include/configs/cyrus.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Based on corenet_ds.h
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
  10 #error Must call Cyrus CONFIG with a specific CPU enabled.
  11 #endif
  12
  13 #define CONFIG_SDCARD
  14 #define CONFIG_FSL_SATA_V2
  15 #define CONFIG_PCIE3
  16 #define CONFIG_PCIE4
  17 #ifdef CONFIG_ARCH_P5020
  18 #define CONFIG_SYS_FSL_RAID_ENGINE
  19 #define CONFIG_SYS_DPAA_RMAN
  20 #endif
  21 #define CONFIG_SYS_DPAA_PME
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
  29 #if defined(CONFIG_ARCH_P5020)
  30 #define CONFIG_SYS_CLK_FREQ 133000000
  31 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
  32 #elif defined(CONFIG_ARCH_P5040)
  33 #define CONFIG_SYS_CLK_FREQ 100000000
  34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  39
  40 #define CONFIG_SYS_MMC_MAX_DEVICE     1
  41
  42 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  43 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  44 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  45 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  46 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  47 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  48
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 #if defined(CONFIG_SDCARD)
  52 #define CONFIG_FSL_FIXED_MMC_LOCATION
  53 #define CONFIG_SYS_MMC_ENV_DEV          0
  54 #define CONFIG_ENV_SIZE                 0x2000
  55 #define CONFIG_ENV_OFFSET               (512 * 1658)
  56 #endif
  57
  58 /*
  59  * These can be toggled for performance analysis, otherwise use default.
  60  */
  61 #define CONFIG_SYS_CACHE_STASHING
  62 #define CONFIG_BACKSIDE_L2_CACHE
  63 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  64 #define CONFIG_BTB                      /* toggle branch predition */
  65 #define CONFIG_DDR_ECC
  66 #ifdef CONFIG_DDR_ECC
  67 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  68 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  69 #endif
  70
  71 #define CONFIG_ENABLE_36BIT_PHYS
  72
  73 #ifdef CONFIG_PHYS_64BIT
  74 #define CONFIG_ADDR_MAP
  75 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  76 #endif
  77
  78 /* test POST memory test */
  79 #undef CONFIG_POST
  80 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  81 #define CONFIG_SYS_MEMTEST_END          0x00400000
  82
  83 /*
  84  *  Config the L3 Cache as L3 SRAM
  85  */
  86 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  87 #ifdef CONFIG_PHYS_64BIT
  88 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  89 #else
  90 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  91 #endif
  92 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  93 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  94
  95 #ifdef CONFIG_PHYS_64BIT
  96 #define CONFIG_SYS_DCSRBAR              0xf0000000
  97 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  98 #endif
  99
 100 /*
 101  * DDR Setup
 102  */
 103 #define CONFIG_VERY_BIG_RAM
 104 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 105 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 106
 107 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 108 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 109
 110 #define CONFIG_DDR_SPD
 111
 112 #define CONFIG_SYS_SPD_BUS_NUM  1
 113 #define SPD_EEPROM_ADDRESS1     0x51
 114 #define SPD_EEPROM_ADDRESS2     0x52
 115 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 116
 117 /*
 118  * Local Bus Definitions
 119  */
 120
 121 #define CONFIG_SYS_LBC0_BASE            0xe0000000 /* Start of LBC Registers */
 122 #ifdef CONFIG_PHYS_64BIT
 123 #define CONFIG_SYS_LBC0_BASE_PHYS       0xfe0000000ull
 124 #else
 125 #define CONFIG_SYS_LBC0_BASE_PHYS       CONFIG_SYS_LBC0_BASE
 126 #endif
 127
 128 #define CONFIG_SYS_LBC1_BASE            0xe1000000 /* Start of LBC Registers */
 129 #ifdef CONFIG_PHYS_64BIT
 130 #define CONFIG_SYS_LBC1_BASE_PHYS       0xfe1000000ull
 131 #else
 132 #define CONFIG_SYS_LBC1_BASE_PHYS       CONFIG_SYS_LBC1_BASE
 133 #endif
 134
 135 /* Set the local bus clock 1/16 of platform clock */
