CONFIG_LOWBOOT */
 299 #define CONFIG_ENV_SIZE         0x10000
 300 #define CONFIG_ENV_SECT_SIZE    0x20000
 301 #define CONFIG_ENV_OVERWRITE    1
 302
 303 /*
 304  * Memory map
 305  */
 306 #define CONFIG_SYS_MBAR         0xF0000000
 307 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 308 #if !defined(CONFIG_SYS_LOWBOOT)
 309 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 310 #else
 311 #define CONFIG_SYS_DEFAULT_MBAR 0xF0000000
 312 #endif
 313
 314 /*
 315  *  Use SRAM until RAM will be available
 316  */
 317 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 318 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE
 319
 320 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 321         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 322 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 323
 324 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 325 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 326 #define CONFIG_SYS_RAMBOOT              1
 327 #endif
 328
 329 #define CONFIG_SYS_MONITOR_LEN  (256 << 10)
 330 #define CONFIG_SYS_MALLOC_LEN   (4096 << 10)
 331 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)
 332
 333 /*
 334  * Ethernet configuration
 335  */
 336 #define CONFIG_MPC5xxx_FEC      1
 337 #define CONFIG_MPC5xxx_FEC_MII100
 338 #if defined(CONFIG_DIGSY_REV5)
 339 #define CONFIG_PHY_ADDR         0x01
 340 #else
 341 #define CONFIG_PHY_ADDR         0x00
 342 #endif
 343 #define CONFIG_PHY_RESET_DELAY  1000
 344
 345 #define CONFIG_NETCONSOLE               /* include NetConsole support   */
 346
 347 /*
 348  * GPIO configuration
 349  * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
 350  *  Bit 0   (mask 0x80000000) : 0x1
 351  * SPI on Tmr2/3/4/5 pins
 352  *  Bit 2:3 (mask 0x30000000) : 0x2
 353  * ATA cs0/1 on csb_4/5
 354  *  Bit 6:7 (mask 0x03000000) : 0x2
 355  * Ethernet 100Mbit with MD
 356  *  Bits 12:15 (mask 0x000f0000): 0x5
 357  * USB - Two UARTs
 358  *  Bits 18:19 (mask 0x00003000) : 0x2
 359  * PSC3 - USB2 on PSC3
 360  *  Bits 20:23 (mask 0x00000f00) : 0x1
 361  * PSC2 - CAN1&2 on PSC2 pins
 362  *  Bits 25:27 (mask 0x00000070) : 0x1
 363  * PSC1 - AC97 functionality
 364  *  Bits 29:31 (mask 0x00000007) : 0x2
 365  */
 366 #define CONFIG_SYS_GPS_PORT_CONFIG      0xA2552112
 367
 368 /*
 369  * Miscellaneous configurable options
 370  */
 371 #define CONFIG_SYS_LONGHELP
 372 #define CONFIG_AUTO_COMPLETE    1
 373 #define CONFIG_CMDLINE_EDITING  1
 374
 375 #define CONFIG_MX_CYCLIC        1
 376
 377 #define CONFIG_SYS_CBSIZE               1024
 378 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 379 #define CONFIG_SYS_MAXARGS              32
 380 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 381
 382 #define CONFIG_SYS_ALT_MEMTEST
 383 #define CONFIG_SYS_MEMTEST_SCRATCH      0x00001000
 384 #define CONFIG_SYS_MEMTEST_START        0x00010000
 385 #define CONFIG_SYS_MEMTEST_END          0x019fffff
 386
 387 #define CONFIG_SYS_LOAD_ADDR            0x00100000
 388
 389 /*
 390  * Various low-level settings
 391  */
 392 #define CONFIG_SYS_SDRAM_CS1            1
 393 #define CONFIG_SYS_XLB_PIPELINING       1
 394
 395 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 396 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 397
 398 #if defined(CONFIG_SYS_LOWBOOT)
 399 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 400 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 401 #define CONFIG_SYS_BOOTCS_CFG           0x0002DD00
 402 #endif
 403
 404 #define CONFIG_SYS_CS4_START            0x60000000
 405 #define CONFIG_SYS_CS4_SIZE             0x1000
 406 #define CONFIG_SYS_CS4_CFG              0x0008FC00
 407
 408 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 409 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 410 #define CONFIG_SYS_CS0_CFG              0x0002DD00
 411
 412 #if defined(CONFIG_DIGSY_REV5)
 413 #define CONFIG_SYS_CS1_START            CONFIG_SYS_FLASH_BASE_CS1
 414 #define CONFIG_SYS_CS1_SIZE             CONFIG_SYS_FLASH_SIZE
 415 #define CONFIG_SYS_CS1_CFG              0x0002DD00
 416 #endif
 417
 418 #define CONFIG_SYS_CS_BURST             0x00000000
 419 #define CONFIG_SYS_CS_DEADCYCLE 0x11111111
 420
 421 #if !defined(CONFIG_SYS_LOWBOOT)
 422 #define CONFIG_SYS_RESET_ADDRESS        0xfff00100
 423 #else
 424 #define CONFIG_SYS_RESET_ADDRESS        0xff000100
 425 #endif
 426
 427 /*
 428  * USB
 429  */
 430 #define CONFIG_USB_OHCI_NEW
 431 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 432
 433 #define CONFIG_USB_CLOCK        0x00013333
 434 #define CONFIG_USB_CONFIG       0x00002000
 435
 436 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 437 #define CONFIG_SYS_USB_OHCI_REGS_BASE   MPC5XXX_USB
 438 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "mpc5200"
 439 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 440
 441 /*
 442  * IDE/ATA
 443  */
 444 #define CONFIG_IDE_RESET
 445 #define CONFIG_IDE_PREINIT
 446
 447 #define CONFIG_SYS_ATA_CS_ON_I2C2
 448 #define CONFIG_SYS_IDE_MAXBUS           1
 449 #define CONFIG_SYS_IDE_MAXDEVICE        1
 450
 451 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 452 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 453 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 454 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 455 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 456 #define CONFIG_SYS_ATA_STRIDE           4
 457
 458 #define CONFIG_ATAPI            1
 459 #define CONFIG_LBA48            1
 460
 461 #endif /* __CONFIG_H */