include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #include "../board/freescale/common/ics307_clk.h"
  30
  31 #ifdef CONFIG_RAMBOOT_PBL
  32 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  34 #endif
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE
  38 #define CONFIG_E500                     /* BOOKE e500 family */
  39 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  40 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  41 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  42 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  43 #define CONFIG_MP                       /* support multiple processors */
  44
  45 #ifndef CONFIG_SYS_TEXT_BASE
  46 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  47 #endif
  48
  49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  51 #endif
  52
  53 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  54 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  55 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  56 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  57 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  58 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  59 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  60 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  61 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  62
  63 #define CONFIG_SYS_SRIO
  64 #define CONFIG_SRIO1                    /* SRIO port 1 */
  65 #define CONFIG_SRIO2                    /* SRIO port 2 */
  66
  67 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  68
  69 #define CONFIG_ENV_OVERWRITE
  70
  71 #ifdef CONFIG_SYS_NO_FLASH
  72 #define CONFIG_ENV_IS_NOWHERE
  73 #else
  74 #define CONFIG_FLASH_CFI_DRIVER
  75 #define CONFIG_SYS_FLASH_CFI
  76 #endif
  77
  78 #if defined(CONFIG_SPIFLASH)
  79 #define CONFIG_SYS_EXTRA_ENV_RELOC
  80 #define CONFIG_ENV_IS_IN_SPI_FLASH
  81 #define CONFIG_ENV_SPI_BUS              0
  82 #define CONFIG_ENV_SPI_CS               0
  83 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  84 #define CONFIG_ENV_SPI_MODE             0
  85 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  86 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  87 #define CONFIG_ENV_SECT_SIZE            0x10000
  88 #elif defined(CONFIG_SDCARD)
  89 #define CONFIG_SYS_EXTRA_ENV_RELOC
  90 #define CONFIG_ENV_IS_IN_MMC
  91 #define CONFIG_SYS_MMC_ENV_DEV          0
  92 #define CONFIG_ENV_SIZE                 0x2000
  93 #define CONFIG_ENV_OFFSET               (512 * 1097)
  94 #else
  95 #define CONFIG_ENV_IS_IN_FLASH
  96 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  97 #define CONFIG_ENV_SIZE         0x2000
  98 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  99 #endif
 100
 101 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 102
 103 /*
 104  * These can be toggled for performance analysis, otherwise use default.
 105  */
 106 #define CONFIG_SYS_CACHE_STASHING
 107 #define CONFIG_BACKSIDE_L2_CACHE
 108 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 109 #define CONFIG_BTB                      /* toggle branch predition */
 110 #define CONFIG_DDR_ECC
 111 #ifdef CONFIG_DDR_ECC
 112 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 113 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 114 #endif
 115
 116 #define CONFIG_ENABLE_36BIT_PHYS
 117
 118 #ifdef CONFIG_PHYS_64BIT
 119 #define CONFIG_ADDR_MAP
 120 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 121 #endif
 122
 123 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 124 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 125 #define CONFIG_SYS_MEMTEST_END          0x00400000
 126 #define CONFIG_SYS_ALT_MEMTEST
 127 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 128
 129 /*
 130  *  Config the L3 Cache as L3 SRAM
 131  */
 132 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 135 #else
 136 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 137 #endif
 138 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 139 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 140
 141 /*
 142  * Base addresses -- Note these are effective addresses where the
 143  * actual resources get mapped (not physical addresses)
 144  */
 145 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xfe000000      /* CCSRBAR Default */
 146 #define CONFIG_SYS_CCSRBAR              0xfe000000      /* relocated CCSRBAR */
 147 #ifdef CONFIG_PHYS_64BIT
 148 #define CONFIG_SYS_CCSRBAR_PHYS         0xffe000000ull  /* physical addr of CCSRBAR */
 149 #else
 150 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 151 #endif
 152 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 153
 154 #ifdef CONFIG_PHYS_64BIT
 155 #define CONFIG_SYS_DCSRBAR              0xf0000000
 156 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 157 #endif
 158
 159 /* EEPROM */
 160 #define CONFIG_ID_EEPROM
 161 #define CONFIG_SYS_I2C_EEPROM_NXID
 162 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 163 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 164 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 165
 166 /*
 167  * DDR Setup
 168  */
 169 #define CONFIG_VERY_BIG_RAM
 170 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 171 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 172
 173 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 174 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 175
 176 #define CONFIG_DDR_SPD
 177 #define CONFIG_FSL_DDR3
 178
 179 #define CONFIG_SYS_SPD_BUS_NUM  1
 180 #define SPD_EEPROM_ADDRESS1     0x51
 181 #define SPD_EEPROM_ADDRESS2     0x52
 182 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 183 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 184
 185 /*
 186  * Local Bus Definitions
 187  */
 188
 189 /* Set the local bus clock 1/8 of platform clock */
 190 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 191
 192 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 193 #ifdef CONFIG_PHYS_64BIT
 194 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 195 #else
 196 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 197 #endif
 198
 199 #define CONFIG_SYS_BR0_PRELIM \
 200         (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 201          BR_PS_16 | BR_V)
 202 #define CONFIG_SYS_OR0_PRELIM   ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 203                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 204
 205 #define CONFIG_SYS_BR1_PRELIM \
 206         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 207 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 208
