include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #include "../board/freescale/common/ics307_clk.h"
  30
  31 #ifdef CONFIG_RAMBOOT_PBL
  32 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  34 #endif
  35
  36 #ifdef CONFIG_SRIOBOOT_SLAVE
  37 /* Set 1M boot space */
  38 #define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  39 #define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \
  40                 (0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR)
  41 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  42 #define CONFIG_SYS_NO_FLASH
  43 #endif
  44
  45 /* High Level Configuration Options */
  46 #define CONFIG_BOOKE
  47 #define CONFIG_E500                     /* BOOKE e500 family */
  48 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  49 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  50 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  51 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  52 #define CONFIG_MP                       /* support multiple processors */
  53
  54 #ifndef CONFIG_SYS_TEXT_BASE
  55 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  56 #endif
  57
  58 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  59 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  60 #endif
  61
  62 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  63 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  64 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  65 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  66 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  67 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  68 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  70
  71 #define CONFIG_SYS_SRIO
  72 #define CONFIG_SRIO1                    /* SRIO port 1 */
  73 #define CONFIG_SRIO2                    /* SRIO port 2 */
  74
  75 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  76
  77 #define CONFIG_ENV_OVERWRITE
  78
  79 #ifdef CONFIG_SYS_NO_FLASH
  80 #define CONFIG_ENV_IS_NOWHERE
  81 #else
  82 #define CONFIG_FLASH_CFI_DRIVER
  83 #define CONFIG_SYS_FLASH_CFI
  84 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  85 #endif
  86
  87 #if defined(CONFIG_SPIFLASH)
  88 #define CONFIG_SYS_EXTRA_ENV_RELOC
  89 #define CONFIG_ENV_IS_IN_SPI_FLASH
  90 #define CONFIG_ENV_SPI_BUS              0
  91 #define CONFIG_ENV_SPI_CS               0
  92 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  93 #define CONFIG_ENV_SPI_MODE             0
  94 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  95 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  96 #define CONFIG_ENV_SECT_SIZE            0x10000
  97 #elif defined(CONFIG_SDCARD)
  98 #define CONFIG_SYS_EXTRA_ENV_RELOC
  99 #define CONFIG_ENV_IS_IN_MMC
 100 #define CONFIG_FSL_FIXED_MMC_LOCATION
 101 #define CONFIG_SYS_MMC_ENV_DEV          0
 102 #define CONFIG_ENV_SIZE                 0x2000
 103 #define CONFIG_ENV_OFFSET               (512 * 1097)
 104 #elif defined(CONFIG_NAND)
 105 #define CONFIG_SYS_EXTRA_ENV_RELOC
 106 #define CONFIG_ENV_IS_IN_NAND
 107 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 108 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 109 #elif defined(CONFIG_ENV_IS_NOWHERE)
 110 #define CONFIG_ENV_SIZE         0x2000
 111 #else
 112 #define CONFIG_ENV_IS_IN_FLASH
 113 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 114 #define CONFIG_ENV_SIZE         0x2000
 115 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 116 #endif
 117
 118 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 119
 120 /*
 121  * These can be toggled for performance analysis, otherwise use default.
