include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * Corenet DS style board configuration file
   8  */
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/freescale/common/ics307_clk.h"
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15 #ifdef CONFIG_NXP_ESBC
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #ifdef CONFIG_MTD_RAW_NAND
  19 #define CONFIG_RAMBOOT_NAND
  20 #endif
  21 #define CONFIG_BOOTSCRIPT_COPY_RAM
  22 #else
  23 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  24 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  25 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  26 #if defined(CONFIG_TARGET_P3041DS)
  27 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  28 #elif defined(CONFIG_TARGET_P4080DS)
  29 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  30 #elif defined(CONFIG_TARGET_P5020DS)
  31 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  32 #elif defined(CONFIG_TARGET_P5040DS)
  33 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  34 #endif
  35 #endif
  36 #endif
  37
  38 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  39 /* Set 1M boot space */
  40 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  41 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  42                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  43 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  44 #endif
  45
  46 /* High Level Configuration Options */
  47 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  48
  49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  50 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  51 #endif
  52
  53 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  54 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  55 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  56 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  57 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  58
  59 #define CONFIG_ENV_OVERWRITE
  60
  61 #if defined(CONFIG_SPIFLASH)
  62 #elif defined(CONFIG_SDCARD)
  63 #define CONFIG_FSL_FIXED_MMC_LOCATION
  64 #define CONFIG_SYS_MMC_ENV_DEV          0
  65 #endif
  66
  67 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  68
  69 /*
  70  * These can be toggled for performance analysis, otherwise use default.
  71  */
  72 #define CONFIG_SYS_CACHE_STASHING
  73 #define CONFIG_BACKSIDE_L2_CACHE
  74 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  75 #define CONFIG_BTB                      /* toggle branch predition */
  76 #define CONFIG_DDR_ECC
  77 #ifdef CONFIG_DDR_ECC
  78 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  79 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  80 #endif
  81
  82 #define CONFIG_ENABLE_36BIT_PHYS
  83
  84 #ifdef CONFIG_PHYS_64BIT
  85 #define CONFIG_ADDR_MAP
  86 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  87 #endif
  88
  89 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  90 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  91 #define CONFIG_SYS_MEMTEST_END          0x00400000
  92
  93 /*
  94  *  Config the L3 Cache as L3 SRAM
  95  */
  96 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  97 #ifdef CONFIG_PHYS_64BIT
  98 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  99 #else
 100 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 101 #endif
 102 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 103 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 104
 105 #ifdef CONFIG_PHYS_64BIT
 106 #define CONFIG_SYS_DCSRBAR              0xf0000000
 107 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 108 #endif
 109
 110 /* EEPROM */
 111 #define CONFIG_ID_EEPROM
 112 #define CONFIG_SYS_I2C_EEPROM_NXID
 113 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 114 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 116
 117 /*
 118  * DDR Setup
 119  */
 120 #define CONFIG_VERY_BIG_RAM
 121 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 122 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 123
 124 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 125 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 126
 127 #define CONFIG_DDR_SPD
 128
 129 #define CONFIG_SYS_SPD_BUS_NUM  1
 130 #define SPD_EEPROM_ADDRESS1     0x51
 131 #define SPD_EEPROM_ADDRESS2     0x52
 132 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 133 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 134
 135 /*
 136  * Local Bus Definitions
 137  */
 138
 139 /* Set the local bus clock 1/8 of platform clock */
 140 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 141
 142 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 143 #ifdef CONFIG_PHYS_64BIT
 144 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 145 #else
 146 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 147 #endif
 148
 149 #define CONFIG_SYS_FLASH_BR_PRELIM \
 150                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 151                  | BR_PS_16 | BR_V)
 152 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 153                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 154
 155 #define CONFIG_SYS_BR1_PRELIM \
 156         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 157 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 158
 159 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 160 #ifdef CONFIG_PHYS_64BIT
 161 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 162 #else
 163 #define PIXIS_BASE_PHYS         PIXIS_BASE
 164 #endif
 165
 166 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 167 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 168
 169 #define PIXIS_LBMAP_SWITCH      7
 170 #define PIXIS_LBMAP_MASK        0xf0
 171 #define PIXIS_LBMAP_SHIFT       4
 172 #define PIXIS_LBMAP_ALTBANK     0x40
 173
 174 #define CONFIG_SYS_FLASH_QUIET_TEST
 175 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 176
 177 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 178 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 179 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 180 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 181
 182 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 183
 184 #if defined(CONFIG_RAMBOOT_PBL)
 185 #define CONFIG_SYS_RAMBOOT
 186 #endif
 187
 188 /* Nand Flash */
 189 #ifdef CONFIG_NAND_FSL_ELBC
 190 #define CONFIG_SYS_NAND_BASE            0xffa00000
 191 #ifdef CONFIG_PHYS_64BIT
 192 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 193 #else
 194 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 195 #endif
 196
 197 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 198 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 199 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 200
 201 /* NAND flash config */
 202 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 203                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 204                                | BR_PS_8               /* Port Size = 8 bit */ \
 205                                | BR_MS_FCM             /* MSEL = FCM */ \
 206                                | BR_V)                 /* valid */
 207 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 208                                | OR_FCM_PGS            /* Large Page*/ \
 209                                | OR_FCM_CSCT \
 210                                | OR_FCM_CST \
 211                                | OR_FCM_CHT \
 212                                | OR_FCM_SCY_1 \
 213                                | OR_FCM_TRLX \
 214                                | OR_FCM_EHTR)
 215
 216 #ifdef CONFIG_MTD_RAW_NAND
 217 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 218 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 219 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 220 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 221 #else
 222 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 223 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 224 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 225 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 226 #endif
 227 #else
