include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #ifdef CONFIG_NXP_ESBC
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #define CONFIG_RAMBOOT_NAND
  23 #endif
  24 #define CONFIG_BOOTSCRIPT_COPY_RAM
  25 #else
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  29 #if defined(CONFIG_TARGET_P3041DS)
  30 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  31 #elif defined(CONFIG_TARGET_P4080DS)
  32 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  33 #elif defined(CONFIG_TARGET_P5020DS)
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  35 #elif defined(CONFIG_TARGET_P5040DS)
  36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  37 #endif
  38 #endif
  39 #endif
  40
  41 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  42 /* Set 1M boot space */
  43 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  44 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  45                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  46 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  47 #endif
  48
  49 /* High Level Configuration Options */
  50 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  51
  52 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  53 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  54 #endif
  55
  56 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  57 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  58 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  60 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  61
  62 #define CONFIG_ENV_OVERWRITE
  63
  64 #if defined(CONFIG_SPIFLASH)
  65 #elif defined(CONFIG_SDCARD)
  66 #define CONFIG_FSL_FIXED_MMC_LOCATION
  67 #define CONFIG_SYS_MMC_ENV_DEV          0
  68 #endif
  69
  70 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  71
  72 /*
  73  * These can be toggled for performance analysis, otherwise use default.
  74  */
  75 #define CONFIG_SYS_CACHE_STASHING
  76 #define CONFIG_BACKSIDE_L2_CACHE
  77 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  78 #define CONFIG_BTB                      /* toggle branch predition */
  79 #define CONFIG_DDR_ECC
  80 #ifdef CONFIG_DDR_ECC
  81 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  82 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  83 #endif
  84
  85 #define CONFIG_ENABLE_36BIT_PHYS
  86
  87 #ifdef CONFIG_PHYS_64BIT
  88 #define CONFIG_ADDR_MAP
  89 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  90 #endif
  91
  92 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  93
  94 /*
  95  *  Config the L3 Cache as L3 SRAM
  96  */
  97 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  98 #ifdef CONFIG_PHYS_64BIT
  99 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 100 #else
 101 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 102 #endif
 103 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 104 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 105
 106 #ifdef CONFIG_PHYS_64BIT
 107 #define CONFIG_SYS_DCSRBAR              0xf0000000
 108 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 109 #endif
 110
 111 /* EEPROM */
 112 #define CONFIG_ID_EEPROM
 113 #define CONFIG_SYS_I2C_EEPROM_NXID
 114 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 115 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 116 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 117
 118 /*
 119  * DDR Setup
 120  */
 121 #define CONFIG_VERY_BIG_RAM
 122 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 123 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 124
 125 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 126 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 127
 128 #define CONFIG_DDR_SPD
 129
 130 #define CONFIG_SYS_SPD_BUS_NUM  1
 131 #define SPD_EEPROM_ADDRESS1     0x51
 132 #define SPD_EEPROM_ADDRESS2     0x52
 133 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 134 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 135
 136 /*
 137  * Local Bus Definitions
 138  */
 139
 140 /* Set the local bus clock 1/8 of platform clock */
 141 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 142
 143 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 144 #ifdef CONFIG_PHYS_64BIT
 145 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 146 #else
 147 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 148 #endif
 149
 150 #define CONFIG_SYS_FLASH_BR_PRELIM \
 151                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 152                  | BR_PS_16 | BR_V)
 153 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 154                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 155
 156 #define CONFIG_SYS_BR1_PRELIM \
 157         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 158 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 159
 160 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 161 #ifdef CONFIG_PHYS_64BIT
 162 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 163 #else
 164 #define PIXIS_BASE_PHYS         PIXIS_BASE
 165 #endif
 166
 167 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 168 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 169
 170 #define PIXIS_LBMAP_SWITCH      7
 171 #define PIXIS_LBMAP_MASK        0xf0
 172 #define PIXIS_LBMAP_SHIFT       4
 173 #define PIXIS_LBMAP_ALTBANK     0x40
 174
 175 #define CONFIG_SYS_FLASH_QUIET_TEST
 176 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 177
 178 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 179 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 180 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 181 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 182
 183 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 184
 185 #if defined(CONFIG_RAMBOOT_PBL)
 186 #define CONFIG_SYS_RAMBOOT
 187 #endif
 188
 189 /* Nand Flash */
 190 #ifdef CONFIG_NAND_FSL_ELBC
 191 #define CONFIG_SYS_NAND_BASE            0xffa00000
 192 #ifdef CONFIG_PHYS_64BIT
 193 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 194 #else
 195 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 196 #endif
 197
 198 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 199 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 200 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 201
 202 /* NAND flash config */
 203 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 204                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 205                                | BR_PS_8               /* Port Size = 8 bit */ \
 206                                | BR_MS_FCM             /* MSEL = FCM */ \
 207                                | BR_V)                 /* valid */
 208 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 209                                | OR_FCM_PGS            /* Large Page*/ \
 210                                | OR_FCM_CSCT \
 211                                | OR_FCM_CST \
 212                                | OR_FCM_CHT \
 213                                | OR_FCM_SCY_1 \
 214                                | OR_FCM_TRLX \
 215                                | OR_FCM_EHTR)
 216
 217 #ifdef CONFIG_MTD_RAW_NAND
 218 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 219 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 220 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 221 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 222 #else
 223 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 224 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 225 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 226 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 227 #endif
 228 #else
 229 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 230 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 231 #endif /* CONFIG_NAND_FSL_ELBC */
 232
 233 #define CONFIG_SYS_FLASH_EMPTY_INFO
 234 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 235 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 236
 237 #define CONFIG_HWCONFIG
 238