 122  */
 123 #define CONFIG_SYS_CACHE_STASHING
 124 #define CONFIG_BACKSIDE_L2_CACHE
 125 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 126 #define CONFIG_BTB                      /* toggle branch predition */
 127 #define CONFIG_DDR_ECC
 128 #ifdef CONFIG_DDR_ECC
 129 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 130 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 131 #endif
 132
 133 #define CONFIG_ENABLE_36BIT_PHYS
 134
 135 #ifdef CONFIG_PHYS_64BIT
 136 #define CONFIG_ADDR_MAP
 137 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 138 #endif
 139
 140 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 141 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 142 #define CONFIG_SYS_MEMTEST_END          0x00400000
 143 #define CONFIG_SYS_ALT_MEMTEST
 144 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 145
 146 /*
 147  *  Config the L3 Cache as L3 SRAM
 148  */
 149 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 150 #ifdef CONFIG_PHYS_64BIT
 151 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 152 #else
 153 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 154 #endif
 155 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 156 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 157
 158 #ifdef CONFIG_PHYS_64BIT
 159 #define CONFIG_SYS_DCSRBAR              0xf0000000
 160 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 161 #endif
 162
 163 /* EEPROM */
 164 #define CONFIG_ID_EEPROM
 165 #define CONFIG_SYS_I2C_EEPROM_NXID
 166 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 167 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 168 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 169
 170 /*
 171  * DDR Setup
 172  */
 173 #define CONFIG_VERY_BIG_RAM
 174 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 175 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 176
 177 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 178 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 179
 180 #define CONFIG_DDR_SPD
 181 #define CONFIG_FSL_DDR3
 182
 183 #ifdef CONFIG_P3060QDS
 184 #define CONFIG_SYS_SPD_BUS_NUM  0
 185 #else
 186 #define CONFIG_SYS_SPD_BUS_NUM  1
 187 #endif
 188 #define SPD_EEPROM_ADDRESS1     0x51
 189 #define SPD_EEPROM_ADDRESS2     0x52
 190 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 191 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 192
 193 /*
 194  * Local Bus Definitions
 195  */
 196
 197 /* Set the local bus clock 1/8 of platform clock */
 198 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 199
 200 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 201 #ifdef CONFIG_PHYS_64BIT
 202 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 203 #else
 204 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 205 #endif
 206
 207 #define CONFIG_SYS_FLASH_BR_PRELIM \
 208                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
 209                  | BR_PS_16 | BR_V)
 210 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 211                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 212
 213 #define CONFIG_SYS_BR1_PRELIM \
 214         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 215 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 216
 217 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 218 #ifdef CONFIG_PHYS_64BIT
 219 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 220 #else
 221 #define PIXIS_BASE_PHYS         PIXIS_BASE
 222 #endif
 223
 224 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 225 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 226
 227 #define PIXIS_LBMAP_SWITCH      7
 228 #define PIXIS_LBMAP_MASK        0xf0
 229 #define PIXIS_LBMAP_SHIFT       4
 230 #define PIXIS_LBMAP_ALTBANK     0x40
 231
 232 #define CONFIG_SYS_FLASH_QUIET_TEST
 233 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 234
 235 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 236 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 237 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 238 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 239
 240 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 241
 242 #if defined(CONFIG_RAMBOOT_PBL)
 243 #define CONFIG_SYS_RAMBOOT
 244 #endif
 245
 246 /* Nand Flash */
 247 #ifdef CONFIG_NAND_FSL_ELBC
 248 #define CONFIG_SYS_NAND_BASE            0xffa00000
 249 #ifdef CONFIG_PHYS_64BIT
 250 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 251 #else
 252 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 253 #endif
 254
 255 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 256 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 257 #define CONFIG_MTD_NAND_VERIFY_WRITE
 258 #define CONFIG_CMD_NAND
 259 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 260
 261 /* NAND flash config */
 262 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 263                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 264                                | BR_PS_8               /* Port Size = 8 bit */ \
 265                                | BR_MS_FCM             /* MSEL = FCM */ \
 266                                | BR_V)                 /* valid */
 267 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 268                                | OR_FCM_PGS            /* Large Page*/ \
 269                                | OR_FCM_CSCT \
 270                                | OR_FCM_CST \
 271                                | OR_FCM_CHT \
 272                                | OR_FCM_SCY_1 \
