1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2006-2008
5 * Richard Woodruff <r-woodruff2@ti.com>
6 * Syed Mohammed Khasim <x0khasim@ti.com>
9 * Frederik Kriewitz <frederik@kriewitz.eu>
11 * Configuration settings for the DevKit8000 board.
17 /* High Level Configuration Options */
18 #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000
21 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
22 * 64 bytes before this address should be set aside for u-boot.img's
23 * header. That is 0x800FFFC0--0x80100000 should not be used for any
27 #define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/
28 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
30 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
31 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
33 /* Physical Memory Map */
34 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
36 #include <configs/ti_omap3_common.h>
38 #define CONFIG_MISC_INIT_R
40 #define CONFIG_REVISION_TAG 1
42 /* Size of malloc() pool */
43 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
45 #undef CONFIG_SYS_MALLOC_LEN
46 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
48 /* Hardware drivers */
50 #define CONFIG_NET_RETRY_COUNT 20
51 #define CONFIG_DRIVER_DM9000 1
52 #define CONFIG_DM9000_BASE 0x2c000000
53 #define DM9000_IO CONFIG_DM9000_BASE
54 #define DM9000_DATA (CONFIG_DM9000_BASE + 0x400)
55 #define CONFIG_DM9000_USE_16BIT 1
56 #define CONFIG_DM9000_NO_SROM 1
57 #undef CONFIG_DM9000_DEBUG
60 #define CONFIG_TWL4030_LED 1
64 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
66 #define CONFIG_JFFS2_NAND
67 /* nand device jffs2 lives on */
68 #define CONFIG_JFFS2_DEV "nand0"
69 /* start of jffs2 partition */
70 #define CONFIG_JFFS2_PART_OFFSET 0x680000
71 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
74 /* BOOTP/DHCP options */
75 #define CONFIG_BOOTP_NISDOMAIN
76 #define CONFIG_BOOTP_BOOTFILESIZE
77 #define CONFIG_BOOTP_DNS2
78 #define CONFIG_BOOTP_SEND_HOSTNAME
79 #define CONFIG_BOOTP_TIMEOFFSET
80 #undef CONFIG_BOOTP_VENDOREX
82 /* Environment information */
83 #define CONFIG_EXTRA_ENV_SETTINGS \
84 "loadaddr=0x82000000\0" \
85 "console=ttyO2,115200n8\0" \
88 "dvimode=1024x768MR-16@60\0" \
89 "defaultdisplay=dvi\0" \
90 "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
93 "setenv bootargs console=${console} " \
95 "omapfb.mode=dvi:${dvimode} " \
96 "omapdss.def_disp=${defaultdisplay}\0" \
99 "setenv bootargs ${bootargs} " \
100 "root=/dev/mmcblk0p2 " \
105 "setenv bootargs ${bootargs} " \
106 "omapfb.mode=dvi:${dvimode} " \
107 "omapdss.def_disp=${defaultdisplay} " \
108 "root=/dev/mtdblock4 " \
109 "rootfstype=jffs2 " \
113 "setenv bootargs ${bootargs} " \
115 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
116 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
119 "dnsip2=${dnsip2}\0" \
120 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
121 "bootscript=echo Running bootscript from mmc ...; " \
122 "source ${loadaddr}\0" \
123 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
124 "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
125 "mmcboot=echo Booting from mmc ...; " \
127 "bootm ${loadaddr}\0" \
128 "nandboot=echo Booting from nand ...; " \
130 "nand read ${loadaddr} 280000 400000; " \
131 "bootm ${loadaddr}\0" \
132 "netboot=echo Booting from network ...; " \
133 "dhcp ${loadaddr}; " \
135 "bootm ${loadaddr}\0" \
136 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
137 "if run loadbootscript; then " \
140 "if run loaduimage; then " \
142 "else run nandboot; " \
145 "else run nandboot; fi\0"
147 #define CONFIG_BOOTCOMMAND "run autoboot"
149 /* Boot Argument Buffer Size */
150 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000)
151 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
152 0x01000000) /* 16MB */
154 /* NAND and environment organization */
156 #define CONFIG_ENV_OFFSET 0x260000
159 #define CONFIG_SYS_SRAM_START 0x40200000
160 #define CONFIG_SYS_SRAM_SIZE 0x10000
162 /* Defines for SPL */
164 #undef CONFIG_SPL_TEXT_BASE
165 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
167 /* NAND boot config */
168 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
169 #define CONFIG_SYS_NAND_PAGE_COUNT 64
170 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
171 #define CONFIG_SYS_NAND_OOBSIZE 64
172 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
173 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
174 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
177 #define CONFIG_SYS_NAND_ECCSIZE 512
178 #define CONFIG_SYS_NAND_ECCBYTES 3
179 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
181 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
182 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000
184 /* SPL OS boot options */
185 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
187 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
188 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
189 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
190 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
191 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */
192 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */
194 #undef CONFIG_SYS_SPL_ARGS_ADDR
195 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)
197 #endif /* __CONFIG_H */