1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
6 #ifndef _CONFIG_DB_88F6820_GP_H
7 #define _CONFIG_DB_88F6820_GP_H
10 * High Level Configuration Options (easy to change)
14 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
17 * SATA/SCSI/AHCI configuration
19 #define CONFIG_SCSI_AHCI_PLAT
20 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
21 #define CONFIG_SYS_SCSI_MAX_LUN 1
22 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
23 CONFIG_SYS_SCSI_MAX_LUN)
25 /* USB/EHCI configuration */
26 #define CONFIG_EHCI_IS_TDI
28 /* Environment in SPI NOR flash */
30 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
33 #ifndef CONFIG_SPL_BUILD
34 #define CONFIG_PCI_SCAN_SHOW
37 /* Keep device tree and initrd in lower memory so the kernel can access them */
38 #define CONFIG_EXTRA_ENV_SETTINGS \
39 "fdt_high=0x10000000\0" \
40 "initrd_high=0x10000000\0"
44 * Select the boot device here
46 * Currently supported are:
47 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
48 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
50 #define SPL_BOOT_SPI_NOR_FLASH 1
51 #define SPL_BOOT_SDIO_MMC_CARD 2
52 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
55 #define CONFIG_SPL_SIZE (140 << 10)
56 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
58 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
59 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
61 #ifdef CONFIG_SPL_BUILD
62 #define CONFIG_SYS_MALLOC_SIMPLE
65 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
66 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
68 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
69 /* SPL related MMC defines */
70 #ifdef CONFIG_SPL_BUILD
71 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
76 * mv-common.h should be defined after CMD configs since it used them
77 * to enable certain macros
79 #include "mv-common.h"
81 #endif /* _CONFIG_DB_88F6820_GP_H */