 239 /* define to use L1 as initial stack */
 240 #define CONFIG_L1_INIT_RAM
 241 #define CONFIG_SYS_INIT_RAM_LOCK
 242 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 243 #ifdef CONFIG_PHYS_64BIT
 244 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 245 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 246 /* The assembler doesn't like typecast */
 247 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 248         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 249           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 250 #else
 251 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 252 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 253 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 254 #endif
 255 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 256
 257 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 258 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 259
 260 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 261 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 262
 263 /* Serial Port - controlled on board with jumper J8
 264  * open - index 2
 265  * shorted - index 1
 266  */
 267 #define CONFIG_SYS_NS16550_SERIAL
 268 #define CONFIG_SYS_NS16550_REG_SIZE     1
 269 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 270
 271 #define CONFIG_SYS_BAUDRATE_TABLE       \
 272         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 273
 274 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 275 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 276 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 277 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 278
 279 /* I2C */
 280 #ifndef CONFIG_DM_I2C
 281 #define CONFIG_SYS_I2C
 282 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 283 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 284 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 285 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 286 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 287 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 288 #else
 289 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 290 #define CONFIG_I2C_DEFAULT_BUS_NUMBER   0
 291 #endif
 292 #define CONFIG_SYS_I2C_FSL
 293
 294 /*
 295  * RapidIO
 296  */
 297 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 298 #ifdef CONFIG_PHYS_64BIT
 299 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 300 #else
 301 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 302 #endif
 303 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 304
 305 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 306 #ifdef CONFIG_PHYS_64BIT
 307 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 308 #else
 309 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 310 #endif
 311 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 312
 313 /*
 314  * for slave u-boot IMAGE instored in master memory space,
 315  * PHYS must be aligned based on the SIZE
 316  */
 317 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 318 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 319 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 320 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 321 /*
 322  * for slave UCODE and ENV instored in master memory space,
 323  * PHYS must be aligned based on the SIZE
 324  */
 325 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 326 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 327 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 328
 329 /* slave core release by master*/
 330 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 331 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 332
 333 /*
 334  * SRIO_PCIE_BOOT - SLAVE
 335  */
 336 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 337 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 338 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 339                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 340 #endif
 341
 342 /*
 343  * eSPI - Enhanced SPI
 344  */
 345
 346 /*
 347  * General PCI
 348  * Memory space is mapped 1-1, but I/O space must start from 0.
 349  */
 350
 351 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 352 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 353 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 354 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 355 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 356
 357 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 358 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 359 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 360 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 361 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 362
 363 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 364 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 365 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 366 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 367 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 368
 369 /* controller 4, Base address 203000 */
 370 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 371 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 372
 373 /* Qman/Bman */
 374 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 375 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 376 #ifdef CONFIG_PHYS_64BIT
 377 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 378 #else
 379 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 380 #endif
 381 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 382 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 383 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 384 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 385 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 386 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 387                                         CONFIG_SYS_BMAN_CENA_SIZE)
 388 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 389 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 390 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 391 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 392 #ifdef CONFIG_PHYS_64BIT
 393 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 394 #else
 395 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 396 #endif
 397 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 398 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 399 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 400 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 401 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 402 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 403                                         CONFIG_SYS_QMAN_CENA_SIZE)
 404 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 405 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 406
 407 #define CONFIG_SYS_DPAA_FMAN
 408 #define CONFIG_SYS_DPAA_PME
 409 /* Default address of microcode for the Linux Fman driver */
 410 #if defined(CONFIG_SPIFLASH)
 411 /*
 412  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 413  * env, so we got 0x110000.
 414  */
 415 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 416 #elif defined(CONFIG_SDCARD)
 417 /*
 418  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 419  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 420  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 421  */
 422 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 423 #elif defined(CONFIG_MTD_RAW_NAND)
 424 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 425 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 426 /*
 427  * Slave has no ucode locally, it can fetch this from remote. When implementing
 428  * in two corenet boards, slave's ucode could be stored in master's memory
 429  * space, the address can be mapped from slave TLB->slave LAW->
 430  * slave SRIO or PCIE outbound window->master inbound window->
 431  * master LAW->the ucode address in master's memory space.
