include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #ifdef CONFIG_NXP_ESBC
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #define CONFIG_RAMBOOT_NAND
  23 #endif
  24 #define CONFIG_BOOTSCRIPT_COPY_RAM
  25 #else
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #endif
  29 #endif
  30
  31 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  32 /* Set 1M boot space */
  33 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  34 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  35                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  36 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  41
  42 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  43 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  44 #endif
  45
  46 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  47 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  48 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  49 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  50 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  51
  52 #if defined(CONFIG_SPIFLASH)
  53 #elif defined(CONFIG_SDCARD)
  54 #define CONFIG_FSL_FIXED_MMC_LOCATION
  55 #endif
  56
  57 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  58
  59 /*
  60  * These can be toggled for performance analysis, otherwise use default.
  61  */
  62 #define CONFIG_SYS_CACHE_STASHING
  63 #define CONFIG_BACKSIDE_L2_CACHE
  64 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  65 #define CONFIG_BTB                      /* toggle branch predition */
  66 #ifdef CONFIG_DDR_ECC
  67 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  68 #endif
  69
  70 #define CONFIG_ENABLE_36BIT_PHYS
  71
  72 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  73
  74 /*
  75  *  Config the L3 Cache as L3 SRAM
  76  */
  77 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  78 #ifdef CONFIG_PHYS_64BIT
  79 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  80 #else
  81 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  82 #endif
  83 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  84 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  85
  86 #ifdef CONFIG_PHYS_64BIT
  87 #define CONFIG_SYS_DCSRBAR              0xf0000000
  88 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  89 #endif
  90
  91 /* EEPROM */
  92 #define CONFIG_SYS_I2C_EEPROM_NXID
  93 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  94
  95 /*
  96  * DDR Setup
  97  */
  98 #define CONFIG_VERY_BIG_RAM
  99 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 100 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 101
 102 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 103 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 104
 105 #define CONFIG_SYS_SPD_BUS_NUM  1
 106 #define SPD_EEPROM_ADDRESS1     0x51
 107 #define SPD_EEPROM_ADDRESS2     0x52
 108 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 109 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 110
 111 /*
 112  * Local Bus Definitions
 113  */
 114
 115 /* Set the local bus clock 1/8 of platform clock */
 116 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 117
 118 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 119 #ifdef CONFIG_PHYS_64BIT
 120 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 121 #else
 122 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 123 #endif
 124
 125 #define CONFIG_SYS_FLASH_BR_PRELIM \
 126                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 127                  | BR_PS_16 | BR_V)
 128 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 129                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 130
 131 #define CONFIG_SYS_BR1_PRELIM \
 132         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 133 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 134
 135 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 136 #ifdef CONFIG_PHYS_64BIT
 137 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 138 #else
 139 #define PIXIS_BASE_PHYS         PIXIS_BASE
 140 #endif
 141
 142 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 143 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 144
 145 #define PIXIS_LBMAP_SWITCH      7
 146 #define PIXIS_LBMAP_MASK        0xf0
 147 #define PIXIS_LBMAP_SHIFT       4
 148 #define PIXIS_LBMAP_ALTBANK     0x40
 149
 150 #define CONFIG_SYS_FLASH_QUIET_TEST
 151 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 152
 153 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 154 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 155 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 156 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 157
 158 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 159
 160 #if defined(CONFIG_RAMBOOT_PBL)
 161 #define CONFIG_SYS_RAMBOOT
 162 #endif
 163
 164 /* Nand Flash */
 165 #ifdef CONFIG_NAND_FSL_ELBC
 166 #define CONFIG_SYS_NAND_BASE            0xffa00000
 167 #ifdef CONFIG_PHYS_64BIT
 168 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 169 #else
 170 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 171 #endif
 172
 173 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 174 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 175 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 176
 177 /* NAND flash config */
 178 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 179                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 180                                | BR_PS_8               /* Port Size = 8 bit */ \
 181                                | BR_MS_FCM             /* MSEL = FCM */ \
 182                                | BR_V)                 /* valid */
 183 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 184                                | OR_FCM_PGS            /* Large Page*/ \
 185                                | OR_FCM_CSCT \
 186                                | OR_FCM_CST \
 187                                | OR_FCM_CHT \
 188                                | OR_FCM_SCY_1 \
 189                                | OR_FCM_TRLX \
 190                                | OR_FCM_EHTR)
 191
 192 #ifdef CONFIG_MTD_RAW_NAND
 193 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 194 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 195 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 196 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 197 #else
 198 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 199 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 200 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 201 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 202 #endif
 203 #else
 204 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 205 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 206 #endif /* CONFIG_NAND_FSL_ELBC */
 207
 208 #define CONFIG_SYS_FLASH_EMPTY_INFO
 209 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 210 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 211
 212 #define CONFIG_HWCONFIG
 213
 214 /* define to use L1 as initial stack */
 215 #define CONFIG_L1_INIT_RAM
 216 #define CONFIG_SYS_INIT_RAM_LOCK
 217 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 218 #ifdef CONFIG_PHYS_64BIT