 273                                | OR_FCM_TRLX \
 274                                | OR_FCM_EHTR)
 275
 276 #ifdef CONFIG_NAND
 277 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 278 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 279 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 280 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 281 #else
 282 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 283 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 284 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 285 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 286 #endif
 287 #else
 288 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 289 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 290 #endif /* CONFIG_NAND_FSL_ELBC */
 291
 292 #define CONFIG_SYS_FLASH_EMPTY_INFO
 293 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 294 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 295
 296 #define CONFIG_BOARD_EARLY_INIT_F
 297 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 298 #define CONFIG_MISC_INIT_R
 299
 300 #define CONFIG_HWCONFIG
 301
 302 /* define to use L1 as initial stack */
 303 #define CONFIG_L1_INIT_RAM
 304 #define CONFIG_SYS_INIT_RAM_LOCK
 305 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 306 #ifdef CONFIG_PHYS_64BIT
 307 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 309 /* The assembler doesn't like typecast */
 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 311         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 312           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 313 #else
 314 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 315 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 316 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 317 #endif
 318 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 319
 320 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 321 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 322
 323 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 324 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 325
 326 /* Serial Port - controlled on board with jumper J8
 327  * open - index 2
 328  * shorted - index 1
 329  */
 330 #define CONFIG_CONS_INDEX       1
 331 #define CONFIG_SYS_NS16550
 332 #define CONFIG_SYS_NS16550_SERIAL
 333 #define CONFIG_SYS_NS16550_REG_SIZE     1
 334 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 335
 336 #define CONFIG_SYS_BAUDRATE_TABLE       \
 337         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 338
 339 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 340 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 341 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 342 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 343
 344 /* Use the HUSH parser */
 345 #define CONFIG_SYS_HUSH_PARSER
 346 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 347
 348 /* pass open firmware flat tree */
 349 #define CONFIG_OF_LIBFDT
 350 #define CONFIG_OF_BOARD_SETUP
 351 #define CONFIG_OF_STDOUT_VIA_ALIAS
 352
 353 /* new uImage format support */
 354 #define CONFIG_FIT
 355 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 356
 357 /* I2C */
 358 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 359 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 360 #define CONFIG_I2C_MULTI_BUS
 361 #define CONFIG_I2C_CMD_TREE
 362 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 363 #define CONFIG_SYS_I2C_SLAVE            0x7F
 364 #define CONFIG_SYS_I2C_OFFSET           0x118000
 365 #define CONFIG_SYS_I2C2_OFFSET          0x118100
 366
 367 /*
 368  * RapidIO
 369  */
 370 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 371 #ifdef CONFIG_PHYS_64BIT
 372 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 373 #else
 374 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 375 #endif
 376 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 377
 378 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 379 #ifdef CONFIG_PHYS_64BIT
 380 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 381 #else
 382 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 383 #endif
 384 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 385
 386 /*
 387  * SRIOBOOT - MASTER
 388  */
 389 #ifdef CONFIG_SRIOBOOT_MASTER
 390 /* master port for srioboot*/
 391 #define CONFIG_SRIOBOOT_MASTER_PORT 0
 392 /* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */
 393 /*
 394  * for slave u-boot IMAGE instored in master memory space,
 395  * PHYS must be aligned based on the SIZE
 396  */
 397 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull
 398 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull
 399 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000        /* 512K */
 400 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull
 401 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull
 402 #endif
 403
 404 /*
 405  * SRIOBOOT - SLAVE
 406  */
 407 #ifdef CONFIG_SRIOBOOT_SLAVE
 408 /* slave port for srioboot */
 409 #define CONFIG_SRIOBOOT_SLAVE_PORT0
 410 /* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
 411 #endif
 412
 413 /*
 414  * eSPI - Enhanced SPI
 415  */
 416 #define CONFIG_FSL_ESPI
 417 #define CONFIG_SPI_FLASH
 418 #define CONFIG_SPI_FLASH_SPANSION
 419 #define CONFIG_CMD_SF
 420 #define CONFIG_SF_DEFAULT_SPEED         10000000
 421 #define CONFIG_SF_DEFAULT_MODE          0
 422
 423 /*
 424  * General PCI
 425  * Memory space is mapped 1-1, but I/O space must start from 0.