 432  */
 433 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 434 #else
 435 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 436 #endif
 437 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 438 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 439
 440 #ifdef CONFIG_PCI
 441 #if !defined(CONFIG_DM_PCI)
 442 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 443 #define CONFIG_PCI_INDIRECT_BRIDGE
 444 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 445 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 446 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 447 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 448 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 449 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 450 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 451 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 452 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 453 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 454 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 455 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 456 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 457 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 458 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 459 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 460 #endif
 461
 462 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 463 #endif  /* CONFIG_PCI */
 464
 465 /* SATA */
 466 #ifdef CONFIG_FSL_SATA_V2
 467 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 468 #define CONFIG_SATA1
 469 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 470 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 471 #define CONFIG_SATA2
 472 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 473 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 474
 475 #define CONFIG_LBA48
 476 #endif
 477
 478 #ifdef CONFIG_FMAN_ENET
 479 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 480 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 481 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 482 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 483 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 484
 485 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 486 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 487 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 488 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 489 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 490
 491 #define CONFIG_SYS_TBIPA_VALUE  8
 492 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 493 #endif
 494
 495 /*
 496  * Environment
 497  */
 498 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 499 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 500
 501 /*
 502 * USB
 503 */
 504 #define CONFIG_HAS_FSL_DR_USB
 505 #define CONFIG_HAS_FSL_MPH_USB
 506
 507 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 508 #define CONFIG_USB_EHCI_FSL
 509 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 510 #endif
 511
 512 #ifdef CONFIG_MMC
 513 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 514 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 515 #endif
 516
 517 /*
 518  * Miscellaneous configurable options
 519  */
 520 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 521
 522 /*
 523  * For booting Linux, the board info and command line data
 524  * have to be in the first 64 MB of memory, since this is
 525  * the maximum mapped by the Linux kernel during initialization.
 526  */
 527 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 528 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 529
 530 #ifdef CONFIG_CMD_KGDB
 531 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 532 #endif
 533
 534 /*
 535  * Environment Configuration
 536  */
 537 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 538 #define CONFIG_BOOTFILE         "uImage"
 539 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 540
 541 /* default location for tftp and bootm */
 542 #define CONFIG_LOADADDR         1000000
 543
 544 #ifdef CONFIG_TARGET_P4080DS
 545 #define __USB_PHY_TYPE  ulpi
 546 #else
 547 #define __USB_PHY_TYPE  utmi
 548 #endif
 549
 550 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 551         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 552         "bank_intlv=cs0_cs1;"                                   \
 553         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 554         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 555         "netdev=eth0\0"                                         \
 556         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 557         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 558         "tftpflash=tftpboot $loadaddr $uboot && "               \
 559         "protect off $ubootaddr +$filesize && "                 \
 560         "erase $ubootaddr +$filesize && "                       \
 561         "cp.b $loadaddr $ubootaddr $filesize && "               \
 562         "protect on $ubootaddr +$filesize && "                  \
 563         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 564         "consoledev=ttyS0\0"                                    \
 565         "ramdiskaddr=2000000\0"                                 \
 566         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 567         "fdtaddr=1e00000\0"                                     \
 568         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 569         "bdev=sda3\0"
 570
 571 #define CONFIG_HDBOOT                                   \
 572         "setenv bootargs root=/dev/$bdev rw "           \
 573         "console=$consoledev,$baudrate $othbootargs;"   \
 574         "tftp $loadaddr $bootfile;"                     \
 575         "tftp $fdtaddr $fdtfile;"                       \
 576         "bootm $loadaddr - $fdtaddr"
 577
 578 #define CONFIG_NFSBOOTCOMMAND                   \
 579         "setenv bootargs root=/dev/nfs rw "     \
 580         "nfsroot=$serverip:$rootpath "          \
 581         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 582         "console=$consoledev,$baudrate $othbootargs;"   \
 583         "tftp $loadaddr $bootfile;"             \
 584         "tftp $fdtaddr $fdtfile;"               \
 585         "bootm $loadaddr - $fdtaddr"
 586
 587 #define CONFIG_RAMBOOTCOMMAND                           \
 588         "setenv bootargs root=/dev/ram rw "             \
 589         "console=$consoledev,$baudrate $othbootargs;"   \
 590         "tftp $ramdiskaddr $ramdiskfile;"               \
 591         "tftp $loadaddr $bootfile;"                     \
 592         "tftp $fdtaddr $fdtfile;"                       \
 593         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 594
 595 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 596
 597 #include <asm/fsl_secure_boot.h>
 598
 599 #endif  /* __CONFIG_H */