 136 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_16 | LCRR_EADC_1)
 137
 138 #define CONFIG_SYS_BR0_PRELIM \
 139 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
 140 #define CONFIG_SYS_BR1_PRELIM \
 141 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
 142
 143 #define CONFIG_SYS_OR0_PRELIM   0xfff00010
 144 #define CONFIG_SYS_OR1_PRELIM   0xfff00010
 145
 146 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 147
 148 #if defined(CONFIG_RAMBOOT_PBL)
 149 #define CONFIG_SYS_RAMBOOT
 150 #endif
 151
 152 #define CONFIG_HWCONFIG
 153
 154 /* define to use L1 as initial stack */
 155 #define CONFIG_L1_INIT_RAM
 156 #define CONFIG_SYS_INIT_RAM_LOCK
 157 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 158 #ifdef CONFIG_PHYS_64BIT
 159 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 160 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 161 /* The assembler doesn't like typecast */
 162 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 163         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 164           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 165 #else
 166 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 167 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 168 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 169 #endif
 170 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 171
 172 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 173 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 174
 175 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 176 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 177
 178 /* Serial Port - controlled on board with jumper J8
 179  * open - index 2
 180  * shorted - index 1
 181  */
 182 #define CONFIG_SYS_NS16550_SERIAL
 183 #define CONFIG_SYS_NS16550_REG_SIZE     1
 184 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 185
 186 #define CONFIG_SYS_BAUDRATE_TABLE       \
 187 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 188
 189 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 190 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 191 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 192 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 193
 194 /* I2C */
 195 #define CONFIG_SYS_I2C
 196 #define CONFIG_SYS_I2C_FSL
 197 #define CONFIG_I2C_MULTI_BUS
 198 #define CONFIG_I2C_CMD_TREE
 199 #define CONFIG_SYS_FSL_I2C_SPEED                400000  /* I2C speed and slave address */
 200 #define CONFIG_SYS_FSL_I2C_SLAVE                0x7F
 201 #define CONFIG_SYS_FSL_I2C_OFFSET               0x118000
 202 #define CONFIG_SYS_FSL_I2C2_SPEED               400000  /* I2C speed and slave address */
 203 #define CONFIG_SYS_FSL_I2C2_SLAVE               0x7F
 204 #define CONFIG_SYS_FSL_I2C2_OFFSET              0x118100
 205 #define CONFIG_SYS_FSL_I2C3_SPEED               400000  /* I2C speed and slave address */
 206 #define CONFIG_SYS_FSL_I2C3_SLAVE               0x7F
 207 #define CONFIG_SYS_FSL_I2C3_OFFSET              0x119000
 208 #define CONFIG_SYS_FSL_I2C4_SPEED               400000  /* I2C speed and slave address */
 209 #define CONFIG_SYS_FSL_I2C4_SLAVE               0x7F
 210 #define CONFIG_SYS_FSL_I2C4_OFFSET              0x119100
 211
 212 #define CONFIG_ID_EEPROM
 213 #define CONFIG_SYS_I2C_EEPROM_NXID
 214 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 215 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 217
 218 #define CONFIG_SYS_I2C_GENERIC_MAC
 219 #define CONFIG_SYS_I2C_MAC1_BUS 3
 220 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
 221 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
 222 #define CONFIG_SYS_I2C_MAC2_BUS 0
 223 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 224 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 225
 226 #define CONFIG_RTC_MCP79411             1
 227 #define CONFIG_SYS_RTC_BUS_NUM          3
 228 #define CONFIG_SYS_I2C_RTC_ADDR         0x6f
 229
 230 /*
 231  * eSPI - Enhanced SPI
 232  */
 233
 234 /*
 235  * General PCI
 236  * Memory space is mapped 1-1, but I/O space must start from 0.
