include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #ifdef CONFIG_NXP_ESBC
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #define CONFIG_RAMBOOT_NAND
  23 #endif
  24 #define CONFIG_BOOTSCRIPT_COPY_RAM
  25 #else
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #endif
  29 #endif
  30
  31 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  32 /* Set 1M boot space */
  33 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  34 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  35                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  36 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  41
  42 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  43 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  44 #endif
  45
  46 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  47 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  48 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  49 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  50
  51 #if defined(CONFIG_SPIFLASH)
  52 #elif defined(CONFIG_SDCARD)
  53 #define CONFIG_FSL_FIXED_MMC_LOCATION
  54 #endif
  55
  56 /*
  57  * These can be toggled for performance analysis, otherwise use default.
  58  */
  59 #define CONFIG_SYS_CACHE_STASHING
  60 #define CONFIG_BACKSIDE_L2_CACHE
  61 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  62 #define CONFIG_BTB                      /* toggle branch predition */
  63 #ifdef CONFIG_DDR_ECC
  64 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  65 #endif
  66
  67 #define CONFIG_ENABLE_36BIT_PHYS
  68
  69 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  70
  71 /*
  72  *  Config the L3 Cache as L3 SRAM
  73  */
  74 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  75 #ifdef CONFIG_PHYS_64BIT
  76 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  77 #else
  78 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  79 #endif
  80 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  81 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  82
  83 #ifdef CONFIG_PHYS_64BIT
  84 #define CONFIG_SYS_DCSRBAR              0xf0000000
  85 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  86 #endif
  87
  88 /* EEPROM */
  89 #define CONFIG_SYS_I2C_EEPROM_NXID
  90 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  91
  92 /*
  93  * DDR Setup
  94  */
  95 #define CONFIG_VERY_BIG_RAM
  96 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  97 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  98
  99 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 100 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 101
 102 #define CONFIG_SYS_SPD_BUS_NUM  1
 103 #define SPD_EEPROM_ADDRESS1     0x51
 104 #define SPD_EEPROM_ADDRESS2     0x52
 105 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 106 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 107
 108 /*
 109  * Local Bus Definitions
 110  */
 111
 112 /* Set the local bus clock 1/8 of platform clock */
 113 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 114
 115 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 116 #ifdef CONFIG_PHYS_64BIT
 117 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 118 #else
 119 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 120 #endif
 121
 122 #define CONFIG_SYS_FLASH_BR_PRELIM \
 123                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 124                  | BR_PS_16 | BR_V)
 125 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 126                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 127
 128 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 129 #ifdef CONFIG_PHYS_64BIT
 130 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 131 #else
 132 #define PIXIS_BASE_PHYS         PIXIS_BASE
 133 #endif
 134
 135 #define PIXIS_LBMAP_SWITCH      7
 136 #define PIXIS_LBMAP_MASK        0xf0
 137 #define PIXIS_LBMAP_SHIFT       4
 138 #define PIXIS_LBMAP_ALTBANK     0x40
 139
 140 #define CONFIG_SYS_FLASH_QUIET_TEST
 141 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 142
 143 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 144 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 145 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 146
 147 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 148
 149 #if defined(CONFIG_RAMBOOT_PBL)
 150 #define CONFIG_SYS_RAMBOOT
 151 #endif
 152
 153 /* Nand Flash */
 154 #ifdef CONFIG_NAND_FSL_ELBC
 155 #define CONFIG_SYS_NAND_BASE            0xffa00000
 156 #ifdef CONFIG_PHYS_64BIT
 157 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 158 #else
 159 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 160 #endif
 161
 162 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 163 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 164
 165 /* NAND flash config */
 166 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 167                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 168                                | BR_PS_8               /* Port Size = 8 bit */ \
 169                                | BR_MS_FCM             /* MSEL = FCM */ \
 170                                | BR_V)                 /* valid */
 171 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 172                                | OR_FCM_PGS            /* Large Page*/ \
 173                                | OR_FCM_CSCT \
 174                                | OR_FCM_CST \
 175                                | OR_FCM_CHT \
 176                                | OR_FCM_SCY_1 \
 177                                | OR_FCM_TRLX \
 178                                | OR_FCM_EHTR)
 179 #endif /* CONFIG_NAND_FSL_ELBC */
 180
 181 #define CONFIG_SYS_FLASH_EMPTY_INFO
 182 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 183
 184 #define CONFIG_HWCONFIG
 185
 186 /* define to use L1 as initial stack */
 187 #define CONFIG_L1_INIT_RAM
 188 #define CONFIG_SYS_INIT_RAM_LOCK
 189 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 190 #ifdef CONFIG_PHYS_64BIT
 191 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 192 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 193 /* The assembler doesn't like typecast */
 194 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 195         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 196           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 197 #else
 198 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 199 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 200 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 201 #endif
 202 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 203
 204 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 205 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 206
 207 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 208
 209 /* Serial Port - controlled on board with jumper J8
 210  * open - index 2
 211  * shorted - index 1
 212  */
 213 #define CONFIG_SYS_NS16550_SERIAL
 214 #define CONFIG_SYS_NS16550_REG_SIZE     1
 215 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 216
 217 #define CONFIG_SYS_BAUDRATE_TABLE       \
 218         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 219
 220 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 221 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 222 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 223 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 224
 225 /* I2C */
 226
 227 /*
 228  * RapidIO
 229  */
 230 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 231 #ifdef CONFIG_PHYS_64BIT
 232 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 233 #else
 234 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 235 #endif
 236 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 237
 238 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 239 #ifdef CONFIG_PHYS_64BIT
 240 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 241 #else
 242 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 243 #endif
 244 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 245
 246 /*
 247  * for slave u-boot IMAGE instored in master memory space,
 248  * PHYS must be aligned based on the SIZE
 249  */
 250 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 251 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 252 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 253 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 254 /*
 255  * for slave UCODE and ENV instored in master memory space,
 256  * PHYS must be aligned based on the SIZE
 257  */
 258 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 259 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 260 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 261
 262 /* slave core release by master*/
 263 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 264 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 265
 266 /*
 267  * SRIO_PCIE_BOOT - SLAVE
 268  */
 269 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 270 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 271 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 272                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 273 #endif
 274
 275 /*
 276  * eSPI - Enhanced SPI
 277  */
 278
 279 /*
 280  * General PCI
 281  * Memory space is mapped 1-1, but I/O space must start from 0.