 219 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 220 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 221 /* The assembler doesn't like typecast */
 222 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 223         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 224           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 225 #else
 226 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 227 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 228 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 229 #endif
 230 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 231
 232 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 233 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 234
 235 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 236 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 237
 238 /* Serial Port - controlled on board with jumper J8
 239  * open - index 2
 240  * shorted - index 1
 241  */
 242 #define CONFIG_SYS_NS16550_SERIAL
 243 #define CONFIG_SYS_NS16550_REG_SIZE     1
 244 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 245
 246 #define CONFIG_SYS_BAUDRATE_TABLE       \
 247         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 248
 249 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 250 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 251 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 252 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 253
 254 /* I2C */
 255
 256 /*
 257  * RapidIO
 258  */
 259 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 260 #ifdef CONFIG_PHYS_64BIT
 261 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 262 #else
 263 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 264 #endif
 265 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 266
 267 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 268 #ifdef CONFIG_PHYS_64BIT
 269 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 270 #else
 271 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 272 #endif
 273 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 274
 275 /*
 276  * for slave u-boot IMAGE instored in master memory space,
 277  * PHYS must be aligned based on the SIZE
 278  */
 279 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 280 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 281 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 282 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 283 /*
 284  * for slave UCODE and ENV instored in master memory space,
 285  * PHYS must be aligned based on the SIZE
 286  */
 287 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 288 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 289 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 290
 291 /* slave core release by master*/
 292 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 293 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 294
 295 /*
 296  * SRIO_PCIE_BOOT - SLAVE
 297  */
 298 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 299 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 300 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 301                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 302 #endif
 303
 304 /*
 305  * eSPI - Enhanced SPI
 306  */
 307
 308 /*
 309  * General PCI
 310  * Memory space is mapped 1-1, but I/O space must start from 0.
 311  */
 312
 313 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 314 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 315 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 316 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 317 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 318
 319 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 320 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 321 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 322 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 323 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 324
 325 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 326 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 327 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 328 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 329 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 330
 331 /* controller 4, Base address 203000 */
 332 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 333 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 334
 335 /* Qman/Bman */
 336 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 337 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 338 #ifdef CONFIG_PHYS_64BIT
 339 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 340 #else
 341 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 342 #endif
 343 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 344 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 345 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 346 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 347 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 348 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 349                                         CONFIG_SYS_BMAN_CENA_SIZE)
 350 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 351 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 352 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 353 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 354 #ifdef CONFIG_PHYS_64BIT
 355 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 356 #else
 357 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 358 #endif
 359 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 360 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 361 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 362 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 363 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 364 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 365                                         CONFIG_SYS_QMAN_CENA_SIZE)
 366 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 367 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 368
 369 #define CONFIG_SYS_DPAA_FMAN
 370 #define CONFIG_SYS_DPAA_PME
 371 /* Default address of microcode for the Linux Fman driver */
 372 #if defined(CONFIG_SPIFLASH)
 373 /*
 374  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 375  * env, so we got 0x110000.
 376  */
 377 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 378 #elif defined(CONFIG_SDCARD)
 379 /*
 380  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 381  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 382  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 383  */
 384 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 385 #elif defined(CONFIG_MTD_RAW_NAND)
 386 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 387 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 388 /*
 389  * Slave has no ucode locally, it can fetch this from remote. When implementing
 390  * in two corenet boards, slave's ucode could be stored in master's memory
 391  * space, the address can be mapped from slave TLB->slave LAW->
 392  * slave SRIO or PCIE outbound window->master inbound window->
 393  * master LAW->the ucode address in master's memory space.