 209 #define CONFIG_FSL_NGPIXIS              /* use common ngPIXIS code */
 210 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 211 #ifdef CONFIG_PHYS_64BIT
 212 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 213 #else
 214 #define PIXIS_BASE_PHYS         PIXIS_BASE
 215 #endif
 216
 217 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 218 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 219
 220 #define PIXIS_LBMAP_SWITCH      7
 221 #define PIXIS_LBMAP_MASK        0xf0
 222 #define PIXIS_LBMAP_SHIFT       4
 223 #define PIXIS_LBMAP_ALTBANK     0x40
 224
 225 #define CONFIG_SYS_FLASH_QUIET_TEST
 226 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 227
 228 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 229 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 230 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 231 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 232
 233 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 234
 235 #if defined(CONFIG_RAMBOOT_PBL)
 236 #define CONFIG_SYS_RAMBOOT
 237 #endif
 238
 239 /* Nand Flash */
 240 #if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
 241 #define CONFIG_NAND_FSL_ELBC
 242 #ifdef CONFIG_NAND_FSL_ELBC
 243 #define CONFIG_SYS_NAND_BASE            0xffa00000
 244 #ifdef CONFIG_PHYS_64BIT
 245 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 246 #else
 247 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 248 #endif
 249
 250 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 251 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 252 #define CONFIG_MTD_NAND_VERIFY_WRITE
 253 #define CONFIG_CMD_NAND
 254 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 255
 256 /* NAND flash config */
 257 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 258                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 259                                | BR_PS_8               /* Port Size = 8 bit */ \
 260                                | BR_MS_FCM             /* MSEL = FCM */ \
 261                                | BR_V)                 /* valid */
 262 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 263                                | OR_FCM_PGS            /* Large Page*/ \
 264                                | OR_FCM_CSCT \
 265                                | OR_FCM_CST \
 266                                | OR_FCM_CHT \
 267                                | OR_FCM_SCY_1 \
 268                                | OR_FCM_TRLX \
 269                                | OR_FCM_EHTR)
 270
 271 #define CONFIG_SYS_BR2_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 272 #define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 273 #endif /* CONFIG_NAND_FSL_ELBC */
 274 #endif
 275
 276 #define CONFIG_SYS_FLASH_EMPTY_INFO
 277 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 278 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 279
 280 #define CONFIG_BOARD_EARLY_INIT_F
 281 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 282 #define CONFIG_MISC_INIT_R
 283
 284 #define CONFIG_HWCONFIG
 285
 286 /* define to use L1 as initial stack */
 287 #define CONFIG_L1_INIT_RAM
 288 #define CONFIG_SYS_INIT_RAM_LOCK
 289 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 290 #ifdef CONFIG_PHYS_64BIT
 291 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 292 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 293 /* The assembler doesn't like typecast */
 294 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 295         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 296           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 297 #else
 298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 300 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 301 #endif
 302 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 303
 304 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 305 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 306
 307 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 308 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 309
 310 /* Serial Port - controlled on board with jumper J8
 311  * open - index 2
 312  * shorted - index 1
 313  */
 314 #define CONFIG_CONS_INDEX       1
 315 #define CONFIG_SYS_NS16550
 316 #define CONFIG_SYS_NS16550_SERIAL
 317 #define CONFIG_SYS_NS16550_REG_SIZE     1
 318 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 319
 320 #define CONFIG_SYS_BAUDRATE_TABLE       \
 321         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 322
 323 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 324 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 325 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 326 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 327
 328 /* Use the HUSH parser */
 329 #define CONFIG_SYS_HUSH_PARSER
 330 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 331
 332 /* pass open firmware flat tree */
 333 #define CONFIG_OF_LIBFDT
 334 #define CONFIG_OF_BOARD_SETUP
 335 #define CONFIG_OF_STDOUT_VIA_ALIAS
 336
 337 /* new uImage format support */
 338 #define CONFIG_FIT
 339 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 340
 341 /* I2C */
 342 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 343 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 344 #define CONFIG_I2C_MULTI_BUS
 345 #define CONFIG_I2C_CMD_TREE
 346 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 347 #define CONFIG_SYS_I2C_SLAVE            0x7F
 348 #define CONFIG_SYS_I2C_OFFSET           0x118000
 349 #define CONFIG_SYS_I2C2_OFFSET          0x118100
 350
 351 /*
 352  * RapidIO
 353  */
 354 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 355 #ifdef CONFIG_PHYS_64BIT
 356 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 357 #else
 358 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 359 #endif
 360 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 361
 362 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 363 #ifdef CONFIG_PHYS_64BIT
 364 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 365 #else
 366 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 367 #endif
 368 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 369
 370 /*
 371  * eSPI - Enhanced SPI
 372  */
 373 #define CONFIG_FSL_ESPI
 374 #define CONFIG_SPI_FLASH
 375 #define CONFIG_SPI_FLASH_SPANSION
 376 #define CONFIG_CMD_SF
 377 #define CONFIG_SF_DEFAULT_SPEED         10000000
 378 #define CONFIG_SF_DEFAULT_MODE          0
 379
 380 /*
 381  * General PCI
 382  * Memory space is mapped 1-1, but I/O space must start from 0.