 282  */
 283
 284 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 285 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 286 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 287 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 288 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 289
 290 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 291 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 292 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 293 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 294 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 295
 296 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 297 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 298 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 299 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 300 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 301
 302 /* controller 4, Base address 203000 */
 303 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 304 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 305
 306 /* Qman/Bman */
 307 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 308 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 309 #ifdef CONFIG_PHYS_64BIT
 310 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 311 #else
 312 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 313 #endif
 314 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 315 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 316 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 317 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 318 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 319 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 320                                         CONFIG_SYS_BMAN_CENA_SIZE)
 321 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 322 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 323 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 324 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 325 #ifdef CONFIG_PHYS_64BIT
 326 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 327 #else
 328 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 329 #endif
 330 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 331 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 332 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 333 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 334 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 335 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 336                                         CONFIG_SYS_QMAN_CENA_SIZE)
 337 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 338 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 339
 340 #define CONFIG_SYS_DPAA_FMAN
 341 #define CONFIG_SYS_DPAA_PME
 342 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 343
 344 #ifdef CONFIG_PCI
 345 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 346 #endif  /* CONFIG_PCI */
 347
 348 /* SATA */
 349 #ifdef CONFIG_FSL_SATA_V2
 350 #define CONFIG_SATA1
 351 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 352 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 353 #define CONFIG_SATA2
 354 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 355 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 356
 357 #define CONFIG_LBA48
 358 #endif
 359
 360 #ifdef CONFIG_FMAN_ENET
 361 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 362 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 363 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 364 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 365 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 366
 367 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 368 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 369 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 370 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 371 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 372
 373 #define CONFIG_SYS_TBIPA_VALUE  8
 374 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 375 #endif
 376
 377 /*
 378  * Environment
 379  */
 380 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 381 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 382
 383 /*
 384 * USB
 385 */
 386 #define CONFIG_HAS_FSL_DR_USB
 387 #define CONFIG_HAS_FSL_MPH_USB
 388
 389 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 390 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 391 #endif
 392
 393 #ifdef CONFIG_MMC
 394 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 395 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 396 #endif
 397
 398 /*
 399  * Miscellaneous configurable options
 400  */
 401
 402 /*
 403  * For booting Linux, the board info and command line data
 404  * have to be in the first 64 MB of memory, since this is
 405  * the maximum mapped by the Linux kernel during initialization.
 406  */
 407 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 408 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 409
 410 /*
 411  * Environment Configuration
 412  */
 413 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 414 #define CONFIG_BOOTFILE         "uImage"
 415 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 416
 417 #ifdef CONFIG_TARGET_P4080DS
 418 #define __USB_PHY_TYPE  ulpi
 419 #else
 420 #define __USB_PHY_TYPE  utmi
 421 #endif
 422
 423 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 424         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 425         "bank_intlv=cs0_cs1;"                                   \
 426         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 427         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 428         "netdev=eth0\0"                                         \
 429         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 430         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 431         "tftpflash=tftpboot $loadaddr $uboot && "               \
 432         "protect off $ubootaddr +$filesize && "                 \
 433         "erase $ubootaddr +$filesize && "                       \
 434         "cp.b $loadaddr $ubootaddr $filesize && "               \
 435         "protect on $ubootaddr +$filesize && "                  \
 436         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 437         "consoledev=ttyS0\0"                                    \
 438         "ramdiskaddr=2000000\0"                                 \
 439         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 440         "fdtaddr=1e00000\0"                                     \
 441         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 442         "bdev=sda3\0"
 443
 444 #include <asm/fsl_secure_boot.h>
 445
 446 #endif  /* __CONFIG_H */