 426  */
 427
 428 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 429 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 430 #ifdef CONFIG_PHYS_64BIT
 431 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 432 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 433 #else
 434 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 435 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 436 #endif
 437 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 438 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 439 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 440 #ifdef CONFIG_PHYS_64BIT
 441 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 442 #else
 443 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 444 #endif
 445 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 446
 447 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 448 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 449 #ifdef CONFIG_PHYS_64BIT
 450 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 451 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 452 #else
 453 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 454 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 455 #endif
 456 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 457 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 458 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 461 #else
 462 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 463 #endif
 464 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 465
 466 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 467 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 468 #ifdef CONFIG_PHYS_64BIT
 469 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 470 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 471 #else
 472 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 473 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 474 #endif
 475 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 476 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 477 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 478 #ifdef CONFIG_PHYS_64BIT
 479 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 480 #else
 481 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 482 #endif
 483 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 484
 485 /* controller 4, Base address 203000 */
 486 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 487 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 488 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 489 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 490 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 491 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 492
 493 /* Qman/Bman */
 494 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 495 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 496 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 497 #ifdef CONFIG_PHYS_64BIT
 498 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 499 #else
 500 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 501 #endif
 502 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 503 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 504 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 505 #ifdef CONFIG_PHYS_64BIT
 506 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 507 #else
 508 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 509 #endif
 510 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 511
 512 #define CONFIG_SYS_DPAA_FMAN
 513 #define CONFIG_SYS_DPAA_PME
 514 /* Default address of microcode for the Linux Fman driver */
 515 #if defined(CONFIG_SPIFLASH)
 516 /*
 517  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 518  * env, so we got 0x110000.
 519  */
 520 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 521 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 522 #elif defined(CONFIG_SDCARD)
 523 /*
 524  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 525  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 526  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 527  */
 528 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 529 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 530 #elif defined(CONFIG_NAND)
 531 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 532 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 533 #elif defined(CONFIG_SRIOBOOT_SLAVE)
 534 /*
 535  * Slave has no ucode locally, it can fetch this from remote. When implementing
 536  * in two corenet boards, slave's ucode could be stored in master's memory
 537  * space, the address can be mapped from slave TLB->slave LAW->
 538  * slave SRIO outbound window->master inbound window->master LAW->
 539  * the ucode address in master's NOR flash.
 540  */
 541 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 542 #define CONFIG_SYS_QE_FMAN_FW_ADDR      NULL
 543 #else
 544 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 545 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEF000000
 546 #endif
 547 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 548 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 549
 550 #ifdef CONFIG_SYS_DPAA_FMAN
 551 #define CONFIG_FMAN_ENET
 552 #define CONFIG_PHYLIB_10G
 553 #define CONFIG_PHY_VITESSE
 554 #define CONFIG_PHY_TERANETICS
 555 #endif
 556
 557 #ifdef CONFIG_PCI
 558 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 559 #define CONFIG_E1000
 560
 561 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 562 #define CONFIG_DOS_PARTITION
 563 #endif  /* CONFIG_PCI */
 564
 565 /* SATA */
 566 #ifdef CONFIG_FSL_SATA_V2
 567 #define CONFIG_LIBATA
 568 #define CONFIG_FSL_SATA
 569
 570 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 571 #define CONFIG_SATA1
 572 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 573 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 574 #define CONFIG_SATA2
 575 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 576 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 577
 578 #define CONFIG_LBA48
 579 #define CONFIG_CMD_SATA
 580 #define CONFIG_DOS_PARTITION
 581 #define CONFIG_CMD_EXT2
 582 #endif
 583
 584 #ifdef CONFIG_FMAN_ENET
 585 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 586 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 587 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 588 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 589 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 590
 591 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 592 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 593 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 594 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 595 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 596
 597 #define CONFIG_SYS_TBIPA_VALUE  8
 598 #define CONFIG_MII              /* MII PHY management */
 599 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 600 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 601 #endif
 602
 603 /*
 604  * Environment
 605  */
 606 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 607 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 608
 609 /*
 610  * Command line configuration.