 394  */
 395 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 396 #else
 397 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 398 #endif
 399 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 400 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 401
 402 #ifdef CONFIG_PCI
 403 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 404 #endif  /* CONFIG_PCI */
 405
 406 /* SATA */
 407 #ifdef CONFIG_FSL_SATA_V2
 408 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 409 #define CONFIG_SATA1
 410 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 411 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 412 #define CONFIG_SATA2
 413 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 414 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 415
 416 #define CONFIG_LBA48
 417 #endif
 418
 419 #ifdef CONFIG_FMAN_ENET
 420 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 421 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 422 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 423 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 424 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 425
 426 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 427 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 428 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 429 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 430 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 431
 432 #define CONFIG_SYS_TBIPA_VALUE  8
 433 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 434 #endif
 435
 436 /*
 437  * Environment
 438  */
 439 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 440 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 441
 442 /*
 443 * USB
 444 */
 445 #define CONFIG_HAS_FSL_DR_USB
 446 #define CONFIG_HAS_FSL_MPH_USB
 447
 448 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 449 #define CONFIG_USB_EHCI_FSL
 450 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 451 #endif
 452
 453 #ifdef CONFIG_MMC
 454 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 455 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 456 #endif
 457
 458 /*
 459  * Miscellaneous configurable options
 460  */
 461
 462 /*
 463  * For booting Linux, the board info and command line data
 464  * have to be in the first 64 MB of memory, since this is
 465  * the maximum mapped by the Linux kernel during initialization.
 466  */
 467 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 468 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 469
 470 #ifdef CONFIG_CMD_KGDB
 471 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 472 #endif
 473
 474 /*
 475  * Environment Configuration
 476  */
 477 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 478 #define CONFIG_BOOTFILE         "uImage"
 479 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 480
 481 #ifdef CONFIG_TARGET_P4080DS
 482 #define __USB_PHY_TYPE  ulpi
 483 #else
 484 #define __USB_PHY_TYPE  utmi
 485 #endif
 486
 487 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 488         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 489         "bank_intlv=cs0_cs1;"                                   \
 490         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 491         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 492         "netdev=eth0\0"                                         \
 493         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 494         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 495         "tftpflash=tftpboot $loadaddr $uboot && "               \
 496         "protect off $ubootaddr +$filesize && "                 \
 497         "erase $ubootaddr +$filesize && "                       \
 498         "cp.b $loadaddr $ubootaddr $filesize && "               \
 499         "protect on $ubootaddr +$filesize && "                  \
 500         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 501         "consoledev=ttyS0\0"                                    \
 502         "ramdiskaddr=2000000\0"                                 \
 503         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 504         "fdtaddr=1e00000\0"                                     \
 505         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 506         "bdev=sda3\0"
 507
 508 #define HDBOOT                                  \
 509         "setenv bootargs root=/dev/$bdev rw "           \
 510         "console=$consoledev,$baudrate $othbootargs;"   \
 511         "tftp $loadaddr $bootfile;"                     \
 512         "tftp $fdtaddr $fdtfile;"                       \
 513         "bootm $loadaddr - $fdtaddr"
 514
 515 #define NFSBOOTCOMMAND                  \
 516         "setenv bootargs root=/dev/nfs rw "     \
 517         "nfsroot=$serverip:$rootpath "          \
 518         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 519         "console=$consoledev,$baudrate $othbootargs;"   \
 520         "tftp $loadaddr $bootfile;"             \
 521         "tftp $fdtaddr $fdtfile;"               \
 522         "bootm $loadaddr - $fdtaddr"
 523
 524 #define RAMBOOTCOMMAND                          \
 525         "setenv bootargs root=/dev/ram rw "             \
 526         "console=$consoledev,$baudrate $othbootargs;"   \
 527         "tftp $ramdiskaddr $ramdiskfile;"               \
 528         "tftp $loadaddr $bootfile;"                     \
 529         "tftp $fdtaddr $fdtfile;"                       \
 530         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 531
 532 #define CONFIG_BOOTCOMMAND              HDBOOT
 533
 534 #include <asm/fsl_secure_boot.h>
 535
 536 #endif  /* __CONFIG_H */