 383  */
 384
 385 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 386 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 387 #ifdef CONFIG_PHYS_64BIT
 388 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 389 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 390 #else
 391 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 392 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 393 #endif
 394 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 395 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 396 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 397 #ifdef CONFIG_PHYS_64BIT
 398 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 399 #else
 400 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 401 #endif
 402 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 403
 404 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 405 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 406 #ifdef CONFIG_PHYS_64BIT
 407 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 408 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 409 #else
 410 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 411 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 412 #endif
 413 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 414 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 415 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 416 #ifdef CONFIG_PHYS_64BIT
 417 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 418 #else
 419 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 420 #endif
 421 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 422
 423 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 424 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 425 #ifdef CONFIG_PHYS_64BIT
 426 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 427 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 428 #else
 429 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 430 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 431 #endif
 432 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 433 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 434 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 435 #ifdef CONFIG_PHYS_64BIT
 436 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 437 #else
 438 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 439 #endif
 440 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 441
 442 /* controller 4, Base address 203000 */
 443 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 444 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 445 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 446 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 447 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 448 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 449
 450 /* Qman/Bman */
 451 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 452 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 453 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 454 #ifdef CONFIG_PHYS_64BIT
 455 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 456 #else
 457 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 458 #endif
 459 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 460 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 461 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 462 #ifdef CONFIG_PHYS_64BIT
 463 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 464 #else
 465 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 466 #endif
 467 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 468
 469 #define CONFIG_SYS_DPAA_FMAN
 470 #define CONFIG_SYS_DPAA_PME
 471 /* Default address of microcode for the Linux Fman driver */
 472 #define CONFIG_SYS_FMAN_FW_ADDR         0xEF000000
 473 #ifdef CONFIG_PHYS_64BIT
 474 #define CONFIG_SYS_FMAN_FW_ADDR_PHYS    0xFEF000000ULL
 475 #else
 476 #define CONFIG_SYS_FMAN_FW_ADDR_PHYS    CONFIG_SYS_FMAN_FW_ADDR
 477 #endif
 478
 479 #ifdef CONFIG_SYS_DPAA_FMAN
 480 #define CONFIG_FMAN_ENET
 481 #endif
 482
 483 #ifdef CONFIG_PCI
 484 #define CONFIG_NET_MULTI
 485 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 486 #define CONFIG_E1000
 487
 488 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 489 #define CONFIG_DOS_PARTITION
 490 #endif  /* CONFIG_PCI */
 491
 492 /* SATA */
 493 #ifdef CONFIG_FSL_SATA_V2
 494 #define CONFIG_LIBATA
 495 #define CONFIG_FSL_SATA
 496
 497 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 498 #define CONFIG_SATA1
 499 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 500 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 501 #define CONFIG_SATA2
 502 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 503 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 504
 505 #define CONFIG_LBA48
 506 #define CONFIG_CMD_SATA
 507 #define CONFIG_DOS_PARTITION
 508 #define CONFIG_CMD_EXT2
 509 #endif
 510
 511 #ifdef CONFIG_FMAN_ENET
 512 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 513 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 514 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 515 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 516 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 517
 518 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 519 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 520 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 521 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 522 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 523
 524 #define CONFIG_SYS_TBIPA_VALUE  8
 525 #define CONFIG_MII              /* MII PHY management */
 526 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 527 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 528 #endif
 529
 530 /*
 531  * Environment
 532  */
 533 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 534 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 535
 536 /*
 537  * Command line configuration.
