1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
6 #ifndef _CONFIG_DB_88F6720_H
7 #define _CONFIG_DB_88F6720_H
10 * High Level Configuration Options (easy to change)
14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
15 * for DDR ECC byte filling in the SPL before loading the main
20 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
21 #define CONFIG_SYS_I2C_SLAVE 0x0
22 #define CONFIG_SYS_I2C_SPEED 100000
24 /* USB/EHCI configuration */
25 #define CONFIG_EHCI_IS_TDI
26 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
28 /* Environment in SPI NOR flash */
30 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
33 * mv-common.h should be defined after CMD configs since it used them
34 * to enable certain macros
36 #include "mv-common.h"
39 * Memory layout while starting into the bin_hdr via the
42 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
43 * 0x4000.4030 bin_hdr start address
44 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
45 * 0x4007.fffc BootROM stack top
47 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
48 * L2 cache thus cannot be used.
53 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
55 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
56 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
58 #ifdef CONFIG_SPL_BUILD
59 #define CONFIG_SYS_MALLOC_SIMPLE
62 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
63 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
65 #endif /* _CONFIG_DB_88F6720_H */