1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
7 #ifndef _CONFIG_CONTROLCENTERDC_H
8 #define _CONFIG_CONTROLCENTERDC_H
11 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
12 * for DDR ECC byte filling in the SPL before loading the main
16 /* Environment in SPI NOR flash */
18 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
21 #define CONFIG_PCI_SCAN_SHOW
24 * Environment Configuration
27 #define CONFIG_HOSTNAME "ccdc"
28 #define CONFIG_ROOTPATH "/opt/nfsroot"
30 #define CONFIG_EXTRA_ENV_SETTINGS \
32 "consoledev=ttyS1\0" \
33 "u-boot=u-boot.bin\0" \
34 "bootfile_addr=1000000\0" \
35 "keyprogram_addr=3000000\0" \
36 "keyprogram_file=keyprogram.img\0" \
37 "fdtfile=controlcenterdc.dtb\0" \
38 "load=tftpboot ${loadaddr} ${u-boot}\0" \
40 "update=sf probe 1:0;" \
41 " sf erase 0 +${filesize};" \
42 " sf write ${fileaddr} 0 ${filesize}\0" \
43 "upd=run load update\0" \
44 "fdt_high=0x10000000\0" \
45 "initrd_high=0x10000000\0" \
46 "loadkeyprogram=tpm flush_keys;" \
48 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
49 " source ${keyprogram_addr}:script@1\0" \
50 "gpio1=gpio@22_25\0" \
52 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \
53 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \
54 "bootfail=for i in ${blinkseq}; do" \
55 " if test $i -eq 0; then" \
56 " gpio clear ${gpio1}; gpio set ${gpio2};" \
57 " elif test $i -eq 1; then" \
58 " gpio clear ${gpio1}; gpio clear ${gpio2};" \
59 " elif test $i -eq 2; then" \
60 " gpio set ${gpio1}; gpio set ${gpio2};" \
62 " gpio clear ${gpio1}; gpio set ${gpio2};" \
63 " fi; sleep 0.12; done\0"
66 * mv-common.h should be defined after CMD configs since it used them
67 * to enable certain macros
69 #include "mv-common.h"
71 #endif /* _CONFIG_CONTROLCENTERDC_H */