configs: Migrate CONFIG_SPL_FRAMEWORK
[platform/kernel/u-boot.git] / include / configs / controlcenterdc.h
1 /*
2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
3  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef _CONFIG_CONTROLCENTERDC_H
9 #define _CONFIG_CONTROLCENTERDC_H
10
11 /*
12  * High Level Configuration Options (easy to change)
13  */
14 #define CONFIG_CUSTOMER_BOARD_SUPPORT
15
16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
17 #define CONFIG_DISPLAY_BOARDINFO_LATE
18 #define CONFIG_BOARD_LATE_INIT
19 #define CONFIG_LAST_STAGE_INIT
20
21 /*
22  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
23  * for DDR ECC byte filling in the SPL before loading the main
24  * U-Boot into it.
25  */
26
27 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
28
29 #define CONFIG_LOADADDR                 1000000
30
31 /*
32  * Commands configuration
33  */
34 #define CONFIG_CMD_I2C
35 #define CONFIG_CMD_SPI
36
37 /* SPI NOR flash default params, used by sf commands */
38 #define CONFIG_SF_DEFAULT_BUS           1
39 #define CONFIG_SF_DEFAULT_SPEED         1000000
40 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
41
42 /*
43  * SDIO/MMC Card Configuration
44  */
45 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
46
47 /*
48  * SATA/SCSI/AHCI configuration
49  */
50 #define CONFIG_SCSI_AHCI_PLAT
51 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
52 #define CONFIG_SYS_SCSI_MAX_LUN         1
53 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
54                                          CONFIG_SYS_SCSI_MAX_LUN)
55
56 /* USB/EHCI configuration */
57 #define CONFIG_EHCI_IS_TDI
58
59 /* Environment in SPI NOR flash */
60 #define CONFIG_ENV_SPI_BUS              1
61 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
62 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
63 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
64
65 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
66 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
67
68 /* PCIe support */
69 #ifndef CONFIG_SPL_BUILD
70 #define CONFIG_PCI
71 #define CONFIG_PCI_MVEBU
72 #define CONFIG_PCI_PNP
73 #define CONFIG_PCI_SCAN_SHOW
74 #endif
75
76 #define CONFIG_SYS_ALT_MEMTEST
77
78 /*
79  * Software (bit-bang) MII driver configuration
80  */
81 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
82 #define CONFIG_BITBANGMII_MULTI
83
84 /* SPL */
85 /*
86  * Select the boot device here
87  *
88  * Currently supported are:
89  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
90  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
91  */
92 #define SPL_BOOT_SPI_NOR_FLASH          1
93 #define SPL_BOOT_SDIO_MMC_CARD          2
94 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
95
96 /* Defines for SPL */
97 #define CONFIG_SPL_SIZE                 (160 << 10)
98
99 #if defined(CONFIG_SECURED_MODE_IMAGE)
100 #define CONFIG_SPL_TEXT_BASE            0x40002614
101 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
102 #else
103 #define CONFIG_SPL_TEXT_BASE            0x40000030
104 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
105 #endif
106
107 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
108 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
109
110 #ifdef CONFIG_SPL_BUILD
111 #define CONFIG_SYS_MALLOC_SIMPLE
112 #endif
113
114 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
115 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
116
117 #define CONFIG_SPL_LIBCOMMON_SUPPORT
118 #define CONFIG_SPL_LIBGENERIC_SUPPORT
119 #define CONFIG_SPL_SERIAL_SUPPORT
120 #define CONFIG_SPL_I2C_SUPPORT
121
122 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
123 /* SPL related SPI defines */
124 #define CONFIG_SPL_SPI_LOAD
125 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x30000
126 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
127 #endif
128
129 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
130 /* SPL related MMC defines */
131 #define CONFIG_SPL_MMC_SUPPORT
132 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
133 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
134 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
135 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
136 #ifdef CONFIG_SPL_BUILD
137 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
138 #endif
139 #endif
140
141 /*
142  * Environment Configuration
143  */
144 #define CONFIG_ENV_OVERWRITE
145
146 #define CONFIG_BAUDRATE 115200
147
148 #define CONFIG_HOSTNAME         ccdc
149 #define CONFIG_ROOTPATH         "/opt/nfsroot"
150 #define CONFIG_BOOTFILE         "ccdc.img"
151
152 #define CONFIG_PREBOOT          /* enable preboot variable */
153
154 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
155         "netdev=eth1\0"                                         \
156         "consoledev=ttyS1\0"                                                    \
157         "u-boot=u-boot.bin\0"                                                   \
158         "bootfile_addr=1000000\0"                                               \
159         "keyprogram_addr=3000000\0"                                             \
160         "keyprogram_file=keyprogram.img\0"                                              \
161         "fdtfile=controlcenterdc.dtb\0"                                         \
162         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
163         "mmcdev=0:2\0"                                                          \
164         "update=sf probe 1:0;"                                                  \
165                 " sf erase 0 +${filesize};"                                     \
166                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
167         "upd=run load update\0"                                                 \
168         "fdt_high=0x10000000\0"                                                 \
169         "initrd_high=0x10000000\0"                                              \
170         "loadkeyprogram=tpm flush_keys;"                                        \
171                 " mmc rescan;"                                                  \
172                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
173                 " source ${keyprogram_addr}:script@1\0"                         \
174         "gpio1=gpio@22_25\0"                                                    \
175         "gpio2=A29\0"                                                           \
176         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
177                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
178         "bootfail=for i in ${blinkseq}; do"                                     \
179                 " if test $i -eq 0; then"                                       \
180                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
181                 " elif test $i -eq 1; then"                                     \
182                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
183                 " elif test $i -eq 2; then"                                     \
184                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
185                 " else;"                                                        \
186                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
187                 " fi; sleep 0.12; done\0"
188
189 #define CONFIG_NFSBOOTCOMMAND                                                           \
190         "setenv bootargs root=/dev/nfs rw "                                             \
191         "nfsroot=${serverip}:${rootpath} "                                              \
192         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
193         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
194         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
195         "bootm ${bootfile_addr}"
196
197 #define CONFIG_MMCBOOTCOMMAND                                   \
198         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
199         "console=${consoledev},${baudrate} ${othbootargs}; "    \
200         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
201         "bootm ${bootfile_addr}"
202
203 #define CONFIG_BOOTCOMMAND                      \
204         "if env exists keyprogram; then;"       \
205         " setenv keyprogram; run nfsboot;"      \
206         " fi;"                                  \
207         " run dobootfail"
208
209 /*
210  * mv-common.h should be defined after CMD configs since it used them
211  * to enable certain macros
212  */
213 #include "mv-common.h"
214
215 #endif /* _CONFIG_CONTROLCENTERDC_H */