include/configs/da850evm.h

   1 /*
   2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * Based on davinci_dvevm.h. Original Copyrights follow:
   5  *
   6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * Board
  16  */
  17 #define CONFIG_DRIVER_TI_EMAC
  18 /* check if direct NOR boot config is used */
  19 #ifndef CONFIG_DIRECT_NOR_BOOT
  20 #define CONFIG_USE_SPIFLASH
  21 #endif
  22
  23
  24 /*
  25  * SoC Configuration
  26  */
  27 #define CONFIG_MACH_DAVINCI_DA850_EVM
  28 #define CONFIG_ARM926EJS                /* arm926ejs CPU core */
  29 #define CONFIG_SOC_DA8XX                /* TI DA8xx SoC */
  30 #define CONFIG_SOC_DA850                /* TI DA850 SoC */
  31 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  32 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  33 #define CONFIG_SYS_OSCIN_FREQ           24000000
  34 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  35 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  36 #define CONFIG_SYS_DA850_PLL_INIT
  37 #define CONFIG_SYS_DA850_DDR_INIT
  38
  39 #ifdef CONFIG_DIRECT_NOR_BOOT
  40 #define CONFIG_ARCH_CPU_INIT
  41 #define CONFIG_DA8XX_GPIO
  42 #define CONFIG_SYS_TEXT_BASE            0x60000000
  43 #define CONFIG_SYS_DV_NOR_BOOT_CFG      (0x11)
  44 #define CONFIG_DA850_LOWLEVEL
  45 #else
  46 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  47 #endif
  48
  49 /*
  50  * Memory Info
  51  */
  52 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  53 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  54 #define PHYS_SDRAM_1_SIZE       (64 << 20) /* SDRAM size 64MB */
  55 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  56
  57 /* memtest start addr */
  58 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  59
  60 /* memtest will be run on 16MB */
  61 #define CONFIG_SYS_MEMTEST_END  (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
  62
  63 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  64
  65 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  66         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  67         DAVINCI_SYSCFG_SUSPSRC_SPI1 |           \
  68         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  69         DAVINCI_SYSCFG_SUSPSRC_EMAC |           \
  70         DAVINCI_SYSCFG_SUSPSRC_I2C)
  71
  72 /*
  73  * PLL configuration
  74  */
  75 #define CONFIG_SYS_DV_CLKMODE          0
  76 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
  77 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
  78 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
  79 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
  80 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
  81 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
  82 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
  83 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
  84
  85 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
  86 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
  87 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
  88 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
  89
  90 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  91 #define CONFIG_SYS_DA850_PLL1_PLLM     21
  92
  93 /*
  94  * DDR2 memory configuration
  95  */
  96 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  97                                         DV_DDR_PHY_EXT_STRBEN | \
  98                                         (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  99
 100 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
 101         (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) |     \
 102         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
 103         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
 104         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
 105         (0x3 << DV_DDR_SDCR_CL_SHIFT) |         \
 106         (0x2 << DV_DDR_SDCR_IBANK_SHIFT) |      \
 107         (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 108
 109 /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
 110 #define CONFIG_SYS_DA850_DDR2_SDBCR2 0
 111
 112 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
 113         (14 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
 114         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
 115         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
 116         (1 << DV_DDR_SDTMR1_WR_SHIFT) |         \
 117         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
 118         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
 119         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
 120         (0 << DV_DDR_SDTMR1_WTR_SHIFT))
 121
 122 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
 123         (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
 124         (0 << DV_DDR_SDTMR2_XP_SHIFT) |         \
 125         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
 126         (17 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
 127         (199 << DV_DDR_SDTMR2_XSRD_SHIFT) |     \
 128         (0 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
 129         (0 << DV_DDR_SDTMR2_CKE_SHIFT))
 130