 237  */
 238
 239 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 240 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 241 #ifdef CONFIG_PHYS_64BIT
 242 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 243 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 244 #else
 245 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 246 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 247 #endif
 248 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 249 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 250 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 251 #ifdef CONFIG_PHYS_64BIT
 252 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 253 #else
 254 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 255 #endif
 256 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 257
 258 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 259 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 260 #ifdef CONFIG_PHYS_64BIT
 261 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 262 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 263 #else
 264 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 265 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 266 #endif
 267 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 268 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 269 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 270 #ifdef CONFIG_PHYS_64BIT
 271 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 272 #else
 273 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 274 #endif
 275 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 276
 277 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 278 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 279 #ifdef CONFIG_PHYS_64BIT
 280 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 281 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 282 #else
 283 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 284 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 285 #endif
 286 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 287 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 288 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 289 #ifdef CONFIG_PHYS_64BIT
 290 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 291 #else
 292 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 293 #endif
 294 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 295
 296 /* controller 4, Base address 203000 */
 297 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 298 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 299 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 300 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 301 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 302 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 303
 304 /* Qman/Bman */
 305 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 306 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 307 #ifdef CONFIG_PHYS_64BIT
 308 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 309 #else
 310 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 311 #endif
 312 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 313 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 314 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 315 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 316 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 317 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 318                                          CONFIG_SYS_BMAN_CENA_SIZE)
 319 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 320 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 321 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 322 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 323 #ifdef CONFIG_PHYS_64BIT
 324 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 325 #else
 326 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 327 #endif
 328 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 329 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 330 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 331 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 332 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 333 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 334                                           CONFIG_SYS_QMAN_CENA_SIZE)
 335 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 336 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 337
 338 #define CONFIG_SYS_DPAA_FMAN
 339 /* Default address of microcode for the Linux Fman driver */
 340 /*
 341  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 342  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 343  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 344  */
 345 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 346 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 347
 348 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 349 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 350
 351 #ifdef CONFIG_SYS_DPAA_FMAN
 352 #define CONFIG_FMAN_ENET
 353 #endif
 354
 355 #ifdef CONFIG_PCI
 356 #define CONFIG_PCI_INDIRECT_BRIDGE
 357
 358 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 359 #endif  /* CONFIG_PCI */
 360
 361 /* SATA */
 362 #ifdef CONFIG_FSL_SATA_V2
 363 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 364 #define CONFIG_SATA1
 365 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 366 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 367 #define CONFIG_SATA2
 368 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 369 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 370
 371 #define CONFIG_LBA48
 372 #endif
 373
 374 #ifdef CONFIG_FMAN_ENET
 375 #define CONFIG_SYS_TBIPA_VALUE  8
 376 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 377 #endif
 378
 379 /*
 380  * Environment
 381  */
 382 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 383 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 384
 385 /*
 386  * USB
 387  */
 388 #define CONFIG_HAS_FSL_DR_USB
 389 #define CONFIG_HAS_FSL_MPH_USB
 390
 391 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 392 #define CONFIG_USB_EHCI_FSL
 393 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 394 #define CONFIG_EHCI_IS_TDI
 395  /* _VIA_CONTROL_EP  */
 396 #endif
 397
 398 #ifdef CONFIG_MMC
 399 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 400 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 401 #endif
 402
 403 /*
 404  * Miscellaneous configurable options
 405  */
 406 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 407
 408 /*
 409  * For booting Linux, the board info and command line data
 410  * have to be in the first 64 MB of memory, since this is
 411  * the maximum mapped by the Linux kernel during initialization.
 412  */
 413 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 414 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 415
 416 #ifdef CONFIG_CMD_KGDB
 417 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 418 #endif
 419
 420 /*
 421  * Environment Configuration
 422  */
 423 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 424 #define CONFIG_BOOTFILE         "uImage"
 425 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 426
 427 /* default location for tftp and bootm */
 428 #define CONFIG_LOADADDR         1000000
 429
 430 #define __USB_PHY_TYPE  utmi
 431
 432 #define CONFIG_EXTRA_ENV_SETTINGS \
 433 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 434 "bank_intlv=cs0_cs1;"                                   \
 435 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 436 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 437 "netdev=eth0\0"                                         \
 438 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 439 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 440 "consoledev=ttyS0\0"                                    \
 441 "ramdiskaddr=2000000\0"                                 \
 442 "fdtaddr=1e00000\0"                                     \
 443 "bdev=sda3\0"
 444
 445 #define CONFIG_HDBOOT                                   \
 446 "setenv bootargs root=/dev/$bdev rw "           \
 447 "console=$consoledev,$baudrate $othbootargs;"   \
 448 "tftp $loadaddr $bootfile;"                     \
 449 "tftp $fdtaddr $fdtfile;"                       \
 450 "bootm $loadaddr - $fdtaddr"
 451
 452 #define CONFIG_NFSBOOTCOMMAND                   \
 453 "setenv bootargs root=/dev/nfs rw "     \
 454 "nfsroot=$serverip:$rootpath "          \
 455 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 456 "console=$consoledev,$baudrate $othbootargs;"   \
 457 "tftp $loadaddr $bootfile;"             \
 458 "tftp $fdtaddr $fdtfile;"               \
 459 "bootm $loadaddr - $fdtaddr"
 460
 461 #define CONFIG_RAMBOOTCOMMAND                           \
 462 "setenv bootargs root=/dev/ram rw "             \
 463 "console=$consoledev,$baudrate $othbootargs;"   \
 464 "tftp $ramdiskaddr $ramdiskfile;"               \
 465 "tftp $loadaddr $bootfile;"                     \
 466 "tftp $fdtaddr $fdtfile;"                       \
 467 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 468
 469 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 470
 471 #include <asm/fsl_secure_boot.h>
 472
 473 #endif  /* __CONFIG_H */