 538  */
 539 #include <config_cmd_default.h>
 540
 541 #define CONFIG_CMD_DHCP
 542 #define CONFIG_CMD_ELF
 543 #define CONFIG_CMD_ERRATA
 544 #define CONFIG_CMD_GREPENV
 545 #define CONFIG_CMD_IRQ
 546 #define CONFIG_CMD_I2C
 547 #define CONFIG_CMD_MII
 548 #define CONFIG_CMD_PING
 549 #define CONFIG_CMD_SETEXPR
 550
 551 #ifdef CONFIG_PCI
 552 #define CONFIG_CMD_PCI
 553 #define CONFIG_CMD_NET
 554 #endif
 555
 556 /*
 557 * USB
 558 */
 559 #define CONFIG_CMD_USB
 560 #define CONFIG_USB_STORAGE
 561 #define CONFIG_USB_EHCI
 562 #define CONFIG_USB_EHCI_FSL
 563 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 564 #define CONFIG_CMD_EXT2
 565
 566 #define CONFIG_MMC
 567
 568 #ifdef CONFIG_MMC
 569 #define CONFIG_FSL_ESDHC
 570 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 571 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 572 #define CONFIG_CMD_MMC
 573 #define CONFIG_GENERIC_MMC
 574 #define CONFIG_CMD_EXT2
 575 #define CONFIG_CMD_FAT
 576 #define CONFIG_DOS_PARTITION
 577 #endif
 578
 579 /*
 580  * Miscellaneous configurable options
 581  */
 582 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 583 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 584 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 585 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 586 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 587 #ifdef CONFIG_CMD_KGDB
 588 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 589 #else
 590 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 591 #endif
 592 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 593 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 594 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 595 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 596
 597 /*
 598  * For booting Linux, the board info and command line data
 599  * have to be in the first 64 MB of memory, since this is
 600  * the maximum mapped by the Linux kernel during initialization.
 601  */
 602 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 603 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 604
 605 #ifdef CONFIG_CMD_KGDB
 606 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 607 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 608 #endif
 609
 610 /*
 611  * Environment Configuration
 612  */
 613 #define CONFIG_ROOTPATH         /opt/nfsroot
 614 #define CONFIG_BOOTFILE         uImage
 615 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 616
 617 /* default location for tftp and bootm */
 618 #define CONFIG_LOADADDR         1000000
 619
 620 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 621
 622 #define CONFIG_BAUDRATE 115200
 623
 624 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 625         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 626         "bank_intlv=cs0_cs1\0"                                  \
 627         "netdev=eth0\0"                                         \
 628         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                  \
 629         "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"                  \
 630         "tftpflash=tftpboot $loadaddr $uboot && "               \
 631         "protect off $ubootaddr +$filesize && "                 \
 632         "erase $ubootaddr +$filesize && "                       \
 633         "cp.b $loadaddr $ubootaddr $filesize && "               \
 634         "protect on $ubootaddr +$filesize && "                  \
 635         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 636         "consoledev=ttyS0\0"                                    \
 637         "ramdiskaddr=2000000\0"                                 \
 638         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 639         "fdtaddr=c00000\0"                                      \
 640         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 641         "bdev=sda3\0"                                           \
 642         "c=ffe\0"                                               \
 643         "fman_ucode="MK_STR(CONFIG_SYS_FMAN_FW_ADDR_PHYS)"\0"
 644
 645 #define CONFIG_HDBOOT                                   \
 646         "setenv bootargs root=/dev/$bdev rw "           \
 647         "console=$consoledev,$baudrate $othbootargs;"   \
 648         "tftp $loadaddr $bootfile;"                     \
 649         "tftp $fdtaddr $fdtfile;"                       \
 650         "bootm $loadaddr - $fdtaddr"
 651
 652 #define CONFIG_NFSBOOTCOMMAND                   \
 653         "setenv bootargs root=/dev/nfs rw "     \
 654         "nfsroot=$serverip:$rootpath "          \
 655         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 656         "console=$consoledev,$baudrate $othbootargs;"   \
 657         "tftp $loadaddr $bootfile;"             \
 658         "tftp $fdtaddr $fdtfile;"               \
 659         "bootm $loadaddr - $fdtaddr"
 660
 661 #define CONFIG_RAMBOOTCOMMAND                           \
 662         "setenv bootargs root=/dev/ram rw "             \
 663         "console=$consoledev,$baudrate $othbootargs;"   \
 664         "tftp $ramdiskaddr $ramdiskfile;"               \
 665         "tftp $loadaddr $bootfile;"                     \
 666         "tftp $fdtaddr $fdtfile;"                       \
 667         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 668
 669 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 670
 671 #endif  /* __CONFIG_H */