 131 #define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000494
 132 #define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
 133
 134 /*
 135  * Serial Driver info
 136  */
 137 #define CONFIG_SYS_NS16550
 138 #define CONFIG_SYS_NS16550_SERIAL
 139 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 140 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
 141 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 142 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 143 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
 144
 145 #define CONFIG_SPI
 146 #define CONFIG_SPI_FLASH
 147 #define CONFIG_SPI_FLASH_STMICRO
 148 #define CONFIG_SPI_FLASH_WINBOND
 149 #define CONFIG_CMD_SF
 150 #define CONFIG_DAVINCI_SPI
 151 #define CONFIG_SYS_SPI_BASE             DAVINCI_SPI1_BASE
 152 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
 153 #define CONFIG_SF_DEFAULT_SPEED         30000000
 154 #define CONFIG_ENV_SPI_MAX_HZ   CONFIG_SF_DEFAULT_SPEED
 155
 156 #ifdef CONFIG_USE_SPIFLASH
 157 #define CONFIG_SPL_SPI_SUPPORT
 158 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 159 #define CONFIG_SPL_SPI_LOAD
 160 #define CONFIG_SPL_SPI_BUS 0
 161 #define CONFIG_SPL_SPI_CS 0
 162 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 163 #define CONFIG_SYS_SPI_U_BOOT_SIZE      0x30000
 164 #endif
 165
 166 /*
 167  * I2C Configuration
 168  */
 169 #define CONFIG_SYS_I2C
 170 #define CONFIG_SYS_I2C_DAVINCI
 171 #define CONFIG_SYS_DAVINCI_I2C_SPEED            25000
 172 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
 173 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
 174
 175 /*
 176  * Flash & Environment
 177  */
 178 #ifdef CONFIG_USE_NAND
 179 #undef CONFIG_ENV_IS_IN_FLASH
 180 #define CONFIG_NAND_DAVINCI
 181 #define CONFIG_SYS_NO_FLASH
 182 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
 183 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 184 #define CONFIG_ENV_SIZE                 (128 << 10)
 185 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 186 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 187 #define CONFIG_SYS_NAND_PAGE_2K
 188 #define CONFIG_SYS_NAND_CS              3
 189 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 190 #define CONFIG_SYS_NAND_MASK_CLE                0x10
 191 #define CONFIG_SYS_NAND_MASK_ALE                0x8
 192 #undef CONFIG_SYS_NAND_HW_ECC
 193 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 194 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 195 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 196 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)
 197 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)
 198 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x28000
 199 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x60000
 200 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 201 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 202 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 203                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 204                                         CONFIG_SYS_MALLOC_LEN -       \
 205                                         GENERATED_GBL_DATA_SIZE)
 206 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 207                                 24, 25, 26, 27, 28, \
 208                                 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
 209                                 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
 210                                 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
 211                                 59, 60, 61, 62, 63 }
 212 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 213 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 214 #define CONFIG_SYS_NAND_ECCSIZE         512
 215 #define CONFIG_SYS_NAND_ECCBYTES        10
 216 #define CONFIG_SYS_NAND_OOBSIZE         64
 217 #define CONFIG_SPL_NAND_SUPPORT
 218 #define CONFIG_SPL_NAND_BASE
 219 #define CONFIG_SPL_NAND_DRIVERS
 220 #define CONFIG_SPL_NAND_ECC
 221 #define CONFIG_SPL_NAND_SIMPLE
 222 #define CONFIG_SPL_NAND_LOAD
 223 #endif
 224
 225 /*
 226  * Network & Ethernet Configuration
 227  */
 228 #ifdef CONFIG_DRIVER_TI_EMAC
 229 #define CONFIG_MII
 230 #define CONFIG_BOOTP_DNS
 231 #define CONFIG_BOOTP_DNS2
 232 #define CONFIG_BOOTP_SEND_HOSTNAME
 233 #define CONFIG_NET_RETRY_COUNT  10
 234 #endif
 235
 236 #ifdef CONFIG_USE_NOR
 237 #define CONFIG_ENV_IS_IN_FLASH
 238 #define CONFIG_FLASH_CFI_DRIVER
 239 #define CONFIG_SYS_FLASH_CFI
 240 #define CONFIG_SYS_FLASH_PROTECTION
 241 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* max number of flash banks */
 242 #define CONFIG_SYS_FLASH_SECT_SZ        (128 << 10) /* 128KB */
 243 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_FLASH_SECT_SZ * 3)
 244 #define CONFIG_ENV_SIZE                 (10 << 10) /* 10KB */
 245 #define CONFIG_SYS_FLASH_BASE           DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 246 #define PHYS_FLASH_SIZE                 (8 << 20) /* Flash size 8MB */
 247 #define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
 248                + 3)
 249 #define CONFIG_ENV_SECT_SIZE            CONFIG_SYS_FLASH_SECT_SZ