 228 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 229 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 230 #endif /* CONFIG_NAND_FSL_ELBC */
 231
 232 #define CONFIG_SYS_FLASH_EMPTY_INFO
 233 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 234 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 235
 236 #define CONFIG_HWCONFIG
 237
 238 /* define to use L1 as initial stack */
 239 #define CONFIG_L1_INIT_RAM
 240 #define CONFIG_SYS_INIT_RAM_LOCK
 241 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 242 #ifdef CONFIG_PHYS_64BIT
 243 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 244 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 245 /* The assembler doesn't like typecast */
 246 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 247         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 248           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 249 #else
 250 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 251 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 252 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 253 #endif
 254 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 255
 256 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 257 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 258
 259 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 260 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 261
 262 /* Serial Port - controlled on board with jumper J8
 263  * open - index 2
 264  * shorted - index 1
 265  */
 266 #define CONFIG_SYS_NS16550_SERIAL
 267 #define CONFIG_SYS_NS16550_REG_SIZE     1
 268 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 269
 270 #define CONFIG_SYS_BAUDRATE_TABLE       \
 271         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 272
 273 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 274 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 275 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 276 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 277
 278 /* I2C */
 279 #define CONFIG_SYS_I2C
 280 #define CONFIG_SYS_I2C_FSL
 281 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 282 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 283 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 284 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 285 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 286 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 287
 288 /*
 289  * RapidIO
 290  */
 291 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 292 #ifdef CONFIG_PHYS_64BIT
 293 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 294 #else
 295 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 296 #endif
 297 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 298
 299 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 300 #ifdef CONFIG_PHYS_64BIT
 301 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 302 #else
 303 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 304 #endif
 305 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 306
 307 /*
 308  * for slave u-boot IMAGE instored in master memory space,
 309  * PHYS must be aligned based on the SIZE
 310  */
 311 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 312 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 313 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 314 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 315 /*
 316  * for slave UCODE and ENV instored in master memory space,
 317  * PHYS must be aligned based on the SIZE
 318  */
 319 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 320 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 321 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 322
 323 /* slave core release by master*/
 324 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 325 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 326
 327 /*
 328  * SRIO_PCIE_BOOT - SLAVE
 329  */
 330 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 331 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 332 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 333                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 334 #endif
 335
 336 /*
 337  * eSPI - Enhanced SPI
 338  */
 339
 340 /*
 341  * General PCI
 342  * Memory space is mapped 1-1, but I/O space must start from 0.
 343  */
 344
 345 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 346 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 347 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 348 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 349 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 350
 351 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 352 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 353 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 354 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 355 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 356
 357 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 358 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 359 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 360 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 361 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 362
 363 /* controller 4, Base address 203000 */
 364 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 365 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 366
 367 /* Qman/Bman */
 368 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 369 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 370 #ifdef CONFIG_PHYS_64BIT
 371 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 372 #else
 373 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 374 #endif
 375 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 376 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 377 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 378 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 379 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 380 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 381                                         CONFIG_SYS_BMAN_CENA_SIZE)
 382 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 383 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 384 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 385 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 386 #ifdef CONFIG_PHYS_64BIT
 387 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 388 #else
 389 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 390 #endif
 391 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 392 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 393 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 394 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 395 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 396 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 397                                         CONFIG_SYS_QMAN_CENA_SIZE)
 398 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 399 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 400
 401 #define CONFIG_SYS_DPAA_FMAN
 402 #define CONFIG_SYS_DPAA_PME
 403 /* Default address of microcode for the Linux Fman driver */
 404 #if defined(CONFIG_SPIFLASH)
 405 /*
 406  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 407  * env, so we got 0x110000.
 408  */
 409 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 410 #elif defined(CONFIG_SDCARD)
 411 /*
 412  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 413  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 414  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 415  */
 416 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 417 #elif defined(CONFIG_MTD_RAW_NAND)
 418 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 419 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 420 /*
 421  * Slave has no ucode locally, it can fetch this from remote. When implementing
 422  * in two corenet boards, slave's ucode could be stored in master's memory
 423  * space, the address can be mapped from slave TLB->slave LAW->
 424  * slave SRIO or PCIE outbound window->master inbound window->
 425  * master LAW->the ucode address in master's memory space.
