include/configs/corenet_ds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #ifdef CONFIG_NXP_ESBC
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #define CONFIG_RAMBOOT_NAND
  23 #endif
  24 #define CONFIG_BOOTSCRIPT_COPY_RAM
  25 #else
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  29 #if defined(CONFIG_TARGET_P3041DS)
  30 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  31 #elif defined(CONFIG_TARGET_P4080DS)
  32 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  33 #elif defined(CONFIG_TARGET_P5020DS)
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  35 #elif defined(CONFIG_TARGET_P5040DS)
  36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  37 #endif
  38 #endif
  39 #endif
  40
  41 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  42 /* Set 1M boot space */
  43 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  44 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  45                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  46 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  47 #endif
  48
  49 /* High Level Configuration Options */
  50 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  51
  52 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  53 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  54 #endif
  55
  56 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  57 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  58 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  60 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  61
  62 #if defined(CONFIG_SPIFLASH)
  63 #elif defined(CONFIG_SDCARD)
  64 #define CONFIG_FSL_FIXED_MMC_LOCATION
  65 #endif
  66
  67 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  68
  69 /*
  70  * These can be toggled for performance analysis, otherwise use default.
  71  */
  72 #define CONFIG_SYS_CACHE_STASHING
  73 #define CONFIG_BACKSIDE_L2_CACHE
  74 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  75 #define CONFIG_BTB                      /* toggle branch predition */
  76 #ifdef CONFIG_DDR_ECC
  77 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  78 #endif
  79
  80 #define CONFIG_ENABLE_36BIT_PHYS
  81
  82 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
  83
  84 /*
  85  *  Config the L3 Cache as L3 SRAM
  86  */
  87 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  88 #ifdef CONFIG_PHYS_64BIT
  89 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  90 #else
  91 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  92 #endif
  93 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  94 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  95
  96 #ifdef CONFIG_PHYS_64BIT
  97 #define CONFIG_SYS_DCSRBAR              0xf0000000
  98 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  99 #endif
 100
 101 /* EEPROM */
 102 #define CONFIG_SYS_I2C_EEPROM_NXID
 103 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 104
 105 /*
 106  * DDR Setup
 107  */
 108 #define CONFIG_VERY_BIG_RAM
 109 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 110 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 111
 112 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 113 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 114
 115 #define CONFIG_SYS_SPD_BUS_NUM  1
 116 #define SPD_EEPROM_ADDRESS1     0x51
 117 #define SPD_EEPROM_ADDRESS2     0x52
 118 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 119 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 120
 121 /*
 122  * Local Bus Definitions
 123  */
 124
 125 /* Set the local bus clock 1/8 of platform clock */
 126 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 127
 128 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 129 #ifdef CONFIG_PHYS_64BIT
 130 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 131 #else
 132 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 133 #endif
 134
 135 #define CONFIG_SYS_FLASH_BR_PRELIM \
 136                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 137                  | BR_PS_16 | BR_V)
 138 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 139                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 140
 141 #define CONFIG_SYS_BR1_PRELIM \
 142         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 143 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 144
 145 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 146 #ifdef CONFIG_PHYS_64BIT
 147 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 148 #else
 149 #define PIXIS_BASE_PHYS         PIXIS_BASE
 150 #endif
 151
 152 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 153 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 154
 155 #define PIXIS_LBMAP_SWITCH      7
 156 #define PIXIS_LBMAP_MASK        0xf0
 157 #define PIXIS_LBMAP_SHIFT       4
 158 #define PIXIS_LBMAP_ALTBANK     0x40
 159
 160 #define CONFIG_SYS_FLASH_QUIET_TEST
 161 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 162
 163 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 164 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 165 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 166 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 167
 168 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 169
 170 #if defined(CONFIG_RAMBOOT_PBL)
 171 #define CONFIG_SYS_RAMBOOT
 172 #endif
 173
 174 /* Nand Flash */
 175 #ifdef CONFIG_NAND_FSL_ELBC
 176 #define CONFIG_SYS_NAND_BASE            0xffa00000
 177 #ifdef CONFIG_PHYS_64BIT
 178 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 179 #else
 180 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 181 #endif
 182
 183 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 184 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 185 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 186
 187 /* NAND flash config */
 188 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 189                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 190                                | BR_PS_8               /* Port Size = 8 bit */ \
 191                                | BR_MS_FCM             /* MSEL = FCM */ \
 192                                | BR_V)                 /* valid */
 193 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 194                                | OR_FCM_PGS            /* Large Page*/ \
 195                                | OR_FCM_CSCT \
 196                                | OR_FCM_CST \
 197                                | OR_FCM_CHT \
 198                                | OR_FCM_SCY_1 \
 199                                | OR_FCM_TRLX \
 200                                | OR_FCM_EHTR)
 201
 202 #ifdef CONFIG_MTD_RAW_NAND
 203 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 204 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 205 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 206 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 207 #else
 208 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 209 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 210 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 211 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 212 #endif
 213 #else
 214 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 215 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 216 #endif /* CONFIG_NAND_FSL_ELBC */
 217
 218 #define CONFIG_SYS_FLASH_EMPTY_INFO
 219 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 220 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 221