 611  */
 612 #include <config_cmd_default.h>
 613
 614 #define CONFIG_CMD_DHCP
 615 #define CONFIG_CMD_ELF
 616 #define CONFIG_CMD_ERRATA
 617 #define CONFIG_CMD_GREPENV
 618 #define CONFIG_CMD_IRQ
 619 #define CONFIG_CMD_I2C
 620 #define CONFIG_CMD_MII
 621 #define CONFIG_CMD_PING
 622 #define CONFIG_CMD_SETEXPR
 623 #define CONFIG_CMD_REGINFO
 624
 625 #ifdef CONFIG_PCI
 626 #define CONFIG_CMD_PCI
 627 #define CONFIG_CMD_NET
 628 #endif
 629
 630 /*
 631 * USB
 632 */
 633 #define CONFIG_CMD_USB
 634 #define CONFIG_USB_STORAGE
 635 #define CONFIG_USB_EHCI
 636 #define CONFIG_USB_EHCI_FSL
 637 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 638 #define CONFIG_CMD_EXT2
 639 #define CONFIG_HAS_FSL_DR_USB
 640
 641 #ifdef CONFIG_MMC
 642 #define CONFIG_FSL_ESDHC
 643 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 644 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 645 #define CONFIG_CMD_MMC
 646 #define CONFIG_GENERIC_MMC
 647 #define CONFIG_CMD_EXT2
 648 #define CONFIG_CMD_FAT
 649 #define CONFIG_DOS_PARTITION
 650 #endif
 651
 652 /*
 653  * Miscellaneous configurable options
 654  */
 655 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 656 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 657 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 658 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 659 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 660 #ifdef CONFIG_CMD_KGDB
 661 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 662 #else
 663 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 664 #endif
 665 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 666 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 667 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 668 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 669
 670 /*
 671  * For booting Linux, the board info and command line data
 672  * have to be in the first 64 MB of memory, since this is
 673  * the maximum mapped by the Linux kernel during initialization.
 674  */
 675 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 676 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 677
 678 #ifdef CONFIG_CMD_KGDB
 679 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 680 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 681 #endif
 682
 683 /*
 684  * Environment Configuration
 685  */
 686 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 687 #define CONFIG_BOOTFILE         "uImage"
 688 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 689
 690 /* default location for tftp and bootm */
 691 #define CONFIG_LOADADDR         1000000
 692
 693 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 694
 695 #define CONFIG_BAUDRATE 115200
 696
 697 #if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS)
 698 #define __USB_PHY_TYPE  ulpi
 699 #else
 700 #define __USB_PHY_TYPE  utmi
 701 #endif
 702
 703 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 704         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 705         "bank_intlv=cs0_cs1;"                                   \
 706         "usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\
 707         "netdev=eth0\0"                                         \
 708         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                  \
 709         "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"                  \
 710         "tftpflash=tftpboot $loadaddr $uboot && "               \
 711         "protect off $ubootaddr +$filesize && "                 \
 712         "erase $ubootaddr +$filesize && "                       \
 713         "cp.b $loadaddr $ubootaddr $filesize && "               \
 714         "protect on $ubootaddr +$filesize && "                  \
 715         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 716         "consoledev=ttyS0\0"                                    \
 717         "ramdiskaddr=2000000\0"                                 \
 718         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 719         "fdtaddr=c00000\0"                                      \
 720         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 721         "bdev=sda3\0"                                           \
 722         "c=ffe\0"
 723
 724 #define CONFIG_HDBOOT                                   \
 725         "setenv bootargs root=/dev/$bdev rw "           \
 726         "console=$consoledev,$baudrate $othbootargs;"   \
 727         "tftp $loadaddr $bootfile;"                     \
 728         "tftp $fdtaddr $fdtfile;"                       \
 729         "bootm $loadaddr - $fdtaddr"
 730
 731 #define CONFIG_NFSBOOTCOMMAND                   \
 732         "setenv bootargs root=/dev/nfs rw "     \
 733         "nfsroot=$serverip:$rootpath "          \
 734         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 735         "console=$consoledev,$baudrate $othbootargs;"   \
 736         "tftp $loadaddr $bootfile;"             \
 737         "tftp $fdtaddr $fdtfile;"               \
 738         "bootm $loadaddr - $fdtaddr"
 739
 740 #define CONFIG_RAMBOOTCOMMAND                           \
 741         "setenv bootargs root=/dev/ram rw "             \
 742         "console=$consoledev,$baudrate $othbootargs;"   \
 743         "tftp $ramdiskaddr $ramdiskfile;"               \
 744         "tftp $loadaddr $bootfile;"                     \
 745         "tftp $fdtaddr $fdtfile;"                       \
 746         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 747
 748 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 749
 750 #ifdef CONFIG_SECURE_BOOT
 751 #include <asm/fsl_secure_boot.h>
 752 #endif
 753
 754 #endif  /* __CONFIG_H */