 250 #endif
 251
 252 #ifdef CONFIG_USE_SPIFLASH
 253 #undef CONFIG_ENV_IS_IN_FLASH
 254 #undef CONFIG_ENV_IS_IN_NAND
 255 #define CONFIG_ENV_IS_IN_SPI_FLASH
 256 #define CONFIG_ENV_SIZE                 (64 << 10)
 257 #define CONFIG_ENV_OFFSET               (256 << 10)
 258 #define CONFIG_ENV_SECT_SIZE            (64 << 10)
 259 #define CONFIG_SYS_NO_FLASH
 260 #endif
 261
 262 /*
 263  * U-Boot general configuration
 264  */
 265 #define CONFIG_MISC_INIT_R
 266 #define CONFIG_BOARD_EARLY_INIT_F
 267 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 268 #define CONFIG_SYS_PROMPT       "U-Boot > " /* Command Prompt */
 269 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 270 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 271 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 272 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 273 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 274 #define CONFIG_VERSION_VARIABLE
 275 #define CONFIG_AUTO_COMPLETE
 276 #define CONFIG_SYS_HUSH_PARSER
 277 #define CONFIG_CMDLINE_EDITING
 278 #define CONFIG_SYS_LONGHELP
 279 #define CONFIG_CRC32_VERIFY
 280 #define CONFIG_MX_CYCLIC
 281
 282 /*
 283  * Linux Information
 284  */
 285 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 286 #define CONFIG_HWCONFIG         /* enable hwconfig */
 287 #define CONFIG_CMDLINE_TAG
 288 #define CONFIG_REVISION_TAG
 289 #define CONFIG_SETUP_MEMORY_TAGS
 290 #define CONFIG_BOOTARGS         \
 291         "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
 292 #define CONFIG_BOOTDELAY        3
 293 #define CONFIG_EXTRA_ENV_SETTINGS       "hwconfig=dsp:wake=yes"
 294
 295 /*
 296  * U-Boot commands
 297  */
 298 #include <config_cmd_default.h>
 299 #define CONFIG_CMD_ENV
 300 #define CONFIG_CMD_ASKENV
 301 #define CONFIG_CMD_DHCP
 302 #define CONFIG_CMD_DIAG
 303 #define CONFIG_CMD_MII
 304 #define CONFIG_CMD_PING
 305 #define CONFIG_CMD_SAVES
 306 #define CONFIG_CMD_MEMORY
 307
 308 #ifdef CONFIG_CMD_BDI
 309 #define CONFIG_CLOCKS
 310 #endif
 311
 312 #ifndef CONFIG_DRIVER_TI_EMAC
 313 #undef CONFIG_CMD_NET
 314 #undef CONFIG_CMD_DHCP
 315 #undef CONFIG_CMD_MII
 316 #undef CONFIG_CMD_PING
 317 #endif
 318
 319 #ifdef CONFIG_USE_NAND
 320 #undef CONFIG_CMD_FLASH
 321 #undef CONFIG_CMD_IMLS
 322 #define CONFIG_CMD_NAND
 323
 324 #define CONFIG_CMD_MTDPARTS
 325 #define CONFIG_MTD_DEVICE
 326 #define CONFIG_MTD_PARTITIONS
 327 #define CONFIG_LZO
 328 #define CONFIG_RBTREE
 329 #define CONFIG_CMD_UBI
 330 #define CONFIG_CMD_UBIFS
 331 #endif
 332
 333 #ifdef CONFIG_USE_SPIFLASH
 334 #undef CONFIG_CMD_IMLS
 335 #undef CONFIG_CMD_FLASH
 336 #define CONFIG_CMD_SPI
 337 #define CONFIG_CMD_SAVEENV
 338 #endif
 339
 340 #if !defined(CONFIG_USE_NAND) && \
 341         !defined(CONFIG_USE_NOR) && \
 342         !defined(CONFIG_USE_SPIFLASH)
 343 #define CONFIG_ENV_IS_NOWHERE
 344 #define CONFIG_SYS_NO_FLASH
 345 #define CONFIG_ENV_SIZE         (16 << 10)
 346 #undef CONFIG_CMD_IMLS
 347 #undef CONFIG_CMD_ENV
 348 #endif
 349
 350 /* SD/MMC configuration */
 351 #ifndef CONFIG_USE_NOR
 352 #define CONFIG_MMC
 353 #define CONFIG_DAVINCI_MMC_SD1
 354 #define CONFIG_GENERIC_MMC
 355 #define CONFIG_DAVINCI_MMC
 356 #endif
 357
 358 /*
 359  * Enable MMC commands only when
 360  * MMC support is present
 361  */
 362 #ifdef CONFIG_MMC
 363 #define CONFIG_DOS_PARTITION
 364 #define CONFIG_CMD_EXT2
 365 #define CONFIG_CMD_FAT
 366 #define CONFIG_CMD_MMC
 367 #endif
 368
 369 #ifndef CONFIG_DIRECT_NOR_BOOT
 370 /* defines for SPL */
 371 #define CONFIG_SPL
 372 #define CONFIG_SPL_FRAMEWORK
 373 #define CONFIG_SPL_BOARD_INIT
 374 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 375                                                 CONFIG_SYS_MALLOC_LEN)
 376 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 377 #define CONFIG_SPL_SPI_SUPPORT
 378 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 379 #define CONFIG_SPL_SPI_LOAD
 380 #define CONFIG_SPL_SPI_BUS 0
 381 #define CONFIG_SPL_SPI_CS 0
 382 #define CONFIG_SPL_SERIAL_SUPPORT
 383 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 384 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 385 #define CONFIG_SPL_LDSCRIPT     "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 386 #define CONFIG_SPL_STACK        0x8001ff00
 387 #define CONFIG_SPL_TEXT_BASE    0x80000000
 388 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 389 #define CONFIG_SPL_PAD_TO       32768
 390 #endif
 391
 392 /* Load U-Boot Image From MMC */
 393 #ifdef CONFIG_SPL_MMC_LOAD
 394 #define CONFIG_SPL_MMC_SUPPORT
 395 #define CONFIG_SPL_LIBDISK_SUPPORT
 396 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x75
 397 #undef CONFIG_SPL_SPI_SUPPORT
 398 #undef CONFIG_SPL_SPI_LOAD
 399 #endif
 400
 401 /* additions for new relocation code, must added to all boards */
 402 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 403
 404 #ifdef CONFIG_DIRECT_NOR_BOOT
 405 #define CONFIG_SYS_INIT_SP_ADDR         0x8001ff00
 406 #else
 407 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 408                                         GENERATED_GBL_DATA_SIZE)
 409 #endif /* CONFIG_DIRECT_NOR_BOOT */
 410 #endif /* __CONFIG_H */