 222 #define CONFIG_HWCONFIG
 223
 224 /* define to use L1 as initial stack */
 225 #define CONFIG_L1_INIT_RAM
 226 #define CONFIG_SYS_INIT_RAM_LOCK
 227 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 228 #ifdef CONFIG_PHYS_64BIT
 229 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 230 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 231 /* The assembler doesn't like typecast */
 232 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 233         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 234           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 235 #else
 236 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 237 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 238 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 239 #endif
 240 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 241
 242 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 243 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 244
 245 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 246 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 247
 248 /* Serial Port - controlled on board with jumper J8
 249  * open - index 2
 250  * shorted - index 1
 251  */
 252 #define CONFIG_SYS_NS16550_SERIAL
 253 #define CONFIG_SYS_NS16550_REG_SIZE     1
 254 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 255
 256 #define CONFIG_SYS_BAUDRATE_TABLE       \
 257         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 258
 259 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 260 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 261 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 262 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 263
 264 /* I2C */
 265
 266 /*
 267  * RapidIO
 268  */
 269 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 270 #ifdef CONFIG_PHYS_64BIT
 271 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 272 #else
 273 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 274 #endif
 275 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 276
 277 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 278 #ifdef CONFIG_PHYS_64BIT
 279 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 280 #else
 281 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 282 #endif
 283 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 284
 285 /*
 286  * for slave u-boot IMAGE instored in master memory space,
 287  * PHYS must be aligned based on the SIZE
 288  */
 289 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 290 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 291 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 292 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 293 /*
 294  * for slave UCODE and ENV instored in master memory space,
 295  * PHYS must be aligned based on the SIZE
 296  */
 297 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 298 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 299 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 300
 301 /* slave core release by master*/
 302 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 303 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 304
 305 /*
 306  * SRIO_PCIE_BOOT - SLAVE
 307  */
 308 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 309 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 310 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 311                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 312 #endif
 313
 314 /*
 315  * eSPI - Enhanced SPI
 316  */
 317
 318 /*
 319  * General PCI
 320  * Memory space is mapped 1-1, but I/O space must start from 0.
 321  */
 322
 323 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 324 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 325 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 326 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 327 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 328
 329 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 330 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 331 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 332 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 333 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 334
 335 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 336 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 337 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 338 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 339 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 340
 341 /* controller 4, Base address 203000 */
 342 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 343 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 344
 345 /* Qman/Bman */
 346 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 347 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 348 #ifdef CONFIG_PHYS_64BIT
 349 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 350 #else
 351 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 352 #endif
 353 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 354 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 355 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 356 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 357 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 358 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 359                                         CONFIG_SYS_BMAN_CENA_SIZE)
 360 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 361 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 362 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 363 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 364 #ifdef CONFIG_PHYS_64BIT
 365 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 366 #else
 367 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 368 #endif
 369 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 370 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 371 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 372 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 373 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 374 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 375                                         CONFIG_SYS_QMAN_CENA_SIZE)
 376 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 377 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 378
 379 #define CONFIG_SYS_DPAA_FMAN
 380 #define CONFIG_SYS_DPAA_PME
 381 /* Default address of microcode for the Linux Fman driver */
 382 #if defined(CONFIG_SPIFLASH)
 383 /*
 384  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 385  * env, so we got 0x110000.
 386  */
 387 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 388 #elif defined(CONFIG_SDCARD)
 389 /*
 390  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 391  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 392  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 393  */
 394 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 395 #elif defined(CONFIG_MTD_RAW_NAND)
 396 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 397 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 398 /*
 399  * Slave has no ucode locally, it can fetch this from remote. When implementing
 400  * in two corenet boards, slave's ucode could be stored in master's memory
 401  * space, the address can be mapped from slave TLB->slave LAW->
 402  * slave SRIO or PCIE outbound window->master inbound window->
 403  * master LAW->the ucode address in master's memory space.