 426  */
 427 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 428 #else
 429 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 430 #endif
 431 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 432 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 433
 434 #ifdef CONFIG_PCI
 435 #if !defined(CONFIG_DM_PCI)
 436 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 437 #define CONFIG_PCI_INDIRECT_BRIDGE
 438 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 439 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 440 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 441 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 442 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 443 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 444 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 445 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 446 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 447 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 448 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 449 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 450 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 451 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 452 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 453 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 454 #endif
 455
 456 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 457 #endif  /* CONFIG_PCI */
 458
 459 /* SATA */
 460 #ifdef CONFIG_FSL_SATA_V2
 461 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 462 #define CONFIG_SATA1
 463 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 464 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 465 #define CONFIG_SATA2
 466 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 467 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 468
 469 #define CONFIG_LBA48
 470 #endif
 471
 472 #ifdef CONFIG_FMAN_ENET
 473 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 474 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 475 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 476 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 477 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 478
 479 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 480 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 481 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 482 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 483 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 484
 485 #define CONFIG_SYS_TBIPA_VALUE  8
 486 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 487 #endif
 488
 489 /*
 490  * Environment
 491  */
 492 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 493 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 494
 495 /*
 496 * USB
 497 */
 498 #define CONFIG_HAS_FSL_DR_USB
 499 #define CONFIG_HAS_FSL_MPH_USB
 500
 501 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 502 #define CONFIG_USB_EHCI_FSL
 503 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 504 #endif
 505
 506 #ifdef CONFIG_MMC
 507 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 508 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 509 #endif
 510
 511 /*
 512  * Miscellaneous configurable options
 513  */
 514 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 515
 516 /*
 517  * For booting Linux, the board info and command line data
 518  * have to be in the first 64 MB of memory, since this is
 519  * the maximum mapped by the Linux kernel during initialization.
 520  */
 521 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 522 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 523
 524 #ifdef CONFIG_CMD_KGDB
 525 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 526 #endif
 527
 528 /*
 529  * Environment Configuration
 530  */
 531 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 532 #define CONFIG_BOOTFILE         "uImage"
 533 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 534
 535 /* default location for tftp and bootm */
 536 #define CONFIG_LOADADDR         1000000
 537
 538 #ifdef CONFIG_TARGET_P4080DS
 539 #define __USB_PHY_TYPE  ulpi
 540 #else
 541 #define __USB_PHY_TYPE  utmi
 542 #endif
 543
 544 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 545         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 546         "bank_intlv=cs0_cs1;"                                   \
 547         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 548         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 549         "netdev=eth0\0"                                         \
 550         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 551         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 552         "tftpflash=tftpboot $loadaddr $uboot && "               \
 553         "protect off $ubootaddr +$filesize && "                 \
 554         "erase $ubootaddr +$filesize && "                       \
 555         "cp.b $loadaddr $ubootaddr $filesize && "               \
 556         "protect on $ubootaddr +$filesize && "                  \
 557         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 558         "consoledev=ttyS0\0"                                    \
 559         "ramdiskaddr=2000000\0"                                 \
 560         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 561         "fdtaddr=1e00000\0"                                     \
 562         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 563         "bdev=sda3\0"
 564
 565 #define CONFIG_HDBOOT                                   \
 566         "setenv bootargs root=/dev/$bdev rw "           \
 567         "console=$consoledev,$baudrate $othbootargs;"   \
 568         "tftp $loadaddr $bootfile;"                     \
 569         "tftp $fdtaddr $fdtfile;"                       \
 570         "bootm $loadaddr - $fdtaddr"
 571
 572 #define CONFIG_NFSBOOTCOMMAND                   \
 573         "setenv bootargs root=/dev/nfs rw "     \
 574         "nfsroot=$serverip:$rootpath "          \
 575         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 576         "console=$consoledev,$baudrate $othbootargs;"   \
 577         "tftp $loadaddr $bootfile;"             \
 578         "tftp $fdtaddr $fdtfile;"               \
 579         "bootm $loadaddr - $fdtaddr"
 580
 581 #define CONFIG_RAMBOOTCOMMAND                           \
 582         "setenv bootargs root=/dev/ram rw "             \
 583         "console=$consoledev,$baudrate $othbootargs;"   \
 584         "tftp $ramdiskaddr $ramdiskfile;"               \
 585         "tftp $loadaddr $bootfile;"                     \
 586         "tftp $fdtaddr $fdtfile;"                       \
 587         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 588
 589 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 590
 591 #include <asm/fsl_secure_boot.h>
 592
 593 #endif  /* __CONFIG_H */