 404  */
 405 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 406 #else
 407 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 408 #endif
 409 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 410 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 411
 412 #ifdef CONFIG_PCI
 413 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 414 #endif  /* CONFIG_PCI */
 415
 416 /* SATA */
 417 #ifdef CONFIG_FSL_SATA_V2
 418 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 419 #define CONFIG_SATA1
 420 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 421 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 422 #define CONFIG_SATA2
 423 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 424 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 425
 426 #define CONFIG_LBA48
 427 #endif
 428
 429 #ifdef CONFIG_FMAN_ENET
 430 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 431 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 432 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 433 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 434 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 435
 436 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 437 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 438 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 439 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 440 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 441
 442 #define CONFIG_SYS_TBIPA_VALUE  8
 443 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 444 #endif
 445
 446 /*
 447  * Environment
 448  */
 449 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 450 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 451
 452 /*
 453 * USB
 454 */
 455 #define CONFIG_HAS_FSL_DR_USB
 456 #define CONFIG_HAS_FSL_MPH_USB
 457
 458 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 459 #define CONFIG_USB_EHCI_FSL
 460 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 461 #endif
 462
 463 #ifdef CONFIG_MMC
 464 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 465 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 466 #endif
 467
 468 /*
 469  * Miscellaneous configurable options
 470  */
 471 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 472
 473 /*
 474  * For booting Linux, the board info and command line data
 475  * have to be in the first 64 MB of memory, since this is
 476  * the maximum mapped by the Linux kernel during initialization.
 477  */
 478 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 479 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 480
 481 #ifdef CONFIG_CMD_KGDB
 482 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 483 #endif
 484
 485 /*
 486  * Environment Configuration
 487  */
 488 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 489 #define CONFIG_BOOTFILE         "uImage"
 490 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 491
 492 #ifdef CONFIG_TARGET_P4080DS
 493 #define __USB_PHY_TYPE  ulpi
 494 #else
 495 #define __USB_PHY_TYPE  utmi
 496 #endif
 497
 498 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 499         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 500         "bank_intlv=cs0_cs1;"                                   \
 501         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 502         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 503         "netdev=eth0\0"                                         \
 504         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 505         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 506         "tftpflash=tftpboot $loadaddr $uboot && "               \
 507         "protect off $ubootaddr +$filesize && "                 \
 508         "erase $ubootaddr +$filesize && "                       \
 509         "cp.b $loadaddr $ubootaddr $filesize && "               \
 510         "protect on $ubootaddr +$filesize && "                  \
 511         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 512         "consoledev=ttyS0\0"                                    \
 513         "ramdiskaddr=2000000\0"                                 \
 514         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 515         "fdtaddr=1e00000\0"                                     \
 516         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 517         "bdev=sda3\0"
 518
 519 #define HDBOOT                                  \
 520         "setenv bootargs root=/dev/$bdev rw "           \
 521         "console=$consoledev,$baudrate $othbootargs;"   \
 522         "tftp $loadaddr $bootfile;"                     \
 523         "tftp $fdtaddr $fdtfile;"                       \
 524         "bootm $loadaddr - $fdtaddr"
 525
 526 #define NFSBOOTCOMMAND                  \
 527         "setenv bootargs root=/dev/nfs rw "     \
 528         "nfsroot=$serverip:$rootpath "          \
 529         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 530         "console=$consoledev,$baudrate $othbootargs;"   \
 531         "tftp $loadaddr $bootfile;"             \
 532         "tftp $fdtaddr $fdtfile;"               \
 533         "bootm $loadaddr - $fdtaddr"
 534
 535 #define RAMBOOTCOMMAND                          \
 536         "setenv bootargs root=/dev/ram rw "             \
 537         "console=$consoledev,$baudrate $othbootargs;"   \
 538         "tftp $ramdiskaddr $ramdiskfile;"               \
 539         "tftp $loadaddr $bootfile;"                     \
 540         "tftp $fdtaddr $fdtfile;"                       \
 541         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 542
 543 #define CONFIG_BOOTCOMMAND              HDBOOT
 544
 545 #include <asm/fsl_secure_boot.h>
 546
 547 #endif  /* __CONFIG_H */